Discussion:
automount für eis
(zu alt für eine Antwort)
Daniel Kubein
2020-06-04 03:58:08 UTC
Permalink
base: 2.8.25 / eiskernel: 4.9.220-eisfair-64-VIRT

Hallo,

gibt es eigentlich automount für den eis?

Ich würde gern
/dev/sda1 on /media/usb/sda1 type ext4 (rw,relatime,data=ordered)
mit jedem neustart automatisch mounten lassen wollen, statt es
jedes Mal manuell zu mounten.

Gruß Daniel
Marcus Röckrath
2020-06-04 05:33:29 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
gibt es eigentlich automount für den eis?
Ich würde gern
/dev/sda1 on /media/usb/sda1 type ext4 (rw,relatime,data=ordered)
mit jedem neustart automatisch mounten lassen wollen, statt es
jedes Mal manuell zu mounten.
Warum nicht in die fstab eintragen?
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-06-05 05:25:25 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Warum nicht in die fstab eintragen?
Das war zu einfach.
Danke, habe ich irgendwie nicht dran gedacht.

Gruß
Marcus Röckrath
2020-06-05 13:08:27 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Warum nicht in die fstab eintragen?
Das war zu einfach.
Danke, habe ich irgendwie nicht dran gedacht.
Kommt vor. :-))

Das meiste ist irgendwie sehr simpel, man denkt nur nicht dran.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-06-05 05:37:47 UTC
Permalink
Hallo Markus,

ich glaub ich bin doch eingerostet.

Ich habe mir die Info's die ich brauche geholt ->

eis 2.8.25 # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sdb3 153G 4.1G 141G 3% /
tmpfs 7.8G 508K 7.8G 1% /run
devtmpfs 7.8G 0 7.8G 0% /dev
/dev/sdb1 89M 41M 42M 50% /boot
/dev/sdb4 762G 73M 723G 1% /data
tmpfs 7.8G 0 7.8G 0% /run/shm
/dev/sda1 234G 60M 222G 1% /media/usb/sda1
eis 2.8.25 # sudo blkid
/dev/sda1: LABEL="nvme_data" UUID="ce8cba0c-fdd6-4415-aa12-abb1a343b002"
TYPE="ext4" PARTUUID="1ef3d9df-01"
/dev/sdb1: UUID="96b39d14-4554-46c3-871b-9607bbb5eef8" TYPE="ext4"
PARTLABEL="boot" PARTUUID="b49e8a6e-5dc3-4900-985f-ea1604d2dba6"
/dev/sdb2: UUID="3fad3781-93f3-4959-9d18-8dd4cf98e7a3" TYPE="swap"
PARTLABEL="swap" PARTUUID="67a9d264-4df8-4efa-a835-a624a66f06bb"
/dev/sdb3: UUID="93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31" TYPE="ext4"
PARTLABEL="root" PARTUUID="bba0ded7-e66c-4796-8d67-d3bd062e1638"
/dev/sdb4: UUID="92bdef30-9c4e-44e3-acf9-38abf1b10427" TYPE="ext4"
PARTLABEL="data" PARTUUID="a93f5fed-58c3-4570-b086-8ebc3c8751da"


In die FSTAB möchte ich das Laufwerk
/dev/sda1
eintragen und die FSTAB habe ich wie folgt editiert ->
UUID="ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2

Das sollte ja schon reichen, oder?

Danke und Gruß Daniel
Holger Bruenjes
2020-06-05 06:45:57 UTC
Permalink
Hallo Daniel
Post by Daniel Kubein
In die FSTAB möchte ich das Laufwerk
/dev/sda1
eintragen und die FSTAB habe ich wie folgt editiert ->
UUID="ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2
^^^^
Post by Daniel Kubein
Das sollte ja schon reichen, oder?
ja, aber ohne "

Holger
Daniel Kubein
2020-06-08 04:23:30 UTC
Permalink
Hallo
Post by Holger Bruenjes
ja, aber ohne "
Oops. Danke für den Hinweis.

Grüße
Marcus Röckrath
2020-06-05 13:10:37 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
/dev/sda1: LABEL="nvme_data" UUID="ce8cba0c-fdd6-4415-aa12-abb1a343b002"
TYPE="ext4" PARTUUID="1ef3d9df-01"
In die FSTAB möchte ich das Laufwerk
/dev/sda1
eintragen und die FSTAB habe ich wie folgt editiert ->
UUID="ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2
Der " ist falsch, ansonsten ist das korrekt so.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-06-19 04:09:50 UTC
Permalink
Hallo Marcus,

ich habe heute bei einem Reboot fest gestellt, dass es gar nicht klappt.

Meine fstab sieht aktuell so aus ->


UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 / ext4
defaults,errors=remount-ro 0 1
UUID=96b39d14-4554-46c3-871b-9607bbb5eef8 /boot ext4
defaults,errors=remount-ro 0 1
UUID=3fad3781-93f3-4959-9d18-8dd4cf98e7a3 none swap sw 0 0
UUID=92bdef30-9c4e-44e3-acf9-38abf1b10427 /data ext4 defaults 0 2
UUID=ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2
proc /proc proc defaults 0 0
/dev/fd0 /media/floppy auto defaults,user,noauto 0 0
/dev/cdrom /media/cdrom iso9660 defaults,ro,user,noauto 0 0
devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
/sys /sys sysfs defaults 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
tmpfs /run tmpfs defaults 0 0
devtmpfs /dev devtmpfs mode=0755,nosuid 0 0


Und ich habe nur, dass Folgende eingetragen ->

UUID=ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2

<- war das zu wenig?


Gruß Daniel
Marcus Röckrath
2020-06-19 04:58:21 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
ich habe heute bei einem Reboot fest gestellt, dass es gar nicht klappt.
[fstab]
Post by Daniel Kubein
Und ich habe nur, dass Folgende eingetragen ->
UUID=ce8cba0c-fdd6-4415-aa12-abb1a343b002 /nvme_data ext4 defaults 0 2
<- war das zu wenig?
Muss für nvme nicht auch ein Modul geladen werden?

Kannst du das nvme-Laufwerk nachträglich manuell mounten?
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-06-19 06:02:31 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Muss für nvme nicht auch ein Modul geladen werden?
Kannst du das nvme-Laufwerk nachträglich manuell mounten?
ja, nachträglich kann man das absolut problemlos mounten.
Einmal Enter und tschack, da.

Gruß
Marcus Röckrath
2020-06-19 06:18:43 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Muss für nvme nicht auch ein Modul geladen werden?
Kannst du das nvme-Laufwerk nachträglich manuell mounten?
ja, nachträglich kann man das absolut problemlos mounten.
Einmal Enter und tschack, da.
Bitte mit

dmesg

nachsehen, welche Fehlermeldung erscheint, oder schick mir mal den Ouput von
dmes zu.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-08-05 03:02:43 UTC
Permalink
Hallo Marcus,

sorry, ich bin jetzt wirklich lange zu nichts gekommen und ich
hoffe du erinnerst dich noch.
Post by Marcus Röckrath
Post by Daniel Kubein
Post by Marcus Röckrath
Muss für nvme nicht auch ein Modul geladen werden?
Kannst du das nvme-Laufwerk nachträglich manuell mounten?
ja, nachträglich kann man das absolut problemlos mounten.
Einmal Enter und tschack, da.
Bitte mit
dmesg
nachsehen, welche Fehlermeldung erscheint, oder schick mir mal den Ouput von
dmes zu.
Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb3 ext4 153G 16G 130G 11% /
tmpfs tmpfs 7.8G 508K 7.8G 1% /run
devtmpfs devtmpfs 7.8G 4.0K 7.8G 1% /dev
/dev/sdb1 ext4 89M 41M 42M 50% /boot
/dev/sdb4 ext4 762G 73M 723G 1% /data
tmpfs tmpfs 7.8G 0 7.8G 0% /run/shm
/dev/sda1 ext4 234G 60M 222G 1% /media/usb/sda1



eis 2.8.25 # dmesg
[ 0.000000] microcode: microcode updated early to revision 0xca, date
= 2019-10-03
[ 0.000000] Linux version 4.9.220-eisfair-64-VIRT (***@e64k49) (gcc
version 9.2.1 20200306 [revision
c5edde44f5b17b4891f17a63517f355bbf89e7d3] (eisfair Linux) ) #1 SMP Fri
Apr 24 20:31:28 CEST 2020
[ 0.000000] Command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a2bcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcb000-0x00000000a2bcbfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcc000-0x00000000a2bccfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcd000-0x00000000b67cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b67cb000-0x00000000b9b0dfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9b0e000-0x00000000b9b8afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9b8b000-0x00000000ba047fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba048000-0x00000000bacfefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bacff000-0x00000000bacfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad00000-0x00000000bf7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.1 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 3060/0NV0M7, BIOS 1.4.2 06/11/2019
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbad00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf50-0x000fcf5f] mapped
at [ffff88e8c00fcf50]
[ 0.000000] Base memory trampoline at [ffff88e8c008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1e9c26000, 0x1e9c26fff] PGTABLE
[ 0.000000] BRK [0x1e9c27000, 0x1e9c27fff] PGTABLE
[ 0.000000] BRK [0x1e9c28000, 0x1e9c28fff] PGTABLE
[ 0.000000] BRK [0x1e9c29000, 0x1e9c29fff] PGTABLE
[ 0.000000] BRK [0x1e9c2a000, 0x1e9c2afff] PGTABLE
[ 0.000000] BRK [0x1e9c2b000, 0x1e9c2bfff] PGTABLE
[ 0.000000] BRK [0x1e9c2c000, 0x1e9c2cfff] PGTABLE
[ 0.000000] BRK [0x1e9c2d000, 0x1e9c2dfff] PGTABLE
[ 0.000000] BRK [0x1e9c2e000, 0x1e9c2efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f755000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000B9B270A8 0000D4 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B9B68590 000114 (v06 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000B9B27210 04137E (v02 DELL CBX3
01072009 INTL 20160527)
[ 0.000000] ACPI: FACS 0x00000000BA046080 000040
[ 0.000000] ACPI: APIC 0x00000000B9B686A8 0000A0 (v04 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B9B68748 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000B9B68790 00009C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000B9B68830 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000B9B68870 0017D5 (v02 CpuRef CpuSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x00000000B9B6A048 000028 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6A070 0031C8 (v02 SaSsdt SaSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x00000000B9B6D238 000038 (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6D270 000E82 (v02 INTEL Ther_Rvp
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B6E0F8 0008D1 (v02 INTEL DELL_MFF
00000000 INTL 20160527)
[ 0.000000] ACPI: UEFI 0x00000000B9B6E9D0 000048 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: LPIT 0x00000000B9B6EA18 00005C (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6EA78 0027DE (v02 INTEL PtidDevc
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B71258 0014E2 (v02 INTEL TbtTypeC
00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x00000000B9B72740 000034 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: DBG2 0x00000000B9B72778 000054 (v00 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: MSDM 0x00000000B9B727D0 000055 (v03 DELL CBX3
06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000B9B72828 000176 (v03 DELL CBX3
01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B729A0 000144 (v02 Intel ADebTabl
00001000 INTL 20160527)
[ 0.000000] ACPI: DMAR 0x00000000B9B72AE8 0000A8 (v01 INTEL EDK2
00000002 01000013)
[ 0.000000] ACPI: TPM2 0x00000000B9B72B90 000034 (v04 DELL\x CBX3
00000001 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43e7fc000-0x43e7fffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a2bcafff]
[ 0.000000] node 0: [mem 0x00000000a2bcd000-0x00000000b67cafff]
[ 0.000000] node 0: [mem 0x00000000bacff000-0x00000000bacfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000043e7fffff]
[ 0.000000] On node 0 totalpages: 4149082
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11616 pages used for memmap
[ 0.000000] DMA32 zone: 743370 pages, LIFO batch:31
[ 0.000000] Normal zone: 53152 pages used for memmap
[ 0.000000] Normal zone: 3401728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6
nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu s94360 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s94360 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 4084229
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16245912K/16596328K available (6277K kernel code,
597K rwdata, 1724K rodata, 1116K init, 448K bss, 350416K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:1536 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2100.000 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
[ 0.000310] pid_max: default: 32768 minimum: 301
[ 0.000453] ACPI: Core revision 20160831
[ 0.048317] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.049329] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.052575] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.054070] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.054225] Mountpoint-cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.054626] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.054768] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.054915] mce: CPU supports 12 MCE banks
[ 0.055061] CPU0: Thermal monitoring enabled (TM1)
[ 0.055230] process: using mwait in idle threads
[ 0.055369] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.055507] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.055649] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.055900] Spectre V2 : Mitigation: Full generic retpoline
[ 0.056037] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.056181] Spectre V2 : Enabling Restricted Speculation for firmware
calls
[ 0.056329] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.056487] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.056712] TAA: Mitigation: Clear CPU buffers
[ 0.056849] MDS: Mitigation: Clear CPU buffers
[ 0.064888] Freeing SMP alternatives memory: 28K
[ 0.067292] smpboot: Max logical packages: 1
[ 0.068680] DMAR: Host address width 39
[ 0.068813] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.068958] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 19e2ff0505e
[ 0.069113] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.069254] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008c40660462 ecap f050da
[ 0.069399] DMAR: RMRR base: 0x000000ba5f3000 end: 0x000000ba83cfff
[ 0.069540] DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff
[ 0.069681] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.069821] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.073154] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.082744] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.122585] TSC deadline timer enabled
[ 0.122597] smpboot: CPU0: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz
(family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.123042] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[ 0.123657] ... version: 4
[ 0.123792] ... bit width: 48
[ 0.123928] ... generic registers: 8
[ 0.124064] ... value mask: 0000ffffffffffff
[ 0.124202] ... max period: 00007fffffffffff
[ 0.124341] ... fixed-purpose events: 3
[ 0.124474] ... event mask: 00000007000000ff
[ 0.124907] x86: Booting SMP configuration:
[ 0.125045] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.146621] x86: Booted up 1 node, 6 CPUs
[ 0.146837] smpboot: Total of 6 processors activated (25344.00 BogoMIPS)
[ 0.153100] devtmpfs: initialized
[ 0.153293] x86/mm: Memory block size: 128MB
[ 0.157789] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.158002] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.158180] xor: automatically using best checksumming function avx
[ 0.158416] NET: Registered protocol family 16
[ 0.184840] cpuidle: using governor ladder
[ 0.185051] Simple Boot Flag at 0x47 set to 0x80
[ 0.185212] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.185357] ACPI: bus type PCI registered
[ 0.185567] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.185767] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.185915] PCI: Using configuration type 1 for base access
[ 0.186068] dmi type 0xB1 record - unknown flag
[ 0.252861] raid6: sse2x1 gen() 7403 MB/s
[ 0.320883] raid6: sse2x1 xor() 5378 MB/s
[ 0.388905] raid6: sse2x2 gen() 9301 MB/s
[ 0.456923] raid6: sse2x2 xor() 6333 MB/s
[ 0.524949] raid6: sse2x4 gen() 10942 MB/s
[ 0.592968] raid6: sse2x4 xor() 6911 MB/s
[ 0.660993] raid6: avx2x1 gen() 14980 MB/s
[ 0.729013] raid6: avx2x2 gen() 18431 MB/s
[ 0.797037] raid6: avx2x4 gen() 21406 MB/s
[ 0.797176] raid6: using algorithm avx2x4 gen() 21406 MB/s
[ 0.797316] raid6: using avx2x2 recovery algorithm
[ 0.797488] ACPI: Added _OSI(Module Device)
[ 0.797625] ACPI: Added _OSI(Processor Device)
[ 0.797761] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.797898] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.804862] ACPI: Executed 33 blocks of module-level executable AML code
[ 0.821098] ACPI: Dynamic OEM Table Load:
[ 0.821392] ACPI: SSDT 0xFFFF88ECEB7FA000 00057C (v02 PmRef Cpu0Ist
00003000 INTL 20160527)
[ 0.822041] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.822468] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.824315] ACPI: Dynamic OEM Table Load:
[ 0.824609] ACPI: SSDT 0xFFFF88ECEB7F5800 000400 (v02 PmRef Cpu0Cst
00003001 INTL 20160527)
[ 0.825225] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.826171] ACPI: Dynamic OEM Table Load:
[ 0.826466] ACPI: SSDT 0xFFFF88ECEB002000 000EF1 (v02 PmRef ApIst
00003000 INTL 20160527)
[ 0.827734] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.828265] ACPI: Dynamic OEM Table Load:
[ 0.828557] ACPI: SSDT 0xFFFF88ECEB7F6400 00030A (v02 PmRef ApCst
00003000 INTL 20160527)
[ 0.829211] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.833201] ACPI: Interpreter enabled
[ 0.833349] ACPI: (supports S0 S5)
[ 0.833488] ACPI: Using IOAPIC for interrupt routing
[ 0.833678] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.848687] ACPI: Power Resource [USBC] (on)
[ 0.852848] ACPI: Power Resource [V0PR] (on)
[ 0.853511] ACPI: Power Resource [V1PR] (on)
[ 0.854158] ACPI: Power Resource [V2PR] (on)
[ 0.858376] ACPI: Power Resource [WRST] (on)
[ 0.861916] ACPI: Power Resource [FN00] (off)
[ 0.862151] ACPI: Power Resource [FN01] (off)
[ 0.862383] ACPI: Power Resource [FN02] (off)
[ 0.862614] ACPI: Power Resource [FN03] (off)
[ 0.862843] ACPI: Power Resource [FN04] (off)
[ 0.863836] ACPI: Power Resource [PIN] (off)
[ 0.864560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.864708] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.865055] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.865380] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.865524] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.866085] PCI host bridge to bus 0000:00
[ 0.866224] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.866367] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.866510] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.866655] pci_bus 0000:00: root bus resource [mem
0xbf800000-0xf7ffffff window]
[ 0.866800] pci_bus 0000:00: root bus resource [mem
0xfc800000-0xfe7fffff window]
[ 0.866944] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.867091] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.867539] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.867550] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.867557] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.867562] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.867777] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.867789] pci 0000:00:08.0: reg 0x10: [mem 0xd121e000-0xd121efff 64bit]
[ 0.868040] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.868078] pci 0000:00:12.0: reg 0x10: [mem 0xd121d000-0xd121dfff 64bit]
[ 0.868408] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.868449] pci 0000:00:14.0: reg 0x10: [mem 0xd1200000-0xd120ffff 64bit]
[ 0.868598] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.869083] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.869280] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.869315] pci 0000:00:14.2: reg 0x10: [mem 0xd1216000-0xd1217fff 64bit]
[ 0.869340] pci 0000:00:14.2: reg 0x18: [mem 0xd121c000-0xd121cfff 64bit]
[ 0.869607] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.869644] pci 0000:00:16.0: reg 0x10: [mem 0xd121b000-0xd121bfff 64bit]
[ 0.869772] pci 0000:00:16.0: PME# supported from D3hot
[ 0.870066] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
[ 0.870097] pci 0000:00:17.0: reg 0x10: [mem 0xd1214000-0xd1215fff]
[ 0.870114] pci 0000:00:17.0: reg 0x14: [mem 0xd121a000-0xd121a0ff]
[ 0.870129] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.870146] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.870161] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.870177] pci 0000:00:17.0: reg 0x24: [mem 0xd1219000-0xd12197ff]
[ 0.870268] pci 0000:00:17.0: PME# supported from D3hot
[ 0.870549] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[ 0.870729] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.870777] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.871083] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.871357] pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100
[ 0.871774] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.871847] pci 0000:00:1f.3: reg 0x10: [mem 0xd1210000-0xd1213fff 64bit]
[ 0.871946] pci 0000:00:1f.3: reg 0x20: [mem 0xd1000000-0xd10fffff 64bit]
[ 0.872107] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.872968] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.873188] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.873338] pci 0000:00:1f.4: reg 0x10: [mem 0xd1218000-0xd12180ff 64bit]
[ 0.873555] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.873955] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.873976] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.874293] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.874321] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.874362] pci 0000:01:00.0: reg 0x18: [mem 0xd1104000-0xd1104fff 64bit]
[ 0.874387] pci 0000:01:00.0: reg 0x20: [mem 0xd1100000-0xd1103fff 64bit]
[ 0.874526] pci 0000:01:00.0: supports D1 D2
[ 0.874527] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.874609] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.885143] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.885284] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.885290] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.886810] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.887126] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.887436] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.887746] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.888057] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.888368] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.888678] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.888988] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.889881] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.890312] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.890455] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.890604] vgaarb: loaded
[ 0.890738] vgaarb: bridge control possible 0000:00:02.0
[ 0.890978] PCI: Using ACPI for IRQ routing
[ 0.912284] PCI: pci_cache_line_size set to 64 bytes
[ 0.912375] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.912376] e820: reserve RAM buffer [mem 0xa2bcb000-0xa3ffffff]
[ 0.912377] e820: reserve RAM buffer [mem 0xb67cb000-0xb7ffffff]
[ 0.912377] e820: reserve RAM buffer [mem 0xbad00000-0xbbffffff]
[ 0.912378] e820: reserve RAM buffer [mem 0x43e800000-0x43fffffff]
[ 0.912687] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.913523] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.915764] clocksource: Switched to clocksource hpet
[ 0.915934] VFS: Disk quotas dquot_6.6.0
[ 0.916084] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.916269] pnp: PnP ACPI init
[ 0.916744] system 00:00: [io 0x0a00-0x0a3f] has been reserved
[ 0.916907] system 00:00: [io 0x0a40-0x0a7f] has been reserved
[ 0.917066] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.918156] pnp 00:01: [dma 0 disabled]
[ 0.918203] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.918388] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.918550] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.918691] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.918711] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.918820] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.918982] system 00:04: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.919121] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.919286] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.919429] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.919572] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.919715] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.919940] system 00:05: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.920083] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.920226] system 00:05: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.920370] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.920643] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.920808] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.920950] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.921092] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.921235] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be
reserved
[ 0.921379] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.921522] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.921665] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.922026] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.922189] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.923559] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.923725] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.923942] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.924085] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.924229] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.925069] pnp: PnP ACPI: found 9 devices
[ 0.931106] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.931325] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.931466] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.931614] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.931815] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.931817] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.931818] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.931820] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xf7ffffff
window]
[ 0.931821] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff
window]
[ 0.931822] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.931823] pci_bus 0000:01: resource 1 [mem 0xd1100000-0xd11fffff]
[ 0.931993] NET: Registered protocol family 2
[ 0.932302] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.932619] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.932870] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.933040] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.933225] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.933432] NET: Registered protocol family 1
[ 0.933582] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.934086] PCI: CLS 64 bytes, default 64
[ 0.934117] Trying to unpack rootfs image as initramfs...
[ 1.106290] Freeing initrd memory: 8876K
[ 1.106470] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.106615] software IO TLB: mapped [mem 0xb27cb000-0xb67cb000] (64MB)
[ 1.107269] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.109615] SGI XFS with ACLs, security attributes, realtime, no
debug enabled
[ 1.111687] async_tx: api initialized (async)
[ 1.111938] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 1.112151] io scheduler noop registered
[ 1.112294] io scheduler deadline registered (default)
[ 1.112462] io scheduler cfq registered
[ 1.113146] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 1.113201] vga16fb: initializing
[ 1.113202] vga16fb: mapped to 0xffff88e8c00a0000
[ 1.238032] Console: switching to colour frame buffer device 80x30
[ 2.123830] tsc: Refined TSC clocksource calibration: 2112.000 MHz
[ 2.123844] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1e71785e5dd, max_idle_ns: 440795244814 ns
[ 2.404784] fb0: VGA16 VGA frame buffer device
[ 2.420187] intel_idle: MWAIT substates: 0x11142120
[ 2.420188] intel_idle: v0.4.1 model 0x9E
[ 2.420469] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.420613] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.435925] ACPI: Sleep Button [SLPB]
[ 2.450845] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.466028] ACPI: Power Button [PWRB]
[ 2.481009] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.495903] ACPI: Power Button [PWRF]
[ 2.511246] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.525409] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.539099] GHES: HEST is not enabled!
[ 2.552747] xenfs: not registering filesystem on non-xen platform
[ 2.576992] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.612010] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 2.631057] brd: module loaded
[ 2.645085] tun: Universal TUN/TAP device driver, 1.6
[ 2.659100] tun: (C) 1999-2004 Max Krasnyansky <***@qualcomm.com>
[ 2.672820] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.689331] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.702778] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.716164] hv_vmbus: registering driver hyperv_keyboard
[ 2.729841] mousedev: PS/2 mouse device common for all mice
[ 2.743190] rtc_cmos 00:03: RTC can wake from S4
[ 2.757231] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.770853] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 2.784013] md: linear personality registered for level -1
[ 2.797446] md: raid0 personality registered for level 0
[ 2.810513] md: raid1 personality registered for level 1
[ 2.823239] md: raid10 personality registered for level 10
[ 2.835981] md: raid6 personality registered for level 6
[ 2.848273] md: raid5 personality registered for level 5
[ 2.860269] md: raid4 personality registered for level 4
[ 2.872087] md: multipath personality registered for level -4
[ 2.884083] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-***@redhat.com
[ 2.896355] intel_pstate: Intel P-state driver initializing
[ 2.908996] intel_pstate: HWP enabled
[ 2.919869] Initializing XFRM netlink socket
[ 2.930786] NET: Registered protocol family 17
[ 2.941401] NET: Registered protocol family 15
[ 2.950939] Key type dns_resolver registered
[ 2.960472] microcode: sig=0x906ea, pf=0x2, revision=0xca
[ 2.969965] microcode: Microcode Update Driver: v2.01
<***@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.989449] registered taskstats version 1
[ 3.000979] rtc_cmos 00:03: setting system clock to 2020-06-19
03:50:57 UTC (1592538657)
[ 3.144462] clocksource: Switched to clocksource tsc
[ 5.864172] floppy0: no floppy controllers found
[ 6.047551] Freeing unused kernel memory: 1116K
[ 6.058192] Write protecting the kernel read-only data: 10240k
[ 6.069942] Freeing unused kernel memory: 1900K
[ 6.080812] Freeing unused kernel memory: 324K
[ 6.158788] udevd[1483]: starting version 3.2.8
[ 6.169365] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.179821] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.189941] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.200631] udevd[1484]: starting eudev-3.2.8
[ 6.265015] SCSI subsystem initialized
[ 6.266081] libata version 3.00 loaded.
[ 6.266525] ahci 0000:00:17.0: version 3.0
[ 6.266729] ahci 0000:00:17.0: controller can't do SNTF, turning off
CAP_SNTF
[ 6.266882] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps
0x3 impl RAID mode
[ 6.266884] ahci 0000:00:17.0: flags: 64bit ncq pm clo only pio slum
part ems deso sadm sds apst
[ 6.272173] ACPI: bus type USB registered
[ 6.272185] usbcore: registered new interface driver usbfs
[ 6.272191] usbcore: registered new interface driver hub
[ 6.272204] usbcore: registered new device driver usb
[ 6.276650] scsi host0: ahci
[ 6.276759] scsi host1: ahci
[ 6.276878] scsi host2: ahci
[ 6.277122] scsi host3: ahci
[ 6.277344] scsi host4: ahci
[ 6.277536] scsi host5: ahci
[ 6.277635] ata1: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219100 irq 123
[ 6.277640] ata2: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219180 irq 123
[ 6.277640] ata3: DUMMY
[ 6.277640] ata4: DUMMY
[ 6.277641] ata5: DUMMY
[ 6.277641] ata6: DUMMY
[ 6.277890] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.277893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 6.279172] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x110 quirks 0x00009810
[ 6.279179] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.279329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.279330] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.279331] usb usb1: Product: xHCI Host Controller
[ 6.279331] usb usb1: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.279332] usb usb1: SerialNumber: 0000:00:14.0
[ 6.279411] hub 1-0:1.0: USB hub found
[ 6.279447] hub 1-0:1.0: 16 ports detected
[ 6.280579] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.280581] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 6.280582] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced
SuperSpeed
[ 6.280610] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.280611] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.280612] usb usb2: Product: xHCI Host Controller
[ 6.280612] usb usb2: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.280613] usb usb2: SerialNumber: 0000:00:14.0
[ 6.280744] hub 2-0:1.0: USB hub found
[ 6.280767] hub 2-0:1.0: 8 ports detected
[ 6.281130] usb: port power management may be unreliable
[ 6.590737] ata1: SATA link down (SStatus 4 SControl 300)
[ 6.590774] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.607822] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 6.629164] ata2.00: ATA-9: SAMSUNG SSD PM871b M.2 2280 256GB,
MVT23D0Q, max UDMA/133
[ 6.629165] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 6.702409] ata2.00: configured for UDMA/133
[ 6.702586] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM87
3D0Q PQ: 0 ANSI: 5
[ 6.791995] usb 1-4: New USB device found, idVendor=059b, idProduct=0475
[ 6.791996] usb 1-4: New USB device strings: Mfr=10, Product=11,
SerialNumber=5
[ 6.791996] usb 1-4: Product: USB to ATA/ATAPI bridge
[ 6.791997] usb 1-4: Manufacturer: Iomega
[ 6.791997] usb 1-4: SerialNumber: 974CFFFFFFFF
[ 6.793435] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 6.793837] scsi host6: usb-storage 1-4:1.0
[ 6.793917] usbcore: registered new interface driver usb-storage
[ 6.801650] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 6.801672] sd 1:0:0:0: [sda] Write Protect is off
[ 6.801673] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.801694] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.803362] sda: sda1
[ 6.803510] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.816760] scsi 6:0:0:0: Direct-Access ST310005 28AS
PQ: 0 ANSI: 2 CCS
[ 7.834567] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 7.850873] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.866638] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 7.867136] sd 6:0:0:0: [sdb] No Caching mode page found
[ 7.882425] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.903003] sdb: sdb1 sdb2 sdb3 sdb4
[ 7.918542] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.939510] random: fast init done
[ 9.223680] EXT4-fs (sdb3): couldn't mount as ext3 due to feature
incompatibilities
[ 9.247021] EXT4-fs (sdb3): INFO: recovery required on readonly
filesystem
[ 9.262106] EXT4-fs (sdb3): write access will be enabled during recovery
[ 9.889785] EXT4-fs (sdb3): orphan cleanup on readonly fs
[ 9.904648] EXT4-fs (sdb3): 3 orphan inodes deleted
[ 9.919129] EXT4-fs (sdb3): recovery complete
[ 9.938405] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.709556] random: crng init done
[ 12.723488] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.446865] udevd[1622]: starting version 3.2.9
[ 13.678793] udevd[1623]: starting eudev-3.2.9
[ 14.020105] wmi: Mapper loaded
[ 14.255954] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.311998] Error: Driver 'pcspkr' is already registered, aborting...
[ 14.312337] usbcore: registered new interface driver uas
[ 14.408157] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded
[ 14.434144] r8168: This product is covered by one or more of the
following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 14.448372] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 14.448374] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 14.448374] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 14.448375] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.448375] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.448376] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 14.448377] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 14.467965] AVX2 version of gcm_enc/dec engaged.
[ 14.467966] AES CTR mode by8 optimization enabled
[ 14.572542] r8168 Copyright (C) 2018 Realtek NIC software team
<***@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for
details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to
redistribute it under certain conditions; see
<http://www.gnu.org/licenses/>.
[ 15.069118] r8168 0000:01:00.0 enxb88584a58e8a: renamed from eth0
[ 27.607013] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 27.621432] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 27.624405] input: HDA Intel Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 27.624511] input: HDA Intel Front Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 27.624589] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 27.797257] Adding 1048572k swap on /dev/sdb2. Priority:-1 extents:1
across:1048572k FS
[ 27.842879] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 28.229484] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 28.400470] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 28.567241] EXT4-fs (sdb4): mounted filesystem with ordered data
mode. Opts: (null)
[ 28.720979] EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro,acl,user_xattr
[ 28.734878] EXT4-fs (sdb4): re-mounted. Opts: acl,user_xattr
[ 30.100934] usbcore: registered new interface driver usblp
[ 30.184021] enxb88584a58e8a: 0xffff9d8381ae5000, b8:85:84:a5:8e:8a,
IRQ 126
[ 31.917619] NET: Registered protocol family 10
[ 31.918461] IPv6: ADDRCONF(NETDEV_UP): enxb88584a58e8a: link is not ready
[ 33.337178] r8168: enxb88584a58e8a: link up
[ 33.337193] IPv6: ADDRCONF(NETDEV_CHANGE): enxb88584a58e8a: link
becomes ready
[ 871.014880] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)



Das ist die Ausgabe.
Danke!
Gruß Daniel
Daniel Kubein
2020-08-05 03:25:19 UTC
Permalink
Hallo Marcus,
Bitte ändere in /etc/init.d/mountfs die Zeile 94 von
/bin/mount -av 2>/dev/null
in
/bin/mount -av # 2>/dev/null
ab und schick mir den dmesg-Output nochmal nach Reboot zu.
Und jetzt nochmal dmesg nach der Anpassung in automount
und dem gewünschten Neustart des Systems:



Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb3 ext4 153G 16G 130G 11% /
tmpfs tmpfs 7.8G 508K 7.8G 1% /run
devtmpfs devtmpfs 7.8G 0 7.8G 0% /dev
/dev/sdb1 ext4 89M 41M 42M 50% /boot
/dev/sdb4 ext4 762G 73M 723G 1% /data
tmpfs tmpfs 7.8G 0 7.8G 0% /run/shm




eis 2.8.25 # dmesg
[ 0.000000] microcode: microcode updated early to revision 0xca, date
= 2019-10-03
[ 0.000000] Linux version 4.9.220-eisfair-64-VIRT (***@e64k49) (gcc
version 9.2.1 20200306 [revision
c5edde44f5b17b4891f17a63517f355bbf89e7d3] (eisfair Linux) ) #1 SMP Fri
Apr 24 20:31:28 CEST 2020
[ 0.000000] Command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a2bcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcb000-0x00000000a2bcbfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcc000-0x00000000a2bccfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcd000-0x00000000b67cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b67cb000-0x00000000b9b0dfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9b0e000-0x00000000b9b8afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9b8b000-0x00000000ba047fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba048000-0x00000000bacfefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bacff000-0x00000000bacfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad00000-0x00000000bf7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.1 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 3060/0NV0M7, BIOS 1.4.2 06/11/2019
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbad00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf50-0x000fcf5f] mapped
at [ffff93a3800fcf50]
[ 0.000000] Base memory trampoline at [ffff93a38008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x24c26000, 0x24c26fff] PGTABLE
[ 0.000000] BRK [0x24c27000, 0x24c27fff] PGTABLE
[ 0.000000] BRK [0x24c28000, 0x24c28fff] PGTABLE
[ 0.000000] BRK [0x24c29000, 0x24c29fff] PGTABLE
[ 0.000000] BRK [0x24c2a000, 0x24c2afff] PGTABLE
[ 0.000000] BRK [0x24c2b000, 0x24c2bfff] PGTABLE
[ 0.000000] BRK [0x24c2c000, 0x24c2cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f755000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000B9B270A8 0000D4 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B9B68590 000114 (v06 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000B9B27210 04137E (v02 DELL CBX3
01072009 INTL 20160527)
[ 0.000000] ACPI: FACS 0x00000000BA046080 000040
[ 0.000000] ACPI: APIC 0x00000000B9B686A8 0000A0 (v04 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B9B68748 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000B9B68790 00009C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000B9B68830 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000B9B68870 0017D5 (v02 CpuRef CpuSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x00000000B9B6A048 000028 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6A070 0031C8 (v02 SaSsdt SaSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x00000000B9B6D238 000038 (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6D270 000E82 (v02 INTEL Ther_Rvp
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B6E0F8 0008D1 (v02 INTEL DELL_MFF
00000000 INTL 20160527)
[ 0.000000] ACPI: UEFI 0x00000000B9B6E9D0 000048 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: LPIT 0x00000000B9B6EA18 00005C (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6EA78 0027DE (v02 INTEL PtidDevc
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B71258 0014E2 (v02 INTEL TbtTypeC
00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x00000000B9B72740 000034 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: DBG2 0x00000000B9B72778 000054 (v00 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: MSDM 0x00000000B9B727D0 000055 (v03 DELL CBX3
06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000B9B72828 000176 (v03 DELL CBX3
01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B729A0 000144 (v02 Intel ADebTabl
00001000 INTL 20160527)
[ 0.000000] ACPI: DMAR 0x00000000B9B72AE8 0000A8 (v01 INTEL EDK2
00000002 01000013)
[ 0.000000] ACPI: TPM2 0x00000000B9B72B90 000034 (v04 DELL\x CBX3
00000001 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43e7fa000-0x43e7fdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a2bcafff]
[ 0.000000] node 0: [mem 0x00000000a2bcd000-0x00000000b67cafff]
[ 0.000000] node 0: [mem 0x00000000bacff000-0x00000000bacfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000043e7fffff]
[ 0.000000] On node 0 totalpages: 4149082
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11616 pages used for memmap
[ 0.000000] DMA32 zone: 743370 pages, LIFO batch:31
[ 0.000000] Normal zone: 53152 pages used for memmap
[ 0.000000] Normal zone: 3401728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6
nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu s94360 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s94360 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 4084229
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16245904K/16596328K available (6277K kernel code,
597K rwdata, 1724K rodata, 1116K init, 448K bss, 350424K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:1536 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2100.000 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
[ 0.000313] pid_max: default: 32768 minimum: 301
[ 0.000456] ACPI: Core revision 20160831
[ 0.047525] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.048595] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.051780] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.053333] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.053488] Mountpoint-cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.053889] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.054030] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.054176] mce: CPU supports 12 MCE banks
[ 0.054320] CPU0: Thermal monitoring enabled (TM1)
[ 0.054489] process: using mwait in idle threads
[ 0.054628] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.054767] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.054907] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.055104] Spectre V2 : Mitigation: Full generic retpoline
[ 0.055240] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.055383] Spectre V2 : Enabling Restricted Speculation for firmware
calls
[ 0.055531] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.055689] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.055970] TAA: Mitigation: Clear CPU buffers
[ 0.056106] MDS: Mitigation: Clear CPU buffers
[ 0.056687] Freeing SMP alternatives memory: 28K
[ 0.059096] smpboot: Max logical packages: 1
[ 0.060484] DMAR: Host address width 39
[ 0.060618] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.060762] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 19e2ff0505e
[ 0.060917] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061057] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008c40660462 ecap f050da
[ 0.061203] DMAR: RMRR base: 0x000000ba5f3000 end: 0x000000ba83cfff
[ 0.061345] DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff
[ 0.061486] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061625] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.064950] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.074541] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.114383] TSC deadline timer enabled
[ 0.114395] smpboot: CPU0: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz
(family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.114842] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[ 0.115457] ... version: 4
[ 0.115593] ... bit width: 48
[ 0.115728] ... generic registers: 8
[ 0.115864] ... value mask: 0000ffffffffffff
[ 0.116002] ... max period: 00007fffffffffff
[ 0.116140] ... fixed-purpose events: 3
[ 0.116275] ... event mask: 00000007000000ff
[ 0.116711] x86: Booting SMP configuration:
[ 0.116848] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.138423] x86: Booted up 1 node, 6 CPUs
[ 0.138638] smpboot: Total of 6 processors activated (25344.00 BogoMIPS)
[ 0.144902] devtmpfs: initialized
[ 0.145095] x86/mm: Memory block size: 128MB
[ 0.149590] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.149803] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149979] xor: automatically using best checksumming function avx
[ 0.150216] NET: Registered protocol family 16
[ 0.164632] cpuidle: using governor ladder
[ 0.164843] Simple Boot Flag at 0x47 set to 0x80
[ 0.165005] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.165149] ACPI: bus type PCI registered
[ 0.165361] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165562] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165712] PCI: Using configuration type 1 for base access
[ 0.165865] dmi type 0xB1 record - unknown flag
[ 0.232648] raid6: sse2x1 gen() 7401 MB/s
[ 0.300674] raid6: sse2x1 xor() 5379 MB/s
[ 0.368693] raid6: sse2x2 gen() 9299 MB/s
[ 0.436721] raid6: sse2x2 xor() 6334 MB/s
[ 0.504742] raid6: sse2x4 gen() 10939 MB/s
[ 0.572764] raid6: sse2x4 xor() 6876 MB/s
[ 0.640788] raid6: avx2x1 gen() 14995 MB/s
[ 0.708811] raid6: avx2x2 gen() 18421 MB/s
[ 0.776834] raid6: avx2x4 gen() 21371 MB/s
[ 0.776973] raid6: using algorithm avx2x4 gen() 21371 MB/s
[ 0.777112] raid6: using avx2x2 recovery algorithm
[ 0.777284] ACPI: Added _OSI(Module Device)
[ 0.777422] ACPI: Added _OSI(Processor Device)
[ 0.777558] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.777694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.784614] ACPI: Executed 33 blocks of module-level executable AML code
[ 0.800814] ACPI: Dynamic OEM Table Load:
[ 0.801110] ACPI: SSDT 0xFFFF93A7AB089800 00057C (v02 PmRef Cpu0Ist
00003000 INTL 20160527)
[ 0.801762] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.802187] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.804026] ACPI: Dynamic OEM Table Load:
[ 0.804320] ACPI: SSDT 0xFFFF93A7AB081400 000400 (v02 PmRef Cpu0Cst
00003001 INTL 20160527)
[ 0.804928] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.805867] ACPI: Dynamic OEM Table Load:
[ 0.806162] ACPI: SSDT 0xFFFF93A7AB50A000 000EF1 (v02 PmRef ApIst
00003000 INTL 20160527)
[ 0.807418] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.807944] ACPI: Dynamic OEM Table Load:
[ 0.808237] ACPI: SSDT 0xFFFF93A7AB081800 00030A (v02 PmRef ApCst
00003000 INTL 20160527)
[ 0.808885] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.812852] ACPI: Interpreter enabled
[ 0.812999] ACPI: (supports S0 S5)
[ 0.813139] ACPI: Using IOAPIC for interrupt routing
[ 0.813327] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.828234] ACPI: Power Resource [USBC] (on)
[ 0.832382] ACPI: Power Resource [V0PR] (on)
[ 0.833045] ACPI: Power Resource [V1PR] (on)
[ 0.833685] ACPI: Power Resource [V2PR] (on)
[ 0.837877] ACPI: Power Resource [WRST] (on)
[ 0.841392] ACPI: Power Resource [FN00] (off)
[ 0.841626] ACPI: Power Resource [FN01] (off)
[ 0.841857] ACPI: Power Resource [FN02] (off)
[ 0.842086] ACPI: Power Resource [FN03] (off)
[ 0.842317] ACPI: Power Resource [FN04] (off)
[ 0.843308] ACPI: Power Resource [PIN] (off)
[ 0.844030] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.844178] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.844520] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.844848] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.844993] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.845553] PCI host bridge to bus 0000:00
[ 0.845693] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.845836] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.845979] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.846124] pci_bus 0000:00: root bus resource [mem
0xbf800000-0xf7ffffff window]
[ 0.846267] pci_bus 0000:00: root bus resource [mem
0xfc800000-0xfe7fffff window]
[ 0.846413] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.846560] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.847004] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.847015] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.847022] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.847027] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.847240] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.847252] pci 0000:00:08.0: reg 0x10: [mem 0xd121e000-0xd121efff 64bit]
[ 0.847503] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.847541] pci 0000:00:12.0: reg 0x10: [mem 0xd121d000-0xd121dfff 64bit]
[ 0.847876] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.847916] pci 0000:00:14.0: reg 0x10: [mem 0xd1200000-0xd120ffff 64bit]
[ 0.848065] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.848542] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.848741] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.848775] pci 0000:00:14.2: reg 0x10: [mem 0xd1216000-0xd1217fff 64bit]
[ 0.848800] pci 0000:00:14.2: reg 0x18: [mem 0xd121c000-0xd121cfff 64bit]
[ 0.849070] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.849106] pci 0000:00:16.0: reg 0x10: [mem 0xd121b000-0xd121bfff 64bit]
[ 0.849234] pci 0000:00:16.0: PME# supported from D3hot
[ 0.849529] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
[ 0.849561] pci 0000:00:17.0: reg 0x10: [mem 0xd1214000-0xd1215fff]
[ 0.849577] pci 0000:00:17.0: reg 0x14: [mem 0xd121a000-0xd121a0ff]
[ 0.849594] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.849610] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.849626] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.849642] pci 0000:00:17.0: reg 0x24: [mem 0xd1219000-0xd12197ff]
[ 0.849732] pci 0000:00:17.0: PME# supported from D3hot
[ 0.850013] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[ 0.850193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.850240] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.850546] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.850819] pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100
[ 0.851238] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.851311] pci 0000:00:1f.3: reg 0x10: [mem 0xd1210000-0xd1213fff 64bit]
[ 0.851411] pci 0000:00:1f.3: reg 0x20: [mem 0xd1000000-0xd10fffff 64bit]
[ 0.851573] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.852424] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.852628] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.852771] pci 0000:00:1f.4: reg 0x10: [mem 0xd1218000-0xd12180ff 64bit]
[ 0.852985] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.853377] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.853399] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.853718] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.853745] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.853785] pci 0000:01:00.0: reg 0x18: [mem 0xd1104000-0xd1104fff 64bit]
[ 0.853811] pci 0000:01:00.0: reg 0x20: [mem 0xd1100000-0xd1103fff 64bit]
[ 0.853948] pci 0000:01:00.0: supports D1 D2
[ 0.853949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854031] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.868898] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.869040] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.869046] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.870550] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.870856] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871175] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871486] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871797] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872107] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872418] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872728] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.873621] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.874051] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.874193] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.874342] vgaarb: loaded
[ 0.874475] vgaarb: bridge control possible 0000:00:02.0
[ 0.874715] PCI: Using ACPI for IRQ routing
[ 0.896016] PCI: pci_cache_line_size set to 64 bytes
[ 0.896109] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.896110] e820: reserve RAM buffer [mem 0xa2bcb000-0xa3ffffff]
[ 0.896111] e820: reserve RAM buffer [mem 0xb67cb000-0xb7ffffff]
[ 0.896111] e820: reserve RAM buffer [mem 0xbad00000-0xbbffffff]
[ 0.896112] e820: reserve RAM buffer [mem 0x43e800000-0x43fffffff]
[ 0.896410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.897248] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.899473] clocksource: Switched to clocksource hpet
[ 0.899644] VFS: Disk quotas dquot_6.6.0
[ 0.899793] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.899975] pnp: PnP ACPI init
[ 0.900413] system 00:00: [io 0x0a00-0x0a3f] has been reserved
[ 0.900576] system 00:00: [io 0x0a40-0x0a7f] has been reserved
[ 0.900717] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.901782] pnp 00:01: [dma 0 disabled]
[ 0.901828] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.902015] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.902177] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.902319] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.902340] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.902446] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.902610] system 00:04: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.902750] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.902913] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.903056] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.903200] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.903343] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.903545] system 00:05: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.903688] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.903830] system 00:05: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.903973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.904245] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.904408] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.904551] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.904693] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.904837] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be
reserved
[ 0.904980] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.905122] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.905265] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.905624] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.905787] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.907140] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.907305] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.907448] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.907658] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.907800] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.908627] pnp: PnP ACPI: found 9 devices
[ 0.914637] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.914855] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.914996] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.915144] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.915302] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.915303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.915304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.915306] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xf7ffffff
window]
[ 0.915307] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff
window]
[ 0.915308] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.915309] pci_bus 0000:01: resource 1 [mem 0xd1100000-0xd11fffff]
[ 0.915521] NET: Registered protocol family 2
[ 0.915826] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.916140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.916390] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.916558] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.916743] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.916945] NET: Registered protocol family 1
[ 0.917096] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.917596] PCI: CLS 64 bytes, default 64
[ 0.917628] Trying to unpack rootfs image as initramfs...
[ 1.089701] Freeing initrd memory: 8876K
[ 1.089876] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.090022] software IO TLB: mapped [mem 0xb27cb000-0xb67cb000] (64MB)
[ 1.090667] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.093004] SGI XFS with ACLs, security attributes, realtime, no
debug enabled
[ 1.095071] async_tx: api initialized (async)
[ 1.095244] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 1.095457] io scheduler noop registered
[ 1.095669] io scheduler deadline registered (default)
[ 1.095837] io scheduler cfq registered
[ 1.096516] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 1.096604] vga16fb: initializing
[ 1.096606] vga16fb: mapped to 0xffff93a3800a0000
[ 1.221326] Console: switching to colour frame buffer device 80x30
[ 2.119541] tsc: Refined TSC clocksource calibration: 2112.006 MHz
[ 2.119555] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1e717e40680, max_idle_ns: 440795297614 ns
[ 2.385605] fb0: VGA16 VGA frame buffer device
[ 2.401075] intel_idle: MWAIT substates: 0x11142120
[ 2.401075] intel_idle: v0.4.1 model 0x9E
[ 2.401358] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.401504] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.416865] ACPI: Sleep Button [SLPB]
[ 2.431892] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.447076] ACPI: Power Button [PWRB]
[ 2.462106] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.477097] ACPI: Power Button [PWRF]
[ 2.492585] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.506808] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.520633] GHES: HEST is not enabled!
[ 2.534239] xenfs: not registering filesystem on non-xen platform
[ 2.558067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.593038] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 2.612562] brd: module loaded
[ 2.626564] tun: Universal TUN/TAP device driver, 1.6
[ 2.640653] tun: (C) 1999-2004 Max Krasnyansky <***@qualcomm.com>
[ 2.654393] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.670733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.684137] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.697403] hv_vmbus: registering driver hyperv_keyboard
[ 2.710963] mousedev: PS/2 mouse device common for all mice
[ 2.724313] rtc_cmos 00:03: RTC can wake from S4
[ 2.738334] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.751981] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 2.765100] md: linear personality registered for level -1
[ 2.778513] md: raid0 personality registered for level 0
[ 2.791546] md: raid1 personality registered for level 1
[ 2.804240] md: raid10 personality registered for level 10
[ 2.816913] md: raid6 personality registered for level 6
[ 2.829208] md: raid5 personality registered for level 5
[ 2.841204] md: raid4 personality registered for level 4
[ 2.852974] md: multipath personality registered for level -4
[ 2.864972] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-***@redhat.com
[ 2.877236] intel_pstate: Intel P-state driver initializing
[ 2.889884] intel_pstate: HWP enabled
[ 2.900842] Initializing XFRM netlink socket
[ 2.911838] NET: Registered protocol family 17
[ 2.922344] NET: Registered protocol family 15
[ 2.932003] Key type dns_resolver registered
[ 2.941456] microcode: sig=0x906ea, pf=0x2, revision=0xca
[ 2.950824] microcode: Microcode Update Driver: v2.01
<***@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.970265] registered taskstats version 1
[ 2.981848] rtc_cmos 00:03: setting system clock to 2020-08-05
03:21:13 UTC (1596597673)
[ 3.144153] clocksource: Switched to clocksource tsc
[ 5.863909] floppy0: no floppy controllers found
[ 5.877763] Freeing unused kernel memory: 1116K
[ 5.888426] Write protecting the kernel read-only data: 10240k
[ 5.899454] Freeing unused kernel memory: 1900K
[ 5.910232] Freeing unused kernel memory: 324K
[ 5.988218] udevd[1482]: starting version 3.2.8
[ 5.998716] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.009192] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.019283] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.029961] udevd[1483]: starting eudev-3.2.8
[ 6.093910] ACPI: bus type USB registered
[ 6.093942] usbcore: registered new interface driver usbfs
[ 6.093944] SCSI subsystem initialized
[ 6.093947] usbcore: registered new interface driver hub
[ 6.093980] usbcore: registered new device driver usb
[ 6.094757] libata version 3.00 loaded.
[ 6.094950] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.094952] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 6.096288] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x110 quirks 0x00009810
[ 6.096300] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.096445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.096446] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.096446] usb usb1: Product: xHCI Host Controller
[ 6.096447] usb usb1: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.096448] usb usb1: SerialNumber: 0000:00:14.0
[ 6.096567] hub 1-0:1.0: USB hub found
[ 6.096605] hub 1-0:1.0: 16 ports detected
[ 6.097476] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.097478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 6.097479] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced
SuperSpeed
[ 6.097508] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.097509] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.097509] usb usb2: Product: xHCI Host Controller
[ 6.097510] usb usb2: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.097511] usb usb2: SerialNumber: 0000:00:14.0
[ 6.097626] hub 2-0:1.0: USB hub found
[ 6.097650] hub 2-0:1.0: 8 ports detected
[ 6.097947] usb: port power management may be unreliable
[ 6.098179] ahci 0000:00:17.0: version 3.0
[ 6.098322] ahci 0000:00:17.0: controller can't do SNTF, turning off
CAP_SNTF
[ 6.098460] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps
0x3 impl RAID mode
[ 6.098462] ahci 0000:00:17.0: flags: 64bit ncq pm clo only pio slum
part ems deso sadm sds apst
[ 6.107954] scsi host0: ahci
[ 6.108053] scsi host1: ahci
[ 6.108196] scsi host2: ahci
[ 6.108265] scsi host3: ahci
[ 6.108463] scsi host4: ahci
[ 6.108631] scsi host5: ahci
[ 6.108685] ata1: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219100 irq 124
[ 6.108689] ata2: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219180 irq 124
[ 6.108690] ata3: DUMMY
[ 6.108690] ata4: DUMMY
[ 6.108690] ata5: DUMMY
[ 6.108691] ata6: DUMMY
[ 6.422484] ata1: SATA link down (SStatus 4 SControl 300)
[ 6.422647] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.423539] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 6.474068] ata2.00: ATA-9: SAMSUNG SSD PM871b M.2 2280 256GB,
MVT23D0Q, max UDMA/133
[ 6.474069] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 6.553535] ata2.00: configured for UDMA/133
[ 6.553712] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM87
3D0Q PQ: 0 ANSI: 5
[ 6.619475] usb 1-4: New USB device found, idVendor=059b, idProduct=0475
[ 6.619476] usb 1-4: New USB device strings: Mfr=10, Product=11,
SerialNumber=5
[ 6.619477] usb 1-4: Product: USB to ATA/ATAPI bridge
[ 6.619478] usb 1-4: Manufacturer: Iomega
[ 6.619478] usb 1-4: SerialNumber: 974CFFFFFFFF
[ 6.620905] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 6.621300] scsi host6: usb-storage 1-4:1.0
[ 6.621379] usbcore: registered new interface driver usb-storage
[ 6.693401] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 6.693427] sd 1:0:0:0: [sda] Write Protect is off
[ 6.693428] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.693431] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.704435] sda: sda1
[ 6.704585] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.624589] scsi 6:0:0:0: Direct-Access ST310005 28AS
PQ: 0 ANSI: 2 CCS
[ 7.642622] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 7.658874] random: fast init done
[ 7.674985] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.690980] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 7.691429] sd 6:0:0:0: [sdb] No Caching mode page found
[ 7.706738] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.727032] sdb: sdb1 sdb2 sdb3 sdb4
[ 7.742702] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 9.050038] EXT4-fs (sdb3): couldn't mount as ext3 due to feature
incompatibilities
[ 9.092828] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.727283] udevd[1621]: starting version 3.2.9
[ 12.941207] udevd[1622]: starting eudev-3.2.9
[ 13.217051] wmi: Mapper loaded
[ 13.374638] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.403627] udevd[1634]: could not read from
'/sys/module/pcc_cpufreq/initstate': No such device
[ 13.403819] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.488115] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 13.511114] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 13.523170] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 13.534567] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.545775] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.556260] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 13.566588] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 13.584182] usbcore: registered new interface driver uas
[ 13.825370] random: crng init done
[ 13.836090] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.859951] AVX2 version of gcm_enc/dec engaged.
[ 13.859990] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded
[ 13.875044] r8168: This product is covered by one or more of the
following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 13.875046] r8168 Copyright (C) 2018 Realtek NIC software team
<***@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for
details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to
redistribute it under certain conditions; see
<http://www.gnu.org/licenses/>.
[ 13.976129] AES CTR mode by8 optimization enabled
[ 14.306365] r8168 0000:01:00.0 enxb88584a58e8a: renamed from eth0
[ 17.627860] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
switching to polling mode: last cmd=0x003f0009
[ 17.688103] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 17.704087] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 17.707037] input: HDA Intel Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 17.707152] input: HDA Intel Front Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 17.707304] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 17.903728] Adding 1048572k swap on /dev/sdb2. Priority:-1 extents:1
across:1048572k FS
[ 17.949138] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 18.440081] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 18.606996] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 18.762127] EXT4-fs (sdb4): mounted filesystem with ordered data
mode. Opts: (null)
[ 18.933708] EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro,acl,user_xattr
[ 18.948332] EXT4-fs (sdb4): re-mounted. Opts: acl,user_xattr
[ 20.315887] usbcore: registered new interface driver usblp
[ 20.372666] enxb88584a58e8a: 0xffffb2ab81aed000, b8:85:84:a5:8e:8a,
IRQ 126
[ 22.264923] NET: Registered protocol family 10
[ 22.265736] IPv6: ADDRCONF(NETDEV_UP): enxb88584a58e8a: link is not ready
[ 23.512949] r8168: enxb88584a58e8a: link up
[ 23.512961] IPv6: ADDRCONF(NETDEV_CHANGE): enxb88584a58e8a: link
becomes ready
eis 2.8.25 #





Danke und Gruß Daniel
Daniel Kubein
2020-08-05 03:30:52 UTC
Permalink
Hallo Marcus,

und jetzt nochmal dmesg nachdem ich es wieder manuell gemountet habe.


Mount USB device

Looking up devices ...
Mount USB device

Nr Device Description Status
1 /dev/sda RAW device not mounted
2 /dev/sda1 238.5G 83 Linux not mounted

Select (1-2, ENTER=Return, 0=Exit)? 2


Mount successful with option 'ext4', path is '/media/usb/sda1'.
Press ENTER to continue
Mount USB device

Nr Device Description Status
1 /dev/sda RAW device blocked
2 /dev/sda1 238.5G 83 Linux mounted

Select (1-2, ENTER=Return, 0=Exit)?



Filesystem Type Size Used Avail Use% Mounted on
/dev/sdb3 ext4 153G 16G 130G 11% /
tmpfs tmpfs 7.8G 508K 7.8G 1% /run
devtmpfs devtmpfs 7.8G 0 7.8G 0% /dev
/dev/sdb1 ext4 89M 41M 42M 50% /boot
/dev/sdb4 ext4 762G 73M 723G 1% /data
tmpfs tmpfs 7.8G 0 7.8G 0% /run/shm
/dev/sda1 ext4 234G 60M 222G 1% /media/usb/sda1



eis 2.8.25 # dmesg
[ 0.000000] microcode: microcode updated early to revision 0xca, date
= 2019-10-03
[ 0.000000] Linux version 4.9.220-eisfair-64-VIRT (***@e64k49) (gcc
version 9.2.1 20200306 [revision
c5edde44f5b17b4891f17a63517f355bbf89e7d3] (eisfair Linux) ) #1 SMP Fri
Apr 24 20:31:28 CEST 2020
[ 0.000000] Command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating
point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds
registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is
960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a2bcafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcb000-0x00000000a2bcbfff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcc000-0x00000000a2bccfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a2bcd000-0x00000000b67cafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b67cb000-0x00000000b9b0dfff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9b0e000-0x00000000b9b8afff]
ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9b8b000-0x00000000ba047fff]
ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ba048000-0x00000000bacfefff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bacff000-0x00000000bacfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bad00000-0x00000000bf7fffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff]
reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff]
reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.1 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 3060/0NV0M7, BIOS 1.4.2 06/11/2019
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x43e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
[ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbad00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf50-0x000fcf5f] mapped
at [ffff93a3800fcf50]
[ 0.000000] Base memory trampoline at [ffff93a38008b000] 8b000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x24c26000, 0x24c26fff] PGTABLE
[ 0.000000] BRK [0x24c27000, 0x24c27fff] PGTABLE
[ 0.000000] BRK [0x24c28000, 0x24c28fff] PGTABLE
[ 0.000000] BRK [0x24c29000, 0x24c29fff] PGTABLE
[ 0.000000] BRK [0x24c2a000, 0x24c2afff] PGTABLE
[ 0.000000] BRK [0x24c2b000, 0x24c2bfff] PGTABLE
[ 0.000000] BRK [0x24c2c000, 0x24c2cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f755000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000B9B270A8 0000D4 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000B9B68590 000114 (v06 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000B9B27210 04137E (v02 DELL CBX3
01072009 INTL 20160527)
[ 0.000000] ACPI: FACS 0x00000000BA046080 000040
[ 0.000000] ACPI: APIC 0x00000000B9B686A8 0000A0 (v04 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000B9B68748 000044 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000B9B68790 00009C (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000B9B68830 00003C (v01 DELL CBX3
01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000B9B68870 0017D5 (v02 CpuRef CpuSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: BOOT 0x00000000B9B6A048 000028 (v01 DELL CBX3
01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6A070 0031C8 (v02 SaSsdt SaSsdt
00003000 INTL 20160527)
[ 0.000000] ACPI: HPET 0x00000000B9B6D238 000038 (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6D270 000E82 (v02 INTEL Ther_Rvp
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B6E0F8 0008D1 (v02 INTEL DELL_MFF
00000000 INTL 20160527)
[ 0.000000] ACPI: UEFI 0x00000000B9B6E9D0 000048 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: LPIT 0x00000000B9B6EA18 00005C (v01 INTEL CBX3
00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B9B6EA78 0027DE (v02 INTEL PtidDevc
00001000 INTL 20160527)
[ 0.000000] ACPI: SSDT 0x00000000B9B71258 0014E2 (v02 INTEL TbtTypeC
00000000 INTL 20160527)
[ 0.000000] ACPI: DBGP 0x00000000B9B72740 000034 (v01 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: DBG2 0x00000000B9B72778 000054 (v00 DELL\x CBX3
00000002 01000013)
[ 0.000000] ACPI: MSDM 0x00000000B9B727D0 000055 (v03 DELL CBX3
06222004 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000B9B72828 000176 (v03 DELL CBX3
01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x00000000B9B729A0 000144 (v02 Intel ADebTabl
00001000 INTL 20160527)
[ 0.000000] ACPI: DMAR 0x00000000B9B72AE8 0000A8 (v01 INTEL EDK2
00000002 01000013)
[ 0.000000] ACPI: TPM2 0x00000000B9B72B90 000034 (v04 DELL\x CBX3
00000001 AMI 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43e7fa000-0x43e7fdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000090fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000a2bcafff]
[ 0.000000] node 0: [mem 0x00000000a2bcd000-0x00000000b67cafff]
[ 0.000000] node 0: [mem 0x00000000bacff000-0x00000000bacfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043e7fffff]
[ 0.000000] Initmem setup node 0 [mem
0x0000000000001000-0x000000043e7fffff]
[ 0.000000] On node 0 totalpages: 4149082
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3984 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11616 pages used for memmap
[ 0.000000] DMA32 zone: 743370 pages, LIFO batch:31
[ 0.000000] Normal zone: 53152 pages used for memmap
[ 0.000000] Normal zone: 3401728 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] e820: [mem 0xbf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6
nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu s94360 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s94360 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 4084229
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16245904K/16596328K available (6277K kernel code,
597K rwdata, 1724K rodata, 1116K init, 448K bss, 350424K reserved, 0K
cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:4352 nr_irqs:1536 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 2100.000 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
[ 0.000313] pid_max: default: 32768 minimum: 301
[ 0.000456] ACPI: Core revision 20160831
[ 0.047525] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.048595] Dentry cache hash table entries: 2097152 (order: 12,
16777216 bytes)
[ 0.051780] Inode-cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.053333] Mount-cache hash table entries: 32768 (order: 6, 262144
bytes)
[ 0.053488] Mountpoint-cache hash table entries: 32768 (order: 6,
262144 bytes)
[ 0.053889] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.054030] ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
[ 0.054176] mce: CPU supports 12 MCE banks
[ 0.054320] CPU0: Thermal monitoring enabled (TM1)
[ 0.054489] process: using mwait in idle threads
[ 0.054628] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.054767] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.054907] Spectre V1 : Mitigation: usercopy/swapgs barriers and
__user pointer sanitization
[ 0.055104] Spectre V2 : Mitigation: Full generic retpoline
[ 0.055240] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
RSB on context switch
[ 0.055383] Spectre V2 : Enabling Restricted Speculation for firmware
calls
[ 0.055531] Spectre V2 : mitigation: Enabling conditional Indirect
Branch Prediction Barrier
[ 0.055689] Speculative Store Bypass: Mitigation: Speculative Store
Bypass disabled via prctl and seccomp
[ 0.055970] TAA: Mitigation: Clear CPU buffers
[ 0.056106] MDS: Mitigation: Clear CPU buffers
[ 0.056687] Freeing SMP alternatives memory: 28K
[ 0.059096] smpboot: Max logical packages: 1
[ 0.060484] DMAR: Host address width 39
[ 0.060618] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.060762] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap
1c0000c40660462 ecap 19e2ff0505e
[ 0.060917] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061057] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap
d2008c40660462 ecap f050da
[ 0.061203] DMAR: RMRR base: 0x000000ba5f3000 end: 0x000000ba83cfff
[ 0.061345] DMAR: RMRR base: 0x000000bd000000 end: 0x000000bf7fffff
[ 0.061486] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061625] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.064950] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.074541] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.114383] TSC deadline timer enabled
[ 0.114395] smpboot: CPU0: Intel(R) Core(TM) i5-8500T CPU @ 2.10GHz
(family: 0x6, model: 0x9e, stepping: 0xa)
[ 0.114842] Performance Events: PEBS fmt3+, Skylake events, 32-deep
LBR, full-width counters, Intel PMU driver.
[ 0.115457] ... version: 4
[ 0.115593] ... bit width: 48
[ 0.115728] ... generic registers: 8
[ 0.115864] ... value mask: 0000ffffffffffff
[ 0.116002] ... max period: 00007fffffffffff
[ 0.116140] ... fixed-purpose events: 3
[ 0.116275] ... event mask: 00000007000000ff
[ 0.116711] x86: Booting SMP configuration:
[ 0.116848] .... node #0, CPUs: #1 #2 #3 #4 #5
[ 0.138423] x86: Booted up 1 node, 6 CPUs
[ 0.138638] smpboot: Total of 6 processors activated (25344.00 BogoMIPS)
[ 0.144902] devtmpfs: initialized
[ 0.145095] x86/mm: Memory block size: 128MB
[ 0.149590] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.149803] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.149979] xor: automatically using best checksumming function avx
[ 0.150216] NET: Registered protocol family 16
[ 0.164632] cpuidle: using governor ladder
[ 0.164843] Simple Boot Flag at 0x47 set to 0x80
[ 0.165005] ACPI FADT declares the system doesn't support PCIe ASPM,
so disable it
[ 0.165149] ACPI: bus type PCI registered
[ 0.165361] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.165562] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.165712] PCI: Using configuration type 1 for base access
[ 0.165865] dmi type 0xB1 record - unknown flag
[ 0.232648] raid6: sse2x1 gen() 7401 MB/s
[ 0.300674] raid6: sse2x1 xor() 5379 MB/s
[ 0.368693] raid6: sse2x2 gen() 9299 MB/s
[ 0.436721] raid6: sse2x2 xor() 6334 MB/s
[ 0.504742] raid6: sse2x4 gen() 10939 MB/s
[ 0.572764] raid6: sse2x4 xor() 6876 MB/s
[ 0.640788] raid6: avx2x1 gen() 14995 MB/s
[ 0.708811] raid6: avx2x2 gen() 18421 MB/s
[ 0.776834] raid6: avx2x4 gen() 21371 MB/s
[ 0.776973] raid6: using algorithm avx2x4 gen() 21371 MB/s
[ 0.777112] raid6: using avx2x2 recovery algorithm
[ 0.777284] ACPI: Added _OSI(Module Device)
[ 0.777422] ACPI: Added _OSI(Processor Device)
[ 0.777558] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.777694] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.784614] ACPI: Executed 33 blocks of module-level executable AML code
[ 0.800814] ACPI: Dynamic OEM Table Load:
[ 0.801110] ACPI: SSDT 0xFFFF93A7AB089800 00057C (v02 PmRef Cpu0Ist
00003000 INTL 20160527)
[ 0.801762] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.802187] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[ 0.804026] ACPI: Dynamic OEM Table Load:
[ 0.804320] ACPI: SSDT 0xFFFF93A7AB081400 000400 (v02 PmRef Cpu0Cst
00003001 INTL 20160527)
[ 0.804928] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.805867] ACPI: Dynamic OEM Table Load:
[ 0.806162] ACPI: SSDT 0xFFFF93A7AB50A000 000EF1 (v02 PmRef ApIst
00003000 INTL 20160527)
[ 0.807418] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.807944] ACPI: Dynamic OEM Table Load:
[ 0.808237] ACPI: SSDT 0xFFFF93A7AB081800 00030A (v02 PmRef ApCst
00003000 INTL 20160527)
[ 0.808885] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.812852] ACPI: Interpreter enabled
[ 0.812999] ACPI: (supports S0 S5)
[ 0.813139] ACPI: Using IOAPIC for interrupt routing
[ 0.813327] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.828234] ACPI: Power Resource [USBC] (on)
[ 0.832382] ACPI: Power Resource [V0PR] (on)
[ 0.833045] ACPI: Power Resource [V1PR] (on)
[ 0.833685] ACPI: Power Resource [V2PR] (on)
[ 0.837877] ACPI: Power Resource [WRST] (on)
[ 0.841392] ACPI: Power Resource [FN00] (off)
[ 0.841626] ACPI: Power Resource [FN01] (off)
[ 0.841857] ACPI: Power Resource [FN02] (off)
[ 0.842086] ACPI: Power Resource [FN03] (off)
[ 0.842317] ACPI: Power Resource [FN04] (off)
[ 0.843308] ACPI: Power Resource [PIN] (off)
[ 0.844030] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.844178] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI]
[ 0.844520] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.844848] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.844993] acpi PNP0A08:00: FADT indicates ASPM is unsupported,
using BIOS configuration
[ 0.845553] PCI host bridge to bus 0000:00
[ 0.845693] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.845836] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.845979] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[ 0.846124] pci_bus 0000:00: root bus resource [mem
0xbf800000-0xf7ffffff window]
[ 0.846267] pci_bus 0000:00: root bus resource [mem
0xfc800000-0xfe7fffff window]
[ 0.846413] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.846560] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[ 0.847004] pci 0000:00:02.0: [8086:3e92] type 00 class 0x030000
[ 0.847015] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.847022] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.847027] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.847240] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.847252] pci 0000:00:08.0: reg 0x10: [mem 0xd121e000-0xd121efff 64bit]
[ 0.847503] pci 0000:00:12.0: [8086:a379] type 00 class 0x118000
[ 0.847541] pci 0000:00:12.0: reg 0x10: [mem 0xd121d000-0xd121dfff 64bit]
[ 0.847876] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
[ 0.847916] pci 0000:00:14.0: reg 0x10: [mem 0xd1200000-0xd120ffff 64bit]
[ 0.848065] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.848542] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.848741] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
[ 0.848775] pci 0000:00:14.2: reg 0x10: [mem 0xd1216000-0xd1217fff 64bit]
[ 0.848800] pci 0000:00:14.2: reg 0x18: [mem 0xd121c000-0xd121cfff 64bit]
[ 0.849070] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
[ 0.849106] pci 0000:00:16.0: reg 0x10: [mem 0xd121b000-0xd121bfff 64bit]
[ 0.849234] pci 0000:00:16.0: PME# supported from D3hot
[ 0.849529] pci 0000:00:17.0: [8086:2822] type 00 class 0x010400
[ 0.849561] pci 0000:00:17.0: reg 0x10: [mem 0xd1214000-0xd1215fff]
[ 0.849577] pci 0000:00:17.0: reg 0x14: [mem 0xd121a000-0xd121a0ff]
[ 0.849594] pci 0000:00:17.0: reg 0x18: [io 0x4090-0x4097]
[ 0.849610] pci 0000:00:17.0: reg 0x1c: [io 0x4080-0x4083]
[ 0.849626] pci 0000:00:17.0: reg 0x20: [io 0x4060-0x407f]
[ 0.849642] pci 0000:00:17.0: reg 0x24: [mem 0xd1219000-0xd12197ff]
[ 0.849732] pci 0000:00:17.0: PME# supported from D3hot
[ 0.850013] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
[ 0.850193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.850240] pci 0000:00:1c.0: PTM enabled (root), 4ns granularity
[ 0.850546] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.850819] pci 0000:00:1f.0: [8086:a304] type 00 class 0x060100
[ 0.851238] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
[ 0.851311] pci 0000:00:1f.3: reg 0x10: [mem 0xd1210000-0xd1213fff 64bit]
[ 0.851411] pci 0000:00:1f.3: reg 0x20: [mem 0xd1000000-0xd10fffff 64bit]
[ 0.851573] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.852424] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.852628] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
[ 0.852771] pci 0000:00:1f.4: reg 0x10: [mem 0xd1218000-0xd12180ff 64bit]
[ 0.852985] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
[ 0.853377] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
[ 0.853399] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[ 0.853718] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.853745] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.853785] pci 0000:01:00.0: reg 0x18: [mem 0xd1104000-0xd1104fff 64bit]
[ 0.853811] pci 0000:01:00.0: reg 0x20: [mem 0xd1100000-0xd1103fff 64bit]
[ 0.853948] pci 0000:01:00.0: supports D1 D2
[ 0.853949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.854031] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.868898] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.869040] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.869046] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.870550] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.870856] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871175] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871486] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.871797] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872107] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872418] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.872728] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS
(20160831/pci_link-176)
[ 0.873621] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.874051] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.874193] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.874342] vgaarb: loaded
[ 0.874475] vgaarb: bridge control possible 0000:00:02.0
[ 0.874715] PCI: Using ACPI for IRQ routing
[ 0.896016] PCI: pci_cache_line_size set to 64 bytes
[ 0.896109] e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
[ 0.896110] e820: reserve RAM buffer [mem 0xa2bcb000-0xa3ffffff]
[ 0.896111] e820: reserve RAM buffer [mem 0xb67cb000-0xb7ffffff]
[ 0.896111] e820: reserve RAM buffer [mem 0xbad00000-0xbbffffff]
[ 0.896112] e820: reserve RAM buffer [mem 0x43e800000-0x43fffffff]
[ 0.896410] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.897248] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.899473] clocksource: Switched to clocksource hpet
[ 0.899644] VFS: Disk quotas dquot_6.6.0
[ 0.899793] VFS: Dquot-cache hash table entries: 512 (order 0, 4096
bytes)
[ 0.899975] pnp: PnP ACPI init
[ 0.900413] system 00:00: [io 0x0a00-0x0a3f] has been reserved
[ 0.900576] system 00:00: [io 0x0a40-0x0a7f] has been reserved
[ 0.900717] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.901782] pnp 00:01: [dma 0 disabled]
[ 0.901828] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.902015] system 00:02: [io 0x0680-0x069f] has been reserved
[ 0.902177] system 00:02: [io 0x164e-0x164f] has been reserved
[ 0.902319] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.902340] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.902446] system 00:04: [io 0x1854-0x1857] has been reserved
[ 0.902610] system 00:04: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 0.902750] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.902913] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.903056] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.903200] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.903343] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.903545] system 00:05: [mem 0xfed90000-0xfed93fff] could not be
reserved
[ 0.903688] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.903830] system 00:05: [mem 0xfee00000-0xfeefffff] could not be
reserved
[ 0.903973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.904245] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 0.904408] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[ 0.904551] system 00:06: [mem 0xfd6c0000-0xfd6cffff] has been reserved
[ 0.904693] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[ 0.904837] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be
reserved
[ 0.904980] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[ 0.905122] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.905265] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.905624] system 00:07: [io 0x2000-0x20fe] has been reserved
[ 0.905787] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.907140] system 00:08: [mem 0xfd6e0000-0xfd6effff] has been reserved
[ 0.907305] system 00:08: [mem 0xfd6d0000-0xfd6dffff] has been reserved
[ 0.907448] system 00:08: [mem 0xfd6b0000-0xfd6bffff] has been reserved
[ 0.907658] system 00:08: [mem 0xfd6a0000-0xfd6affff] has been reserved
[ 0.907800] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.908627] pnp: PnP ACPI: found 9 devices
[ 0.914637] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[ 0.914855] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.914996] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.915144] pci 0000:00:1c.0: bridge window [mem 0xd1100000-0xd11fffff]
[ 0.915302] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.915303] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.915304] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff
window]
[ 0.915306] pci_bus 0000:00: resource 7 [mem 0xbf800000-0xf7ffffff
window]
[ 0.915307] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff
window]
[ 0.915308] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.915309] pci_bus 0000:01: resource 1 [mem 0xd1100000-0xd11fffff]
[ 0.915521] NET: Registered protocol family 2
[ 0.915826] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.916140] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.916390] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.916558] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.916743] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.916945] NET: Registered protocol family 1
[ 0.917096] pci 0000:00:02.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.917596] PCI: CLS 64 bytes, default 64
[ 0.917628] Trying to unpack rootfs image as initramfs...
[ 1.089701] Freeing initrd memory: 8876K
[ 1.089876] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.090022] software IO TLB: mapped [mem 0xb27cb000-0xb67cb000] (64MB)
[ 1.090667] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.093004] SGI XFS with ACLs, security attributes, realtime, no
debug enabled
[ 1.095071] async_tx: api initialized (async)
[ 1.095244] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 251)
[ 1.095457] io scheduler noop registered
[ 1.095669] io scheduler deadline registered (default)
[ 1.095837] io scheduler cfq registered
[ 1.096516] aer 0000:00:1c.0:pcie002: service driver aer loaded
[ 1.096604] vga16fb: initializing
[ 1.096606] vga16fb: mapped to 0xffff93a3800a0000
[ 1.221326] Console: switching to colour frame buffer device 80x30
[ 2.119541] tsc: Refined TSC clocksource calibration: 2112.006 MHz
[ 2.119555] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0x1e717e40680, max_idle_ns: 440795297614 ns
[ 2.385605] fb0: VGA16 VGA frame buffer device
[ 2.401075] intel_idle: MWAIT substates: 0x11142120
[ 2.401075] intel_idle: v0.4.1 model 0x9E
[ 2.401358] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.401504] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.416865] ACPI: Sleep Button [SLPB]
[ 2.431892] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 2.447076] ACPI: Power Button [PWRB]
[ 2.462106] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.477097] ACPI: Power Button [PWRF]
[ 2.492585] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.506808] ACPI: Thermal Zone [TZ00] (28 C)
[ 2.520633] GHES: HEST is not enabled!
[ 2.534239] xenfs: not registering filesystem on non-xen platform
[ 2.558067] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.593038] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200)
is a 16550A
[ 2.612562] brd: module loaded
[ 2.626564] tun: Universal TUN/TAP device driver, 1.6
[ 2.640653] tun: (C) 1999-2004 Max Krasnyansky <***@qualcomm.com>
[ 2.654393] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.670733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.684137] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.697403] hv_vmbus: registering driver hyperv_keyboard
[ 2.710963] mousedev: PS/2 mouse device common for all mice
[ 2.724313] rtc_cmos 00:03: RTC can wake from S4
[ 2.738334] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.751981] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes
nvram, hpet irqs
[ 2.765100] md: linear personality registered for level -1
[ 2.778513] md: raid0 personality registered for level 0
[ 2.791546] md: raid1 personality registered for level 1
[ 2.804240] md: raid10 personality registered for level 10
[ 2.816913] md: raid6 personality registered for level 6
[ 2.829208] md: raid5 personality registered for level 5
[ 2.841204] md: raid4 personality registered for level 4
[ 2.852974] md: multipath personality registered for level -4
[ 2.864972] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-***@redhat.com
[ 2.877236] intel_pstate: Intel P-state driver initializing
[ 2.889884] intel_pstate: HWP enabled
[ 2.900842] Initializing XFRM netlink socket
[ 2.911838] NET: Registered protocol family 17
[ 2.922344] NET: Registered protocol family 15
[ 2.932003] Key type dns_resolver registered
[ 2.941456] microcode: sig=0x906ea, pf=0x2, revision=0xca
[ 2.950824] microcode: Microcode Update Driver: v2.01
<***@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.970265] registered taskstats version 1
[ 2.981848] rtc_cmos 00:03: setting system clock to 2020-08-05
03:21:13 UTC (1596597673)
[ 3.144153] clocksource: Switched to clocksource tsc
[ 5.863909] floppy0: no floppy controllers found
[ 5.877763] Freeing unused kernel memory: 1116K
[ 5.888426] Write protecting the kernel read-only data: 10240k
[ 5.899454] Freeing unused kernel memory: 1900K
[ 5.910232] Freeing unused kernel memory: 324K
[ 5.988218] udevd[1482]: starting version 3.2.8
[ 5.998716] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.009192] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.019283] random: udevd: uninitialized urandom read (16 bytes read)
[ 6.029961] udevd[1483]: starting eudev-3.2.8
[ 6.093910] ACPI: bus type USB registered
[ 6.093942] usbcore: registered new interface driver usbfs
[ 6.093944] SCSI subsystem initialized
[ 6.093947] usbcore: registered new interface driver hub
[ 6.093980] usbcore: registered new device driver usb
[ 6.094757] libata version 3.00 loaded.
[ 6.094950] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.094952] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 1
[ 6.096288] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version
0x110 quirks 0x00009810
[ 6.096300] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.096445] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.096446] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.096446] usb usb1: Product: xHCI Host Controller
[ 6.096447] usb usb1: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.096448] usb usb1: SerialNumber: 0000:00:14.0
[ 6.096567] hub 1-0:1.0: USB hub found
[ 6.096605] hub 1-0:1.0: 16 ports detected
[ 6.097476] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.097478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned
bus number 2
[ 6.097479] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced
SuperSpeed
[ 6.097508] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.097509] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.097509] usb usb2: Product: xHCI Host Controller
[ 6.097510] usb usb2: Manufacturer: Linux 4.9.220-eisfair-64-VIRT
xhci-hcd
[ 6.097511] usb usb2: SerialNumber: 0000:00:14.0
[ 6.097626] hub 2-0:1.0: USB hub found
[ 6.097650] hub 2-0:1.0: 8 ports detected
[ 6.097947] usb: port power management may be unreliable
[ 6.098179] ahci 0000:00:17.0: version 3.0
[ 6.098322] ahci 0000:00:17.0: controller can't do SNTF, turning off
CAP_SNTF
[ 6.098460] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps
0x3 impl RAID mode
[ 6.098462] ahci 0000:00:17.0: flags: 64bit ncq pm clo only pio slum
part ems deso sadm sds apst
[ 6.107954] scsi host0: ahci
[ 6.108053] scsi host1: ahci
[ 6.108196] scsi host2: ahci
[ 6.108265] scsi host3: ahci
[ 6.108463] scsi host4: ahci
[ 6.108631] scsi host5: ahci
[ 6.108685] ata1: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219100 irq 124
[ 6.108689] ata2: SATA max UDMA/133 abar ***@0xd1219000 port
0xd1219180 irq 124
[ 6.108690] ata3: DUMMY
[ 6.108690] ata4: DUMMY
[ 6.108690] ata5: DUMMY
[ 6.108691] ata6: DUMMY
[ 6.422484] ata1: SATA link down (SStatus 4 SControl 300)
[ 6.422647] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 6.423539] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 6.474068] ata2.00: ATA-9: SAMSUNG SSD PM871b M.2 2280 256GB,
MVT23D0Q, max UDMA/133
[ 6.474069] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth
31/32), AA
[ 6.553535] ata2.00: configured for UDMA/133
[ 6.553712] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM87
3D0Q PQ: 0 ANSI: 5
[ 6.619475] usb 1-4: New USB device found, idVendor=059b, idProduct=0475
[ 6.619476] usb 1-4: New USB device strings: Mfr=10, Product=11,
SerialNumber=5
[ 6.619477] usb 1-4: Product: USB to ATA/ATAPI bridge
[ 6.619478] usb 1-4: Manufacturer: Iomega
[ 6.619478] usb 1-4: SerialNumber: 974CFFFFFFFF
[ 6.620905] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 6.621300] scsi host6: usb-storage 1-4:1.0
[ 6.621379] usbcore: registered new interface driver usb-storage
[ 6.693401] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256
GB/238 GiB)
[ 6.693427] sd 1:0:0:0: [sda] Write Protect is off
[ 6.693428] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.693431] sd 1:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 6.704435] sda: sda1
[ 6.704585] sd 1:0:0:0: [sda] Attached SCSI disk
[ 7.624589] scsi 6:0:0:0: Direct-Access ST310005 28AS
PQ: 0 ANSI: 2 CCS
[ 7.642622] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks:
(1.00 TB/932 GiB)
[ 7.658874] random: fast init done
[ 7.674985] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.690980] sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 7.691429] sd 6:0:0:0: [sdb] No Caching mode page found
[ 7.706738] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.727032] sdb: sdb1 sdb2 sdb3 sdb4
[ 7.742702] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 9.050038] EXT4-fs (sdb3): couldn't mount as ext3 due to feature
incompatibilities
[ 9.092828] EXT4-fs (sdb3): mounted filesystem with ordered data
mode. Opts: (null)
[ 12.727283] udevd[1621]: starting version 3.2.9
[ 12.941207] udevd[1622]: starting eudev-3.2.9
[ 13.217051] wmi: Mapper loaded
[ 13.374638] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.403627] udevd[1634]: could not read from
'/sys/module/pcc_cpufreq/initstate': No such device
[ 13.403819] Error: Driver 'pcspkr' is already registered, aborting...
[ 13.488115] snd_hda_codec_realtek hdaudioC0D0: autoconfig for
ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 13.511114] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1
(0x14/0x0/0x0/0x0/0x0)
[ 13.523170] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1
(0x21/0x0/0x0/0x0/0x0)
[ 13.534567] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 13.545775] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 13.556260] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a
[ 13.566588] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19
[ 13.584182] usbcore: registered new interface driver uas
[ 13.825370] random: crng init done
[ 13.836090] random: 7 urandom warning(s) missed due to ratelimiting
[ 13.859951] AVX2 version of gcm_enc/dec engaged.
[ 13.859990] r8168 Gigabit Ethernet driver 8.046.00-NAPI loaded
[ 13.875044] r8168: This product is covered by one or more of the
following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 13.875046] r8168 Copyright (C) 2018 Realtek NIC software team
<***@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for
details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to
redistribute it under certain conditions; see
<http://www.gnu.org/licenses/>.
[ 13.976129] AES CTR mode by8 optimization enabled
[ 14.306365] r8168 0000:01:00.0 enxb88584a58e8a: renamed from eth0
[ 17.627860] snd_hda_intel 0000:00:1f.3: azx_get_response timeout,
switching to polling mode: last cmd=0x003f0009
[ 17.688103] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 17.704087] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel
HDMI/DP codec
[ 17.707037] input: HDA Intel Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 17.707152] input: HDA Intel Front Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 17.707304] input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 17.903728] Adding 1048572k swap on /dev/sdb2. Priority:-1 extents:1
across:1048572k FS
[ 17.949138] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 18.440081] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[ 18.606996] EXT4-fs (sdb1): mounted filesystem with ordered data
mode. Opts: errors=remount-ro
[ 18.762127] EXT4-fs (sdb4): mounted filesystem with ordered data
mode. Opts: (null)
[ 18.933708] EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro,acl,user_xattr
[ 18.948332] EXT4-fs (sdb4): re-mounted. Opts: acl,user_xattr
[ 20.315887] usbcore: registered new interface driver usblp
[ 20.372666] enxb88584a58e8a: 0xffffb2ab81aed000, b8:85:84:a5:8e:8a,
IRQ 126
[ 22.264923] NET: Registered protocol family 10
[ 22.265736] IPv6: ADDRCONF(NETDEV_UP): enxb88584a58e8a: link is not ready
[ 23.512949] r8168: enxb88584a58e8a: link up
[ 23.512961] IPv6: ADDRCONF(NETDEV_CHANGE): enxb88584a58e8a: link
becomes ready
[ 425.500392] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
eis 2.8.25 #




Danke und Gruß Daniel
Marcus Röckrath
2020-08-05 06:04:31 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
und jetzt nochmal dmesg nachdem ich es wieder manuell gemountet habe.
Auch nichts zu sehen.

Bitte mal vor und nach dem manuellen mount ein lsmod ausführen, um zu sheen,
ob hier erst noch ein Modul geladen wird.

Statt im Menu kannst du auch auf der Kommandozeile

mount /dev/sda1

machen.
--
Gruß Marcus
[eisfair-Team]
Marcus Röckrath
2020-08-05 06:01:07 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Bitte ändere in /etc/init.d/mountfs die Zeile 94 von
/bin/mount -av 2>/dev/null
in
/bin/mount -av # 2>/dev/null
ab und schick mir den dmesg-Output nochmal nach Reboot zu.
In dmesg tauchen da keine Fehlermeldungen auf, die ich hoffte durch den
nicht ins Nirvana gesandten Fehlerkanal sehen zu können.

Taucht beim Boot an der Konsole irgendetwas auf, was auf einen Mountfehler
für sda1 schließen läßt - notfalls mal abfilmen und mir zusenden.
Post by Daniel Kubein
Und jetzt nochmal dmesg nach der Anpassung in automount
Du meinst /etc/init.d/mountfs?
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-08-19 03:56:25 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Taucht beim Boot an der Konsole irgendetwas auf, was auf einen Mountfehler
für sda1 schließen läßt - notfalls mal abfilmen und mir zusenden.
Ich hänge es unten mal an.
Post by Marcus Röckrath
Post by Daniel Kubein
Und jetzt nochmal dmesg nach der Anpassung in automount
Du meinst /etc/init.d/mountfs?
Ja, vertippt und in Gedanken woanders. :-D


Gruß Daniel


Log:


Aug 5 05:21:31 superkubi klogd: klogd 1.5.1, log source = /proc/kmsg
started.
Aug 5 05:21:31 superkubi klogd: Inspecting
/System.map-4.9.220-eisfair-64-VIRT
Aug 5 05:21:31 superkubi klogd: Loaded 57955 symbols from
/System.map-4.9.220-eisfair-64-VIRT.
Aug 5 05:21:31 superkubi klogd: Symbols match kernel version 4.9.220.
Aug 5 05:21:31 superkubi klogd: Loaded 6095 symbols from 50 modules.
Aug 5 05:21:31 superkubi klogd: microcode: microcode updated early to
revision 0xca, date = 2019-10-03
Aug 5 05:21:31 superkubi klogd: Linux version 4.9.220-eisfair-64-VIRT
(***@e64k49) (gcc version 9.2.1 20200306 [revision
c5edde44f5b17b4891f17a63517f355bbf89e7d3] (eisfair Linux) ) #1 SMP Fri
Apr 24 20:31:28 CEST 2020
Aug 5 05:21:31 superkubi klogd: Command line: auto BOOT_IMAGE=eis ro
root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31 raid=noautodetect
Aug 5 05:21:31 superkubi klogd: KERNEL supported cpus:
Aug 5 05:21:31 superkubi klogd: Intel GenuineIntel
Aug 5 05:21:31 superkubi klogd: AMD AuthenticAMD
Aug 5 05:21:31 superkubi klogd: Centaur CentaurHauls
Aug 5 05:21:31 superkubi klogd: x86/fpu: Supporting XSAVE feature
0x001: 'x87 floating point registers'
Aug 5 05:21:31 superkubi klogd: x86/fpu: Supporting XSAVE feature
0x002: 'SSE registers'
Aug 5 05:21:31 superkubi klogd: x86/fpu: Supporting XSAVE feature
0x004: 'AVX registers'
Aug 5 05:21:31 superkubi klogd: x86/fpu: Supporting XSAVE feature
0x008: 'MPX bounds registers'
Aug 5 05:21:31 superkubi klogd: x86/fpu: Supporting XSAVE feature
0x010: 'MPX CSR'
Aug 5 05:21:31 superkubi klogd: x86/fpu: xstate_offset[2]: 576,
xstate_sizes[2]: 256
Aug 5 05:21:31 superkubi klogd: x86/fpu: xstate_offset[3]: 832,
xstate_sizes[3]: 64
Aug 5 05:21:31 superkubi klogd: x86/fpu: xstate_offset[4]: 896,
xstate_sizes[4]: 64
Aug 5 05:21:31 superkubi klogd: x86/fpu: Enabled xstate features 0x1f,
context size is 960 bytes, using 'compacted' format.
Aug 5 05:21:31 superkubi klogd: e820: BIOS-provided physical RAM map:
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x0000000000000000-0x00000000000913ff] usable
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x0000000000091400-0x000000000009ffff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000000e0000-0x00000000000fffff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x0000000000100000-0x00000000a2bcafff] usable
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000a2bcb000-0x00000000a2bcbfff] ACPI NVS
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000a2bcc000-0x00000000a2bccfff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000a2bcd000-0x00000000b67cafff] usable
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000b67cb000-0x00000000b9b0dfff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000b9b0e000-0x00000000b9b8afff] ACPI data
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000b9b8b000-0x00000000ba047fff] ACPI NVS
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000ba048000-0x00000000bacfefff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000bacff000-0x00000000bacfffff] usable
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000bad00000-0x00000000bf7fffff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000f8000000-0x00000000fbffffff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000fe000000-0x00000000fe010fff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000fec00000-0x00000000fec00fff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000fee00000-0x00000000fee00fff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x00000000ff000000-0x00000000ffffffff] reserved
Aug 5 05:21:31 superkubi klogd: BIOS-e820: [mem
0x0000000100000000-0x000000043e7fffff] usable
Aug 5 05:21:31 superkubi klogd: NX (Execute Disable) protection: active
Aug 5 05:21:31 superkubi klogd: SMBIOS 3.1 present.
Aug 5 05:21:31 superkubi klogd: DMI: Dell Inc. OptiPlex 3060/0NV0M7,
BIOS 1.4.2 06/11/2019
Aug 5 05:21:31 superkubi klogd: e820: update [mem
0x00000000-0x00000fff] usable ==> reserved
Aug 5 05:21:31 superkubi klogd: e820: remove [mem
0x000a0000-0x000fffff] usable
Aug 5 05:21:31 superkubi klogd: e820: last_pfn = 0x43e800 max_arch_pfn
= 0x400000000
Aug 5 05:21:31 superkubi klogd: MTRR default type: write-back
Aug 5 05:21:31 superkubi klogd: MTRR fixed ranges enabled:
Aug 5 05:21:31 superkubi haveged: haveged starting up
Aug 5 05:21:31 superkubi klogd: 00000-9FFFF write-back
Aug 5 05:21:31 superkubi klogd: A0000-BFFFF uncachable
Aug 5 05:21:31 superkubi klogd: C0000-FFFFF write-protect
Aug 5 05:21:31 superkubi klogd: MTRR variable ranges enabled:
Aug 5 05:21:31 superkubi klogd: 0 base 00C0000000 mask 7FC0000000
uncachable
Aug 5 05:21:31 superkubi klogd: 1 base 00BE000000 mask 7FFE000000
uncachable
Aug 5 05:21:31 superkubi klogd: 2 base 00BD000000 mask 7FFF000000
uncachable
Aug 5 05:21:31 superkubi klogd: 3 disabled
Aug 5 05:21:31 superkubi klogd: 4 disabled
Aug 5 05:21:31 superkubi klogd: 5 disabled
Aug 5 05:21:31 superkubi klogd: 6 disabled
Aug 5 05:21:31 superkubi klogd: 7 disabled
Aug 5 05:21:31 superkubi haveged: haveged: AIS-31 tot procedure B:
success 872963 bytes fill 0
Aug 5 05:21:31 superkubi klogd: 8 disabled
Aug 5 05:21:31 superkubi haveged: haveged: procedure B: test6a:1/1,
test6b:1/1, test7a:2/2, test7b:4/4, test8:1/1
Aug 5 05:21:31 superkubi klogd: 9 disabled
Aug 5 05:21:31 superkubi klogd: x86/PAT: Configuration [0-7]: WB WC
UC- UC WB WC UC- WT
Aug 5 05:21:31 superkubi klogd: e820: last_pfn = 0xbad00 max_arch_pfn =
0x400000000
Aug 5 05:21:31 superkubi klogd: found SMP MP-table at [mem
0x000fcf50-0x000fcf5f] mapped at [ffff93a3800fcf50]
Aug 5 05:21:31 superkubi klogd: Base memory trampoline at
[ffff93a38008b000] 8b000 size 24576
Aug 5 05:21:31 superkubi klogd: Using GB pages for direct mapping
Aug 5 05:21:31 superkubi klogd: BRK [0x24c26000, 0x24c26fff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c27000, 0x24c27fff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c28000, 0x24c28fff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c29000, 0x24c29fff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c2a000, 0x24c2afff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c2b000, 0x24c2bfff] PGTABLE
Aug 5 05:21:31 superkubi klogd: BRK [0x24c2c000, 0x24c2cfff] PGTABLE
Aug 5 05:21:31 superkubi klogd: RAMDISK: [mem 0x7f755000-0x7fffffff]
Aug 5 05:21:31 superkubi klogd: ACPI: Early table checksum verification
disabled
Aug 5 05:21:31 superkubi klogd: ACPI: RSDP 0x00000000000F05B0 000024
(v02 DELL )
Aug 5 05:21:31 superkubi klogd: ACPI: XSDT 0x00000000B9B270A8 0000D4
(v01 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: FACP 0x00000000B9B68590 000114
(v06 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: DSDT 0x00000000B9B27210 04137E
(v02 DELL CBX3 01072009 INTL 20160527)
Aug 5 05:21:31 superkubi klogd: ACPI: FACS 0x00000000BA046080 000040
Aug 5 05:21:31 superkubi klogd: ACPI: APIC 0x00000000B9B686A8 0000A0
(v04 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: FPDT 0x00000000B9B68748 000044
(v01 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: FIDT 0x00000000B9B68790 00009C
(v01 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: MCFG 0x00000000B9B68830 00003C
(v01 DELL CBX3 01072009 MSFT 00000097)
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B68870 0017D5
(v02 CpuRef CpuSsdt 00003000 INTL 20160527)
Aug 5 05:21:31 superkubi klogd: ACPI: BOOT 0x00000000B9B6A048 000028
(v01 DELL CBX3 01072009 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B6A070 0031C8
(v02 SaSsdt SaSsdt 00003000 INTL 20160527)
Aug 5 05:21:31 superkubi klogd: ACPI: HPET 0x00000000B9B6D238 000038
(v01 INTEL CBX3 00000002 01000013)
Aug 5 05:21:31 superkubi haveged: haveged: AIS-31 tot procedure A:
success 1035716 bytes fill 0
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B6D270 000E82
(v02 INTEL Ther_Rvp 00001000 INTL 20160527)
Aug 5 05:21:31 superkubi haveged: haveged: procedure A: test0:1/1,
test1:257/257, test2:257/257, test3:257/257, test4:257/257, test5:2/2
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B6E0F8 0008D1
(v02 INTEL DELL_MFF 00000000 INTL 20160527)
Aug 5 05:21:31 superkubi haveged: haveged: ver: 1.9.8; arch: x86; vend:
GenuineIntel; build: (gcc 9.3.1 CITV); collect: 128K
Aug 5 05:21:31 superkubi klogd: ACPI: UEFI 0x00000000B9B6E9D0 000048
(v01 DELL\x CBX3 00000002 01000013)
Aug 5 05:21:31 superkubi haveged: haveged: cpu: (L4 VC); data: 32K (L4
V); inst: 32K (L4 V); idx: 25/40; sz: 32648/52575
Aug 5 05:21:31 superkubi klogd: ACPI: LPIT 0x00000000B9B6EA18 00005C
(v01 INTEL CBX3 00000002 01000013)
Aug 5 05:21:31 superkubi haveged: haveged: tot tests(BA8): A:1/1 B:1/1
continuous tests(B): last entropy estimate 7.99619
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B6EA78 0027DE
(v02 INTEL PtidDevc 00001000 INTL 20160527)
Aug 5 05:21:31 superkubi haveged: haveged: fills: 0, generated: 0
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B71258 0014E2
(v02 INTEL TbtTypeC 00000000 INTL 20160527)
Aug 5 05:21:31 superkubi klogd: ACPI: DBGP 0x00000000B9B72740 000034
(v01 DELL\x CBX3 00000002 01000013)
Aug 5 05:21:31 superkubi klogd: ACPI: DBG2 0x00000000B9B72778 000054
(v00 DELL\x CBX3 00000002 01000013)
Aug 5 05:21:31 superkubi haveged: haveged: 0 fill 7.50195 ms
Aug 5 05:21:31 superkubi klogd: ACPI: MSDM 0x00000000B9B727D0 000055
(v03 DELL CBX3 06222004 AMI 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: SLIC 0x00000000B9B72828 000176
(v03 DELL CBX3 01072009 MSFT 00010013)
Aug 5 05:21:31 superkubi klogd: ACPI: SSDT 0x00000000B9B729A0 000144
(v02 Intel ADebTabl 00001000 INTL 20160527)
Aug 5 05:21:31 superkubi klogd: ACPI: DMAR 0x00000000B9B72AE8 0000A8
(v01 INTEL EDK2 00000002 01000013)
Aug 5 05:21:31 superkubi klogd: ACPI: TPM2 0x00000000B9B72B90 000034
(v04 DELL\x CBX3 00000001 AMI 00000000)
Aug 5 05:21:31 superkubi klogd: ACPI: Local APIC address 0xfee00000
Aug 5 05:21:31 superkubi klogd: No NUMA configuration found
Aug 5 05:21:31 superkubi klogd: Faking a node at [mem
0x0000000000000000-0x000000043e7fffff]
Aug 5 05:21:31 superkubi klogd: NODE_DATA(0) allocated [mem
0x43e7fa000-0x43e7fdfff]
Aug 5 05:21:31 superkubi klogd: Zone ranges:
Aug 5 05:21:31 superkubi klogd: DMA [mem
0x0000000000001000-0x0000000000ffffff]
Aug 5 05:21:31 superkubi klogd: DMA32 [mem
0x0000000001000000-0x00000000ffffffff]
Aug 5 05:21:31 superkubi klogd: Normal [mem
0x0000000100000000-0x000000043e7fffff]
Aug 5 05:21:31 superkubi klogd: Movable zone start for each node
Aug 5 05:21:31 superkubi klogd: Early memory node ranges
Aug 5 05:21:31 superkubi klogd: node 0: [mem
0x0000000000001000-0x0000000000090fff]
Aug 5 05:21:31 superkubi klogd: node 0: [mem
0x0000000000100000-0x00000000a2bcafff]
Aug 5 05:21:31 superkubi klogd: node 0: [mem
0x00000000a2bcd000-0x00000000b67cafff]
Aug 5 05:21:31 superkubi klogd: node 0: [mem
0x00000000bacff000-0x00000000bacfffff]
Aug 5 05:21:31 superkubi klogd: node 0: [mem
0x0000000100000000-0x000000043e7fffff]
Aug 5 05:21:31 superkubi klogd: Initmem setup node 0 [mem
0x0000000000001000-0x000000043e7fffff]
Aug 5 05:21:31 superkubi klogd: On node 0 totalpages: 4149082
Aug 5 05:21:31 superkubi klogd: DMA zone: 64 pages used for memmap
Aug 5 05:21:31 superkubi klogd: DMA zone: 21 pages reserved
Aug 5 05:21:31 superkubi klogd: DMA zone: 3984 pages, LIFO batch:0
Aug 5 05:21:31 superkubi klogd: DMA32 zone: 11616 pages used for memmap
Aug 5 05:21:31 superkubi klogd: DMA32 zone: 743370 pages, LIFO batch:31
Aug 5 05:21:31 superkubi klogd: Normal zone: 53152 pages used for memmap
Aug 5 05:21:31 superkubi klogd: Normal zone: 3401728 pages, LIFO batch:31
Aug 5 05:21:31 superkubi klogd: ACPI: PM-Timer IO Port: 0x1808
Aug 5 05:21:31 superkubi klogd: ACPI: Local APIC address 0xfee00000
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x01] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x02] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x03] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x04] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x05] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: ACPI: LAPIC_NMI (acpi_id[0x06] high
edge lint[0x1])
Aug 5 05:21:31 superkubi klogd: IOAPIC[0]: apic_id 2, version 32,
address 0xfec00000, GSI 0-119
Aug 5 05:21:31 superkubi klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 0
global_irq 2 dfl dfl)
Aug 5 05:21:31 superkubi klogd: ACPI: INT_SRC_OVR (bus 0 bus_irq 9
global_irq 9 high level)
Aug 5 05:21:31 superkubi klogd: ACPI: IRQ0 used by override.
Aug 5 05:21:31 superkubi klogd: ACPI: IRQ9 used by override.
Aug 5 05:21:31 superkubi klogd: Using ACPI (MADT) for SMP configuration
information
Aug 5 05:21:31 superkubi klogd: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Aug 5 05:21:31 superkubi klogd: smpboot: Allowing 6 CPUs, 0 hotplug CPUs
Aug 5 05:21:31 superkubi klogd: e820: [mem 0xbf800000-0xf7ffffff]
available for PCI devices
Aug 5 05:21:31 superkubi klogd: Booting paravirtualized kernel on bare
hardware
Aug 5 05:21:31 superkubi klogd: clocksource: refined-jiffies: mask:
0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Aug 5 05:21:31 superkubi klogd: setup_percpu: NR_CPUS:8
nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
Aug 5 05:21:31 superkubi klogd: percpu: Embedded 33 pages/cpu s94360
r8192 d32616 u262144
Aug 5 05:21:31 superkubi klogd: pcpu-alloc: s94360 r8192 d32616 u262144
alloc=1*2097152
Aug 5 05:21:32 superkubi klogd: pcpu-alloc: [0] 0 1 2 3 4 5 - -
Aug 5 05:21:32 superkubi klogd: Built 1 zonelists in Node order,
mobility grouping on. Total pages: 4084229
Aug 5 05:21:32 superkubi klogd: Policy zone: Normal
Aug 5 05:21:32 superkubi klogd: Kernel command line: auto
BOOT_IMAGE=eis ro root=UUID=93d6d930-5b22-4c9e-bc0d-09ddbe4ecb31
raid=noautodetect
Aug 5 05:21:32 superkubi klogd: PID hash table entries: 4096 (order: 3,
32768 bytes)
Aug 5 05:21:32 superkubi klogd: Calgary: detecting Calgary via BIOS
EBDA area
Aug 5 05:21:32 superkubi klogd: Calgary: Unable to locate Rio Grande
table in EBDA - bailing!
Aug 5 05:21:32 superkubi klogd: Memory: 16245904K/16596328K available
(6277K kernel code, 597K rwdata, 1724K rodata, 1116K init, 448K bss,
350424K reserved, 0K cma-reserved)
Aug 5 05:21:32 superkubi klogd: SLUB: HWalign=64, Order=0-3,
MinObjects=0, CPUs=6, Nodes=1
Aug 5 05:21:32 superkubi klogd: Kernel/User page tables isolation: enabled
Aug 5 05:21:32 superkubi klogd: Hierarchical RCU implementation.
Aug 5 05:21:32 superkubi klogd: ^IBuild-time adjustment of leaf fanout
to 64.
Aug 5 05:21:32 superkubi klogd: ^IRCU restricting CPUs from NR_CPUS=8
to nr_cpu_ids=6.
Aug 5 05:21:32 superkubi klogd: RCU: Adjusting geometry for
rcu_fanout_leaf=64, nr_cpu_ids=6
Aug 5 05:21:32 superkubi klogd: NR_IRQS:4352 nr_irqs:1536 16
Aug 5 05:21:32 superkubi klogd: Console: colour VGA+ 80x25
Aug 5 05:21:32 superkubi klogd: console [tty0] enabled
Aug 5 05:21:32 superkubi klogd: clocksource: hpet: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
Aug 5 05:21:32 superkubi klogd: hpet clockevent registered
Aug 5 05:21:32 superkubi klogd: tsc: Detected 2100.000 MHz processor
Aug 5 05:21:32 superkubi klogd: Calibrating delay loop (skipped), value
calculated using timer frequency.. 4224.00 BogoMIPS (lpj=8448000)
Aug 5 05:21:32 superkubi klogd: pid_max: default: 32768 minimum: 301
Aug 5 05:21:32 superkubi klogd: ACPI: Core revision 20160831
Aug 5 05:21:32 superkubi klogd: ACPI: 8 ACPI AML tables successfully
acquired and loaded
Aug 5 05:21:32 superkubi klogd: Dentry cache hash table entries:
2097152 (order: 12, 16777216 bytes)
Aug 5 05:21:32 superkubi klogd: Inode-cache hash table entries: 1048576
(order: 11, 8388608 bytes)
Aug 5 05:21:32 superkubi klogd: Mount-cache hash table entries: 32768
(order: 6, 262144 bytes)
Aug 5 05:21:32 superkubi klogd: Mountpoint-cache hash table entries:
32768 (order: 6, 262144 bytes)
Aug 5 05:21:32 superkubi klogd: ENERGY_PERF_BIAS: Set to 'normal', was
'performance'
Aug 5 05:21:32 superkubi klogd: ENERGY_PERF_BIAS: View and update with
x86_energy_perf_policy(8)
Aug 5 05:21:32 superkubi klogd: mce: CPU supports 12 MCE banks
Aug 5 05:21:32 superkubi klogd: CPU0: Thermal monitoring enabled (TM1)
Aug 5 05:21:32 superkubi klogd: process: using mwait in idle threads
Aug 5 05:21:32 superkubi klogd: Last level iTLB entries: 4KB 128, 2MB
8, 4MB 8
Aug 5 05:21:32 superkubi klogd: Last level dTLB entries: 4KB 64, 2MB 0,
4MB 0, 1GB 4
Aug 5 05:21:32 superkubi klogd: Spectre V1 : Mitigation:
usercopy/swapgs barriers and __user pointer sanitization
Aug 5 05:21:32 superkubi klogd: Spectre V2 : Mitigation: Full generic
retpoline
Aug 5 05:21:32 superkubi klogd: Spectre V2 : Spectre v2 / SpectreRSB
mitigation: Filling RSB on context switch
Aug 5 05:21:32 superkubi klogd: Spectre V2 : Enabling Restricted
Speculation for firmware calls
Aug 5 05:21:32 superkubi klogd: Spectre V2 : mitigation: Enabling
conditional Indirect Branch Prediction Barrier
Aug 5 05:21:32 superkubi klogd: Speculative Store Bypass: Mitigation:
Speculative Store Bypass disabled via prctl and seccomp
Aug 5 05:21:32 superkubi klogd: TAA: Mitigation: Clear CPU buffers
Aug 5 05:21:32 superkubi klogd: MDS: Mitigation: Clear CPU buffers
Aug 5 05:21:32 superkubi klogd: Freeing SMP alternatives memory: 28K
Aug 5 05:21:32 superkubi klogd: smpboot: Max logical packages: 1
Aug 5 05:21:32 superkubi klogd: DMAR: Host address width 39
Aug 5 05:21:32 superkubi klogd: DMAR: DRHD base: 0x000000fed90000
flags: 0x0
Aug 5 05:21:32 superkubi klogd: DMAR: dmar0: reg_base_addr fed90000 ver
1:0 cap 1c0000c40660462 ecap 19e2ff0505e
Aug 5 05:21:32 superkubi klogd: DMAR: DRHD base: 0x000000fed91000
flags: 0x1
Aug 5 05:21:32 superkubi klogd: DMAR: dmar1: reg_base_addr fed91000 ver
1:0 cap d2008c40660462 ecap f050da
Aug 5 05:21:32 superkubi klogd: DMAR: RMRR base: 0x000000ba5f3000 end:
0x000000ba83cfff
Aug 5 05:21:32 superkubi klogd: DMAR: RMRR base: 0x000000bd000000 end:
0x000000bf7fffff
Aug 5 05:21:32 superkubi klogd: DMAR-IR: IOAPIC id 2 under DRHD base
0xfed91000 IOMMU 1
Aug 5 05:21:32 superkubi klogd: DMAR-IR: HPET id 0 under DRHD base
0xfed91000
Aug 5 05:21:32 superkubi klogd: DMAR-IR: Enabled IRQ remapping in xapic
mode
Aug 5 05:21:32 superkubi klogd: ..TIMER: vector=0x30 apic1=0 pin1=2
apic2=-1 pin2=-1
Aug 5 05:21:32 superkubi klogd: TSC deadline timer enabled
Aug 5 05:21:32 superkubi klogd: smpboot: CPU0: Intel(R) Core(TM)
i5-8500T CPU @ 2.10GHz (family: 0x6, model: 0x9e, stepping: 0xa)
Aug 5 05:21:32 superkubi klogd: Performance Events: PEBS fmt3+, Skylake
events, 32-deep LBR, full-width counters, Intel PMU driver.
Aug 5 05:21:32 superkubi klogd: ... version: 4
Aug 5 05:21:32 superkubi klogd: ... bit width: 48
Aug 5 05:21:32 superkubi klogd: ... generic registers: 8
Aug 5 05:21:32 superkubi klogd: ... value mask:
0000ffffffffffff
Aug 5 05:21:32 superkubi klogd: ... max period:
00007fffffffffff
Aug 5 05:21:32 superkubi klogd: ... fixed-purpose events: 3
Aug 5 05:21:32 superkubi klogd: ... event mask:
00000007000000ff
Aug 5 05:21:32 superkubi klogd: x86: Booting SMP configuration:
Aug 5 05:21:32 superkubi klogd: .... node #0, CPUs: #1 #2 #3 #4 #5
Aug 5 05:21:32 superkubi klogd: x86: Booted up 1 node, 6 CPUs
Aug 5 05:21:32 superkubi klogd: smpboot: Total of 6 processors
activated (25344.00 BogoMIPS)
Aug 5 05:21:32 superkubi klogd: devtmpfs: initialized
Aug 5 05:21:32 superkubi klogd: x86/mm: Memory block size: 128MB
Aug 5 05:21:32 superkubi klogd: clocksource: jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Aug 5 05:21:32 superkubi klogd: futex hash table entries: 2048 (order:
5, 131072 bytes)
Aug 5 05:21:32 superkubi klogd: xor: automatically using best
checksumming function avx
Aug 5 05:21:32 superkubi klogd: NET: Registered protocol family 16
Aug 5 05:21:32 superkubi klogd: cpuidle: using governor ladder
Aug 5 05:21:32 superkubi klogd: Simple Boot Flag at 0x47 set to 0x80
Aug 5 05:21:32 superkubi klogd: ACPI FADT declares the system doesn't
support PCIe ASPM, so disable it
Aug 5 05:21:32 superkubi klogd: ACPI: bus type PCI registered
Aug 5 05:21:32 superkubi klogd: PCI: MMCONFIG for domain 0000 [bus
00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
Aug 5 05:21:32 superkubi klogd: PCI: MMCONFIG at [mem
0xf8000000-0xfbffffff] reserved in E820
Aug 5 05:21:32 superkubi klogd: PCI: Using configuration type 1 for
base access
Aug 5 05:21:32 superkubi klogd: dmi type 0xB1 record - unknown flag
Aug 5 05:21:32 superkubi klogd: raid6: sse2x1 gen() 7401 MB/s
Aug 5 05:21:32 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/imap [file=/etc/xinetd.conf] [line=7]
Aug 5 05:21:32 superkubi klogd: raid6: sse2x1 xor() 5379 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: sse2x2 gen() 9299 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: sse2x2 xor() 6334 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: sse2x4 gen() 10939 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: sse2x4 xor() 6876 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: avx2x1 gen() 14995 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: avx2x2 gen() 18421 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: avx2x4 gen() 21371 MB/s
Aug 5 05:21:32 superkubi klogd: raid6: using algorithm avx2x4 gen()
21371 MB/s
Aug 5 05:21:32 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/pop3 [file=/etc/xinetd.d/pop3] [line=29]
Aug 5 05:21:32 superkubi klogd: raid6: using avx2x2 recovery algorithm
Aug 5 05:21:32 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=29]
Aug 5 05:21:32 superkubi klogd: ACPI: Added _OSI(Module Device)
Aug 5 05:21:32 superkubi klogd: ACPI: Added _OSI(Processor Device)
Aug 5 05:21:32 superkubi klogd: ACPI: Added _OSI(3.0 _SCP Extensions)
Aug 5 05:21:32 superkubi klogd: ACPI: Added _OSI(Processor Aggregator
Device)
Aug 5 05:21:32 superkubi klogd: ACPI: Executed 33 blocks of
module-level executable AML code
Aug 5 05:21:32 superkubi klogd: ACPI: Dynamic OEM Table Load:
Aug 5 05:21:32 superkubi klogd: ACPI: SSDT 0xFFFF93A7AB089800 00057C
(v02 PmRef Cpu0Ist 00003000 INTL 20160527)
Aug 5 05:21:32 superkubi klogd: ACPI: Executed 1 blocks of module-level
executable AML code
Aug 5 05:21:32 superkubi klogd: ACPI: \_SB_.PR00: _OSC native thermal
LVT Acked
Aug 5 05:21:32 superkubi klogd: ACPI: Dynamic OEM Table Load:
Aug 5 05:21:32 superkubi klogd: ACPI: SSDT 0xFFFF93A7AB081400 000400
(v02 PmRef Cpu0Cst 00003001 INTL 20160527)
Aug 5 05:21:32 superkubi klogd: ACPI: Executed 1 blocks of module-level
executable AML code
Aug 5 05:21:32 superkubi klogd: ACPI: Dynamic OEM Table Load:
Aug 5 05:21:32 superkubi xinetd[2158]: 2.3.15.4 started with libwrap
loadavg options compiled in.
Aug 5 05:21:32 superkubi xinetd[2158]: Started working: 2 available
services
Aug 5 05:21:32 superkubi klogd: ACPI: SSDT 0xFFFF93A7AB50A000 000EF1
(v02 PmRef ApIst 00003000 INTL 20160527)
Aug 5 05:21:32 superkubi klogd: ACPI: Executed 1 blocks of module-level
executable AML code
Aug 5 05:21:32 superkubi klogd: ACPI: Dynamic OEM Table Load:
Aug 5 05:21:32 superkubi klogd: ACPI: SSDT 0xFFFF93A7AB081800 00030A
(v02 PmRef ApCst 00003000 INTL 20160527)
Aug 5 05:21:32 superkubi klogd: ACPI: Executed 1 blocks of module-level
executable AML code
Aug 5 05:21:32 superkubi sshd[2169]: Server listening on 0.0.0.0 port 22.
Aug 5 05:21:32 superkubi klogd: ACPI: Interpreter enabled
Aug 5 05:21:32 superkubi sshd[2169]: Server listening on :: port 22.
Aug 5 05:21:32 superkubi klogd: ACPI: (supports S0 S5)
Aug 5 05:21:32 superkubi klogd: ACPI: Using IOAPIC for interrupt routing
Aug 5 05:21:32 superkubi klogd: PCI: Using host bridge windows from
ACPI; if necessary, use "pci=nocrs" and report a bug
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [USBC] (on)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [V0PR] (on)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [V1PR] (on)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [V2PR] (on)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [WRST] (on)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [FN00] (off)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [FN01] (off)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [FN02] (off)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [FN03] (off)
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [FN04] (off)
Aug 5 05:21:32 superkubi fcron[2180]: fcron[2180] 3.2.1 started
Aug 5 05:21:32 superkubi klogd: ACPI: Power Resource [PIN] (off)
Aug 5 05:21:32 superkubi fcron[2180]: updating configuration from
/var/spool/fcron
Aug 5 05:21:32 superkubi klogd: ACPI: PCI Root Bridge [PCI0] (domain
0000 [bus 00-3e])
Aug 5 05:21:32 superkubi fcron[2180]: adding file root
Aug 5 05:21:32 superkubi klogd: acpi PNP0A08:00: _OSC: OS supports
[ExtendedConfig ASPM ClockPM Segments MSI]
Aug 5 05:21:32 superkubi klogd: acpi PNP0A08:00: _OSC: platform does
not support [PME]
Aug 5 05:21:32 superkubi klogd: acpi PNP0A08:00: _OSC: OS now controls
[AER PCIeCapability]
Aug 5 05:21:32 superkubi klogd: acpi PNP0A08:00: FADT indicates ASPM is
unsupported, using BIOS configuration
Aug 5 05:21:32 superkubi klogd: PCI host bridge to bus 0000:00
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [io
0x0000-0x0cf7 window]
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [io
0x0d00-0xffff window]
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [mem
0xbf800000-0xf7ffffff window]
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [mem
0xfc800000-0xfe7fffff window]
Aug 5 05:21:32 superkubi klogd: pci_bus 0000:00: root bus resource [bus
00-3e]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:00.0: [8086:3ec2] type 00
class 0x060000
Aug 5 05:21:32 superkubi klogd: pci 0000:00:02.0: [8086:3e92] type 00
class 0x030000
Aug 5 05:21:32 superkubi klogd: pci 0000:00:02.0: reg 0x10: [mem
0xd0000000-0xd0ffffff 64bit]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:02.0: reg 0x18: [mem
0xc0000000-0xcfffffff 64bit pref]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:02.0: reg 0x20: [io
0x4000-0x403f]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:08.0: [8086:1911] type 00
class 0x088000
Aug 5 05:21:32 superkubi klogd: pci 0000:00:08.0: reg 0x10: [mem
0xd121e000-0xd121efff 64bit]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:12.0: [8086:a379] type 00
class 0x118000
Aug 5 05:21:32 superkubi klogd: pci 0000:00:12.0: reg 0x10: [mem
0xd121d000-0xd121dfff 64bit]
Aug 5 05:21:32 superkubi klogd: pci 0000:00:14.0: [8086:a36d] type 00
class 0x0c0330
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.0: reg 0x10: [mem
0xd1200000-0xd120ffff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.0: PME# supported from
D3hot D3cold
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.0: System wakeup
disabled by ACPI
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.2: [8086:a36f] type 00
class 0x050000
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.2: reg 0x10: [mem
0xd1216000-0xd1217fff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:14.2: reg 0x18: [mem
0xd121c000-0xd121cfff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:16.0: [8086:a360] type 00
class 0x078000
Aug 5 05:21:33 superkubi klogd: pci 0000:00:16.0: reg 0x10: [mem
0xd121b000-0xd121bfff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:16.0: PME# supported from D3hot
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: [8086:2822] type 00
class 0x010400
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x10: [mem
0xd1214000-0xd1215fff]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x14: [mem
0xd121a000-0xd121a0ff]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x18: [io
0x4090-0x4097]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x1c: [io
0x4080-0x4083]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x20: [io
0x4060-0x407f]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: reg 0x24: [mem
0xd1219000-0xd12197ff]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:17.0: PME# supported from D3hot
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: [8086:a33c] type 01
class 0x060400
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: PME# supported from
D0 D3hot D3cold
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: PTM enabled (root),
4ns granularity
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: System wakeup
disabled by ACPI
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.0: [8086:a304] type 00
class 0x060100
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.3: [8086:a348] type 00
class 0x040300
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.3: reg 0x10: [mem
0xd1210000-0xd1213fff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.3: reg 0x20: [mem
0xd1000000-0xd10fffff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.3: PME# supported from
D3hot D3cold
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.3: System wakeup
disabled by ACPI
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.4: [8086:a323] type 00
class 0x0c0500
Aug 5 05:21:33 superkubi fcrontab[2223]: installing file
/tmp/fcr-mBRGzh for user root
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.4: reg 0x10: [mem
0xd1218000-0xd12180ff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.4: reg 0x20: [io
0xefa0-0xefbf]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.5: [8086:a324] type 00
class 0x0c8000
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1f.5: reg 0x10: [mem
0xfe010000-0xfe010fff]
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: [10ec:8168] type 00
class 0x020000
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: reg 0x10: [io
0x3000-0x30ff]
Aug 5 05:21:33 superkubi fcron[2180]: updating configuration from
/var/spool/fcron
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: reg 0x18: [mem
0xd1104000-0xd1104fff 64bit]
Aug 5 05:21:33 superkubi fcron[2180]: adding new file root
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: reg 0x20: [mem
0xd1100000-0xd1103fff 64bit]
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: supports D1 D2
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: PME# supported from
D0 D1 D2 D3hot D3cold
Aug 5 05:21:33 superkubi klogd: pci 0000:01:00.0: System wakeup
disabled by ACPI
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: bridge window [io
0x3000-0x3fff]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: bridge window [mem
0xd1100000-0xd11fffff]
Aug 5 05:21:33 superkubi klogd: ACPI Exception: AE_NOT_FOUND,
Evaluating _PRS (20160831/pci_link-176)
Aug 5 05:21:33 superkubi last message repeated 7 times
Aug 5 05:21:33 superkubi klogd: ACPI: Enabled 5 GPEs in block 00 to 7F
Aug 5 05:21:33 superkubi klogd: vgaarb: setting as boot device:
PCI:0000:00:02.0
Aug 5 05:21:33 superkubi klogd: vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Aug 5 05:21:33 superkubi klogd: vgaarb: loaded
Aug 5 05:21:33 superkubi klogd: vgaarb: bridge control possible
0000:00:02.0
Aug 5 05:21:33 superkubi klogd: PCI: Using ACPI for IRQ routing
Aug 5 05:21:33 superkubi klogd: PCI: pci_cache_line_size set to 64 bytes
Aug 5 05:21:33 superkubi klogd: e820: reserve RAM buffer [mem
0x00091400-0x0009ffff]
Aug 5 05:21:33 superkubi klogd: e820: reserve RAM buffer [mem
0xa2bcb000-0xa3ffffff]
Aug 5 05:21:33 superkubi klogd: e820: reserve RAM buffer [mem
0xb67cb000-0xb7ffffff]
Aug 5 05:21:33 superkubi klogd: e820: reserve RAM buffer [mem
0xbad00000-0xbbffffff]
Aug 5 05:21:33 superkubi klogd: e820: reserve RAM buffer [mem
0x43e800000-0x43fffffff]
Aug 5 05:21:33 superkubi klogd: hpet0: at MMIO 0xfed00000, IRQs 2, 8,
0, 0, 0, 0, 0, 0
Aug 5 05:21:33 superkubi klogd: hpet0: 8 comparators, 64-bit 24.000000
MHz counter
Aug 5 05:21:33 superkubi klogd: clocksource: Switched to clocksource hpet
Aug 5 05:21:33 superkubi klogd: VFS: Disk quotas dquot_6.6.0
Aug 5 05:21:33 superkubi klogd: VFS: Dquot-cache hash table entries:
512 (order 0, 4096 bytes)
Aug 5 05:21:33 superkubi klogd: pnp: PnP ACPI init
Aug 5 05:21:33 superkubi klogd: system 00:00: [io 0x0a00-0x0a3f] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:00: [io 0x0a40-0x0a7f] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:00: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: pnp 00:01: [dma 0 disabled]
Aug 5 05:21:33 superkubi klogd: pnp 00:01: Plug and Play ACPI device,
IDs PNP0501 (active)
Aug 5 05:21:33 superkubi klogd: system 00:02: [io 0x0680-0x069f] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:02: [io 0x164e-0x164f] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:02: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: pnp 00:03: Plug and Play ACPI device,
IDs PNP0b00 (active)
Aug 5 05:21:33 superkubi klogd: system 00:04: [io 0x1854-0x1857] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:04: Plug and Play ACPI
device, IDs INT3f0d PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed10000-0xfed17fff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed18000-0xfed18fff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed19000-0xfed19fff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xf8000000-0xfbffffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed20000-0xfed3ffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed90000-0xfed93fff] could not be reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfed45000-0xfed8ffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: [mem
0xfee00000-0xfeefffff] could not be reserved
Aug 5 05:21:33 superkubi klogd: system 00:05: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: system 00:06: [io 0x1800-0x18fe] could
not be reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xfd000000-0xfd69ffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xfd6c0000-0xfd6cffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xfd6f0000-0xfdffffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xfe000000-0xfe01ffff] could not be reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xfe200000-0xfe7fffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: [mem
0xff000000-0xffffffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:06: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: system 00:07: [io 0x2000-0x20fe] has
been reserved
Aug 5 05:21:33 superkubi klogd: system 00:07: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: system 00:08: [mem
0xfd6e0000-0xfd6effff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:08: [mem
0xfd6d0000-0xfd6dffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:08: [mem
0xfd6b0000-0xfd6bffff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:08: [mem
0xfd6a0000-0xfd6affff] has been reserved
Aug 5 05:21:33 superkubi klogd: system 00:08: Plug and Play ACPI
device, IDs PNP0c02 (active)
Aug 5 05:21:33 superkubi klogd: pnp: PnP ACPI: found 9 devices
Aug 5 05:21:33 superkubi klogd: clocksource: acpi_pm: mask: 0xffffff
max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: PCI bridge to [bus 01]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: bridge window [io
0x3000-0x3fff]
Aug 5 05:21:33 superkubi klogd: pci 0000:00:1c.0: bridge window [mem
0xd1100000-0xd11fffff]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:00: resource 4 [io
0x0000-0x0cf7 window]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:00: resource 5 [io
0x0d00-0xffff window]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:00: resource 6 [mem
0x000a0000-0x000bffff window]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:00: resource 7 [mem
0xbf800000-0xf7ffffff window]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:00: resource 8 [mem
0xfc800000-0xfe7fffff window]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:01: resource 0 [io
0x3000-0x3fff]
Aug 5 05:21:33 superkubi klogd: pci_bus 0000:01: resource 1 [mem
0xd1100000-0xd11fffff]
Aug 5 05:21:33 superkubi klogd: NET: Registered protocol family 2
Aug 5 05:21:33 superkubi klogd: TCP established hash table entries:
131072 (order: 8, 1048576 bytes)
Aug 5 05:21:33 superkubi klogd: TCP bind hash table entries: 65536
(order: 8, 1048576 bytes)
Aug 5 05:21:33 superkubi klogd: TCP: Hash tables configured
(established 131072 bind 65536)
Aug 5 05:21:33 superkubi klogd: UDP hash table entries: 8192 (order: 6,
262144 bytes)
Aug 5 05:21:33 superkubi klogd: UDP-Lite hash table entries: 8192
(order: 6, 262144 bytes)
Aug 5 05:21:33 superkubi klogd: NET: Registered protocol family 1
Aug 5 05:21:33 superkubi klogd: pci 0000:00:02.0: Video device with
shadowed ROM at [mem 0x000c0000-0x000dffff]
Aug 5 05:21:33 superkubi klogd: PCI: CLS 64 bytes, default 64
Aug 5 05:21:33 superkubi klogd: Trying to unpack rootfs image as
initramfs...
Aug 5 05:21:33 superkubi klogd: Freeing initrd memory: 8876K
Aug 5 05:21:33 superkubi klogd: PCI-DMA: Using software bounce
buffering for IO (SWIOTLB)
Aug 5 05:21:33 superkubi klogd: software IO TLB: mapped [mem
0xb27cb000-0xb67cb000] (64MB)
Aug 5 05:21:33 superkubi klogd: workingset: timestamp_bits=40
max_order=22 bucket_order=0
Aug 5 05:21:33 superkubi klogd: SGI XFS with ACLs, security attributes,
realtime, no debug enabled
Aug 5 05:21:33 superkubi klogd: async_tx: api initialized (async)
Aug 5 05:21:33 superkubi klogd: Block layer SCSI generic (bsg) driver
version 0.4 loaded (major 251)
Aug 5 05:21:33 superkubi klogd: io scheduler noop registered
Aug 5 05:21:33 superkubi klogd: io scheduler deadline registered (default)
Aug 5 05:21:33 superkubi klogd: io scheduler cfq registered
Aug 5 05:21:33 superkubi klogd: aer 0000:00:1c.0:pcie002: service
driver aer loaded
Aug 5 05:21:33 superkubi klogd: vga16fb: initializing
Aug 5 05:21:33 superkubi klogd: vga16fb: mapped to 0xffff93a3800a0000
Aug 5 05:21:33 superkubi klogd: Console: switching to colour frame
buffer device 80x30
Aug 5 05:21:33 superkubi klogd: tsc: Refined TSC clocksource
calibration: 2112.006 MHz
Aug 5 05:21:33 superkubi klogd: clocksource: tsc: mask:
0xffffffffffffffff max_cycles: 0x1e717e40680, max_idle_ns: 440795297614 ns
Aug 5 05:21:33 superkubi klogd: fb0: VGA16 VGA frame buffer device
Aug 5 05:21:33 superkubi klogd: intel_idle: MWAIT substates: 0x11142120
Aug 5 05:21:33 superkubi klogd: intel_idle: v0.4.1 model 0x9E
Aug 5 05:21:33 superkubi klogd: intel_idle: lapic_timer_reliable_states
0xffffffff
Aug 5 05:21:33 superkubi klogd: input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
Aug 5 05:21:33 superkubi klogd: ACPI: Sleep Button [SLPB]
Aug 5 05:21:33 superkubi klogd: input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
Aug 5 05:21:33 superkubi klogd: ACPI: Power Button [PWRB]
Aug 5 05:21:33 superkubi klogd: input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Aug 5 05:21:33 superkubi klogd: ACPI: Power Button [PWRF]
Aug 5 05:21:33 superkubi klogd: thermal LNXTHERM:00: registered as
thermal_zone0
Aug 5 05:21:33 superkubi klogd: ACPI: Thermal Zone [TZ00] (28 C)
Aug 5 05:21:33 superkubi klogd: GHES: HEST is not enabled!
Aug 5 05:21:33 superkubi klogd: xenfs: not registering filesystem on
non-xen platform
Aug 5 05:21:33 superkubi klogd: Serial: 8250/16550 driver, 32 ports,
IRQ sharing enabled
Aug 5 05:21:33 superkubi klogd: 00:01: ttyS0 at I/O 0x3f8 (irq = 4,
base_baud = 115200) is a 16550A
Aug 5 05:21:33 superkubi klogd: brd: module loaded
Aug 5 05:21:33 superkubi klogd: tun: Universal TUN/TAP device driver, 1.6
Aug 5 05:21:33 superkubi klogd: tun: (C) 1999-2004 Max Krasnyansky
<***@qualcomm.com>
Aug 5 05:21:33 superkubi klogd: i8042: PNP: No PS/2 controller found.
Probing ports directly.
Aug 5 05:21:33 superkubi klogd: serio: i8042 KBD port at 0x60,0x64 irq 1
Aug 5 05:21:33 superkubi klogd: serio: i8042 AUX port at 0x60,0x64 irq 12
Aug 5 05:21:33 superkubi klogd: hv_vmbus: registering driver
hyperv_keyboard
Aug 5 05:21:33 superkubi klogd: mousedev: PS/2 mouse device common for
all mice
Aug 5 05:21:33 superkubi klogd: rtc_cmos 00:03: RTC can wake from S4
Aug 5 05:21:33 superkubi klogd: rtc_cmos 00:03: rtc core: registered
rtc_cmos as rtc0
Aug 5 05:21:33 superkubi klogd: rtc_cmos 00:03: alarms up to one month,
y3k, 242 bytes nvram, hpet irqs
Aug 5 05:21:33 superkubi klogd: md: linear personality registered for
level -1
Aug 5 05:21:33 superkubi klogd: md: raid0 personality registered for
level 0
Aug 5 05:21:33 superkubi klogd: md: raid1 personality registered for
level 1
Aug 5 05:21:33 superkubi klogd: md: raid10 personality registered for
level 10
Aug 5 05:21:33 superkubi klogd: md: raid6 personality registered for
level 6
Aug 5 05:21:33 superkubi klogd: md: raid5 personality registered for
level 5
Aug 5 05:21:33 superkubi klogd: md: raid4 personality registered for
level 4
Aug 5 05:21:33 superkubi klogd: md: multipath personality registered
for level -4
Aug 5 05:21:33 superkubi klogd: device-mapper: ioctl: 4.35.0-ioctl
(2016-06-23) initialised: dm-***@redhat.com
Aug 5 05:21:33 superkubi klogd: intel_pstate: Intel P-state driver
initializing
Aug 5 05:21:33 superkubi klogd: intel_pstate: HWP enabled
Aug 5 05:21:33 superkubi klogd: Initializing XFRM netlink socket
Aug 5 05:21:33 superkubi klogd: NET: Registered protocol family 17
Aug 5 05:21:33 superkubi klogd: NET: Registered protocol family 15
Aug 5 05:21:33 superkubi klogd: Key type dns_resolver registered
Aug 5 05:21:33 superkubi klogd: microcode: sig=0x906ea, pf=0x2,
revision=0xca
Aug 5 05:21:33 superkubi klogd: microcode: Microcode Update Driver:
v2.01 <***@aivazian.fsnet.co.uk>, Peter Oruba
Aug 5 05:21:33 superkubi klogd: registered taskstats version 1
Aug 5 05:21:33 superkubi klogd: rtc_cmos 00:03: setting system clock to
2020-08-05 03:21:13 UTC (1596597673)
Aug 5 05:21:33 superkubi klogd: clocksource: Switched to clocksource tsc
Aug 5 05:21:33 superkubi klogd: floppy0: no floppy controllers found
Aug 5 05:21:33 superkubi klogd: Freeing unused kernel memory: 1116K
Aug 5 05:21:33 superkubi klogd: Write protecting the kernel read-only
data: 10240k
Aug 5 05:21:33 superkubi klogd: Freeing unused kernel memory: 1900K
Aug 5 05:21:33 superkubi klogd: Freeing unused kernel memory: 324K
Aug 5 05:21:33 superkubi klogd: <30>udevd[1482]: starting version 3.2.8
Aug 5 05:21:33 superkubi klogd: random: udevd: uninitialized urandom
read (16 bytes read)
Aug 5 05:21:33 superkubi last message repeated 2 times
Aug 5 05:21:33 superkubi klogd: <30>udevd[1483]: starting eudev-3.2.8
Aug 5 05:21:33 superkubi klogd: ACPI: bus type USB registered
Aug 5 05:21:33 superkubi klogd: usbcore: registered new interface
driver usbfs
Aug 5 05:21:33 superkubi klogd: SCSI subsystem initialized
Aug 5 05:21:33 superkubi klogd: usbcore: registered new interface
driver hub
Aug 5 05:21:33 superkubi klogd: usbcore: registered new device driver usb
Aug 5 05:21:33 superkubi klogd: libata version 3.00 loaded.
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 1
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: hcc params
0x200077c1 hci version 0x110 quirks 0x00009810
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: cache line size
of 64 is not supported
Aug 5 05:21:33 superkubi klogd: usb usb1: New USB device found,
idVendor=1d6b, idProduct=0002
Aug 5 05:21:33 superkubi klogd: usb usb1: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Aug 5 05:21:33 superkubi klogd: usb usb1: Product: xHCI Host Controller
Aug 5 05:21:33 superkubi klogd: usb usb1: Manufacturer: Linux
4.9.220-eisfair-64-VIRT xhci-hcd
Aug 5 05:21:33 superkubi klogd: usb usb1: SerialNumber: 0000:00:14.0
Aug 5 05:21:33 superkubi klogd: hub 1-0:1.0: USB hub found
Aug 5 05:21:33 superkubi klogd: hub 1-0:1.0: 16 ports detected
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: xHCI Host Controller
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: new USB bus
registered, assigned bus number 2
Aug 5 05:21:33 superkubi klogd: xhci_hcd 0000:00:14.0: Host supports
USB 3.1 Enhanced SuperSpeed
Aug 5 05:21:33 superkubi klogd: usb usb2: New USB device found,
idVendor=1d6b, idProduct=0003
Aug 5 05:21:33 superkubi klogd: usb usb2: New USB device strings:
Mfr=3, Product=2, SerialNumber=1
Aug 5 05:21:33 superkubi klogd: usb usb2: Product: xHCI Host Controller
Aug 5 05:21:33 superkubi klogd: usb usb2: Manufacturer: Linux
4.9.220-eisfair-64-VIRT xhci-hcd
Aug 5 05:21:33 superkubi klogd: usb usb2: SerialNumber: 0000:00:14.0
Aug 5 05:21:33 superkubi klogd: hub 2-0:1.0: USB hub found
Aug 5 05:21:33 superkubi klogd: hub 2-0:1.0: 8 ports detected
Aug 5 05:21:33 superkubi klogd: usb: port power management may be
unreliable
Aug 5 05:21:33 superkubi klogd: ahci 0000:00:17.0: version 3.0
Aug 5 05:21:33 superkubi klogd: ahci 0000:00:17.0: controller can't do
SNTF, turning off CAP_SNTF
Aug 5 05:21:33 superkubi klogd: ahci 0000:00:17.0: AHCI 0001.0301 32
slots 6 ports 6 Gbps 0x3 impl RAID mode
Aug 5 05:21:33 superkubi klogd: ahci 0000:00:17.0: flags: 64bit ncq pm
clo only pio slum part ems deso sadm sds apst
Aug 5 05:21:33 superkubi klogd: scsi host0: ahci
Aug 5 05:21:33 superkubi klogd: scsi host1: ahci
Aug 5 05:21:33 superkubi klogd: scsi host2: ahci
Aug 5 05:21:33 superkubi klogd: scsi host3: ahci
Aug 5 05:21:33 superkubi klogd: scsi host4: ahci
Aug 5 05:21:33 superkubi klogd: scsi host5: ahci
Aug 5 05:21:33 superkubi klogd: ata1: SATA max UDMA/133 abar
***@0xd1219000 port 0xd1219100 irq 124
Aug 5 05:21:33 superkubi klogd: ata2: SATA max UDMA/133 abar
***@0xd1219000 port 0xd1219180 irq 124
Aug 5 05:21:33 superkubi klogd: ata3: DUMMY
Aug 5 05:21:33 superkubi klogd: ata4: DUMMY
Aug 5 05:21:33 superkubi klogd: ata5: DUMMY
Aug 5 05:21:33 superkubi klogd: ata6: DUMMY
Aug 5 05:21:33 superkubi klogd: ata1: SATA link down (SStatus 4
SControl 300)
Aug 5 05:21:33 superkubi klogd: ata2: SATA link up 6.0 Gbps (SStatus
133 SControl 300)
Aug 5 05:21:33 superkubi klogd: usb 1-4: new high-speed USB device
number 2 using xhci_hcd
Aug 5 05:21:33 superkubi klogd: ata2.00: ATA-9: SAMSUNG SSD PM871b M.2
2280 256GB, MVT23D0Q, max UDMA/133
Aug 5 05:21:33 superkubi klogd: ata2.00: 500118192 sectors, multi 1:
LBA48 NCQ (depth 31/32), AA
Aug 5 05:21:33 superkubi klogd: ata2.00: configured for UDMA/133
Aug 5 05:21:33 superkubi klogd: scsi 1:0:0:0: Direct-Access ATA
SAMSUNG SSD PM87 3D0Q PQ: 0 ANSI: 5
Aug 5 05:21:33 superkubi klogd: usb 1-4: New USB device found,
idVendor=059b, idProduct=0475
Aug 5 05:21:33 superkubi klogd: usb 1-4: New USB device strings:
Mfr=10, Product=11, SerialNumber=5
Aug 5 05:21:33 superkubi klogd: usb 1-4: Product: USB to ATA/ATAPI bridge
Aug 5 05:21:33 superkubi klogd: usb 1-4: Manufacturer: Iomega
Aug 5 05:21:33 superkubi klogd: usb 1-4: SerialNumber: 974CFFFFFFFF
Aug 5 05:21:33 superkubi klogd: usb-storage 1-4:1.0: USB Mass Storage
device detected
Aug 5 05:21:33 superkubi klogd: scsi host6: usb-storage 1-4:1.0
Aug 5 05:21:33 superkubi klogd: usbcore: registered new interface
driver usb-storage
Aug 5 05:21:33 superkubi klogd: sd 1:0:0:0: [sda] 500118192 512-byte
logical blocks: (256 GB/238 GiB)
Aug 5 05:21:33 superkubi klogd: sd 1:0:0:0: [sda] Write Protect is off
Aug 5 05:21:33 superkubi klogd: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Aug 5 05:21:33 superkubi klogd: sd 1:0:0:0: [sda] Write cache: enabled,
read cache: enabled, doesn't support DPO or FUA
Aug 5 05:21:33 superkubi klogd: sda: sda1
Aug 5 05:21:33 superkubi klogd: sd 1:0:0:0: [sda] Attached SCSI disk
Aug 5 05:21:33 superkubi klogd: scsi 6:0:0:0: Direct-Access
ST310005 28AS PQ: 0 ANSI: 2 CCS
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] 1953525168 512-byte
logical blocks: (1.00 TB/932 GiB)
Aug 5 05:21:33 superkubi klogd: random: fast init done
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] Write Protect is off
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] Mode Sense: 28 00 00 00
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] No Caching mode page
found
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] Assuming drive cache:
write through
Aug 5 05:21:33 superkubi klogd: sdb: sdb1 sdb2 sdb3 sdb4
Aug 5 05:21:33 superkubi klogd: sd 6:0:0:0: [sdb] Attached SCSI disk
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb3): couldn't mount as ext3
due to feature incompatibilities
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb3): mounted filesystem with
ordered data mode. Opts: (null)
Aug 5 05:21:33 superkubi klogd: <30>udevd[1621]: starting version 3.2.9
Aug 5 05:21:33 superkubi klogd: <30>udevd[1622]: starting eudev-3.2.9
Aug 5 05:21:33 superkubi klogd: wmi: Mapper loaded
Aug 5 05:21:33 superkubi klogd: input: PC Speaker as
/devices/platform/pcspkr/input/input6
Aug 5 05:21:33 superkubi klogd: <27>udevd[1634]: could not read from
'/sys/module/pcc_cpufreq/initstate': No such device
Aug 5 05:21:33 superkubi klogd: Error: Driver 'pcspkr' is already
registered, aborting...
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
mono: mono_out=0x0
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
inputs:
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
Headphone Mic=0x1a
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_realtek hdaudioC0D0:
Headset Mic=0x19
Aug 5 05:21:33 superkubi klogd: usbcore: registered new interface
driver uas
Aug 5 05:21:33 superkubi klogd: random: crng init done
Aug 5 05:21:33 superkubi klogd: random: 7 urandom warning(s) missed due
to ratelimiting
Aug 5 05:21:33 superkubi klogd: AVX2 version of gcm_enc/dec engaged.
Aug 5 05:21:33 superkubi klogd: r8168 Gigabit Ethernet driver
8.046.00-NAPI loaded
Aug 5 05:21:33 superkubi klogd: r8168: This product is covered by one
or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
Aug 5 05:21:33 superkubi klogd: r8168 Copyright (C) 2018 Realtek NIC
software team <***@realtek.com>
Aug 5 05:21:33 superkubi klogd: This program comes with ABSOLUTELY NO
WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
Aug 5 05:21:33 superkubi klogd: This is free software, and you are
welcome to redistribute it under certain conditions; see
<http://www.gnu.org/licenses/>.
Aug 5 05:21:33 superkubi klogd: AES CTR mode by8 optimization enabled
Aug 5 05:21:33 superkubi klogd: r8168 0000:01:00.0 enxb88584a58e8a:
renamed from eth0
Aug 5 05:21:33 superkubi klogd: snd_hda_intel 0000:00:1f.3:
azx_get_response timeout, switching to polling mode: last cmd=0x003f0009
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_hdmi hdaudioC0D2: No i915
binding for Intel HDMI/DP codec
Aug 5 05:21:33 superkubi klogd: snd_hda_codec_hdmi hdaudioC0D2: No i915
binding for Intel HDMI/DP codec
Aug 5 05:21:33 superkubi klogd: input: HDA Intel Headphone Mic as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input7
Aug 5 05:21:33 superkubi klogd: input: HDA Intel Front Line Out as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input8
Aug 5 05:21:33 superkubi klogd: input: HDA Intel HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:1f.3/sound/card0/input9
Aug 5 05:21:33 superkubi klogd: Adding 1048572k swap on /dev/sdb2.
Priority:-1 extents:1 across:1048572k FS
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb1): mounted filesystem with
ordered data mode. Opts: errors=remount-ro
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb4): mounted filesystem with
ordered data mode. Opts: (null)
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb3): re-mounted. Opts:
errors=remount-ro,acl,user_xattr
Aug 5 05:21:33 superkubi klogd: EXT4-fs (sdb4): re-mounted. Opts:
acl,user_xattr
Aug 5 05:21:33 superkubi klogd: usbcore: registered new interface
driver usblp
Aug 5 05:21:33 superkubi klogd: enxb88584a58e8a: 0xffffb2ab81aed000,
b8:85:84:a5:8e:8a, IRQ 126
Aug 5 05:21:33 superkubi klogd: NET: Registered protocol family 10
Aug 5 05:21:33 superkubi klogd: IPv6: ADDRCONF(NETDEV_UP):
enxb88584a58e8a: link is not ready
Aug 5 05:21:34 superkubi klogd: r8168: enxb88584a58e8a: link up
Aug 5 05:21:34 superkubi klogd: IPv6: ADDRCONF(NETDEV_CHANGE):
enxb88584a58e8a: link becomes ready
Aug 5 05:21:36 superkubi netdate: Syncing time using timeserver
time.fu-berlin.de
Aug 5 05:21:36 superkubi netdate: Trying 130.133.1.10...
Aug 5 05:21:36 superkubi netdate: time.fu-berlin.de -0.412 Wed Aug 5
05:21:34.000
Aug 5 05:21:44 superkubi su: (to exim) root on none
Aug 5 05:21:44 superkubi su: pam_unix(su:session): session opened for
user exim(uid=494) by (uid=0)
Aug 5 05:21:44 superkubi su: pam_unix(su:session): session closed for
user exim
Aug 5 05:21:45 superkubi xinetd[2158]: Starting reconfiguration
Aug 5 05:21:45 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/imap [file=/etc/xinetd.conf] [line=7]
Aug 5 05:21:45 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/pop3 [file=/etc/xinetd.d/pop3] [line=29]
Aug 5 05:21:45 superkubi xinetd[2158]: Reading included configuration
file: /etc/xinetd.d/time [file=/etc/xinetd.d/time] [line=29]
Aug 5 05:21:45 superkubi xinetd[2158]: Swapping defaults
Aug 5 05:21:45 superkubi xinetd[2158]: readjusting service time-stream
Aug 5 05:21:45 superkubi xinetd[2158]: readjusting service time-dgram
Aug 5 05:21:45 superkubi xinetd[2158]: Reconfigured: new=2 old=2
dropped=0 (services)
Aug 5 05:23:20 superkubi sshd[2697]: Accepted keyboard-interactive/pam
for root from 192.168.59.12 port 52289 ssh2
Aug 5 05:23:20 superkubi sshd[2697]: pam_unix(sshd:session): session
opened for user root(uid=0) by (uid=0)
Aug 5 05:28:15 superkubi klogd: EXT4-fs (sda1): mounted filesystem with
ordered data mode. Opts: (null)
Aug 5 05:29:01 superkubi sshd[2697]: pam_unix(sshd:session): session
closed for user root
Aug 5 05:29:15 superkubi sshd[8458]: Accepted keyboard-interactive/pam
for root from 192.168.59.12 port 52885 ssh2
Aug 5 05:29:15 superkubi sshd[8458]: pam_unix(sshd:session): session
opened for user root(uid=0) by (uid=0)
Aug 5 05:52:25 superkubi sshd[8458]: pam_unix(sshd:session): session
closed for user root
Marcus Röckrath
2020-08-19 05:07:51 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Taucht beim Boot an der Konsole irgendetwas auf, was auf einen
Mountfehler für sda1 schließen läßt - notfalls mal abfilmen und mir
zusenden.
Ich hänge es unten mal an.
Welches log ist das? /var/log/messages?
Post by Daniel Kubein
Aug 5 05:28:15 superkubi klogd: EXT4-fs (sda1): mounted filesystem with
ordered data mode. Opts: (null)
Hier wird was gemountet, was aber 5 Minuten nach dem Boot ist.

/var/log/messages hilft nicht weiter. Kannst du den Boot mal abfilmen?
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-08-24 03:50:30 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Welches log ist das? /var/log/messages?
Ja.
Post by Marcus Röckrath
Post by Daniel Kubein
Aug 5 05:28:15 superkubi klogd: EXT4-fs (sda1): mounted filesystem with
ordered data mode. Opts: (null)
Hier wird was gemountet, was aber 5 Minuten nach dem Boot ist.
/var/log/messages hilft nicht weiter. Kannst du den Boot mal abfilmen?
Ja, das ist aber aufwendig und werde ich nicht so schnell
erledigen können.

Gruß Daniel
Juergen Edner
2020-08-24 05:52:19 UTC
Permalink
Hallo zusammen,
Post by Daniel Kubein
Post by Marcus Röckrath
Welches log ist das? /var/log/messages?
Ja.
Post by Marcus Röckrath
Aug  5 05:28:15 superkubi klogd: EXT4-fs (sda1): mounted filesystem with
ordered data mode. Opts: (null)
Hier wird was gemountet, was aber 5 Minuten nach dem Boot ist.
/var/log/messages hilft nicht weiter. Kannst du den Boot mal abfilmen?
Ja, das ist aber aufwendig und werde ich nicht so schnell
erledigen können.
könnte der dmesg-Befehl eine Lösung sein?

Gruß Jürgen
--
Mail: ***@eisfair.org
Marcus Röckrath
2020-08-24 09:41:43 UTC
Permalink
Hallo Jürgen,
Post by Juergen Edner
könnte der dmesg-Befehl eine Lösung sein?
Den Output hat er schon gepostet, finde aber dort keine Info drin, die hier
weiterhilft.

Ich erhoffe mir vom Film weitere Infos von der Konsole.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-09-26 04:22:19 UTC
Permalink
Hallo Marcus.

ich habe es endlich geschafft.

http://superkubi.selfhost.eu/eiskernel/2020-09-26_autorun-error/2020-09-26_06-09-06-0906_desktop_abgefilmt.mov

Gruß Daniel
Marcus Röckrath
2020-09-26 06:51:14 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
ich habe es endlich geschafft.
Wie?
http://superkubi.selfhost.eu/eiskernel/2020-09-26_autorun-error/2020-09-26_06-09-06-0906_desktop_abgefilmt.mov

In dem Film sehe ich bei 1:05 nur das Problem, aber keinen keinen
erfolgreichen Mount.

Wenn im Initprozess die Platten aus der /etc/fstab gemountet werden sollen,
wird angemeckert, dass der Mountpoint /nvme_data nicht existiert.

Das die nvme-Platte korrekt erkannt wird zeigt darüber der fsck-Abschnitt,
der diese als Clean bezeichnet.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-10-04 04:48:09 UTC
Permalink
Hallo Marcus,
Post by Daniel Kubein
Post by Daniel Kubein
ich habe es endlich geschafft.
Wie?
Na das Video zu drehen habe ich endlich geschafft, wollte ich damit
sagen. Das Problem ist nicht gelöst!
Post by Daniel Kubein
http://superkubi.selfhost.eu/eiskernel/2020-09-26_autorun-error/2020-09-26_06-09-06-0906_desktop_abgefilmt.mov
In dem Film sehe ich bei 1:05 nur das Problem, aber keinen keinen
erfolgreichen Mount.
Wenn im Initprozess die Platten aus der /etc/fstab gemountet werden sollen,
wird angemeckert, dass der Mountpoint /nvme_data nicht existiert.
Das die nvme-Platte korrekt erkannt wird zeigt darüber der fsck-Abschnitt,
der diese als Clean bezeichnet.
Japp, du verstehst nun meine Ratlosigkeit?

Grüße Daniel
Marcus Röckrath
2020-10-04 07:32:57 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Post by Daniel Kubein
ich habe es endlich geschafft.
Wie?
Na das Video zu drehen habe ich endlich geschafft, wollte ich damit
sagen. Das Problem ist nicht gelöst!
Ok, dann habe ich dich gründlich missverstanden.
http://superkubi.selfhost.eu/eiskernel/2020-09-26_autorun-error/2020-09-26_06-09-06-0906_desktop_abgefilmt.mov
Post by Daniel Kubein
Post by Marcus Röckrath
In dem Film sehe ich bei 1:05 nur das Problem, aber keinen keinen
erfolgreichen Mount.
Wenn im Initprozess die Platten aus der /etc/fstab gemountet werden
sollen, wird angemeckert, dass der Mountpoint /nvme_data nicht existiert.
Das scheint mir doch die Richtung anzuzeigen:

mount: /nvme_data: mount point does not exist

Das kommt, wenn /etc/init.d/mountfs gestartet wird, erkennbar am Kommentar
"Mounting remaining file systems".

Ich nehme an, das er existiert, weil du ja nach dem Boot problemlos mounten
kannst.

Stellt sich die Frage, wieso er nun hier als nicht existent angemeckert
wird. /data liegt auf gleicher Ebene und kann problemlos eingemountet
werden.

Oder ist die Fehlermeldung irreführend und die nvme noch nicht bereeit
(Timing).

Haben wir schon mal getestet, ob ein Mount in /etc/init.d/local klappt?
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-11-13 03:21:22 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Haben wir schon mal getestet, ob ein Mount in /etc/init.d/local klappt?
Nein, das sagt mir nichts, was müsste ich denn hierbei machen?

Gruß Daniel
Marcus Röckrath
2020-11-13 05:21:08 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Haben wir schon mal getestet, ob ein Mount in /etc/init.d/local klappt?
Nein, das sagt mir nichts, was müsste ich denn hierbei machen?
Dort im Startzweig den Mount-Befehl eintragen.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2020-11-17 04:56:59 UTC
Permalink
Hallo Marcus
Post by Marcus Röckrath
Dort im Startzweig den Mount-Befehl eintragen.
Also einfach so hier ->


case $1
in
start)
;;

mount /dev/sda1 /media/usb/sda1

stop)
;;
esac



? Passt das so?


Gruß Daniel
Marcus Röckrath
2020-11-17 05:13:24 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Post by Marcus Röckrath
Dort im Startzweig den Mount-Befehl eintragen.
Also einfach so hier ->
case $1
in
start)
;;
mount /dev/sda1 /media/usb/sda1
stop)
;;
esac
? Passt das so?
Ja, ein umount im Stop-Zweig ist IMHO nicht nötig, da beim Runterfahren
sowieso die gemounteten Dateisysteme ausgehängt werden.
--
Gruß Marcus
[eisfair-Team]
Holger Bruenjes
2020-11-17 07:06:56 UTC
Permalink
Hallo Daniel
Post by Daniel Kubein
Post by Marcus Röckrath
Dort im Startzweig den Mount-Befehl eintragen.
Also einfach so hier ->
case $1
in
start)
- ;;
Post by Daniel Kubein
mount /dev/sda1 /media/usb/sda1
+ ;;
Post by Daniel Kubein
stop)
;;
esac
? Passt das so?
nein

die ';;' bilden jeweils den Schluss fuer das Kommando, organisiere
das um.

- -> Zeile entfernen
+ -> Zeile einfuegen

Holger
Daniel Kubein
2020-11-19 04:38:06 UTC
Permalink
Hallo Marcus, hallo Holger,

perfekt, das hat dann jetzt geklappt!
Vielen Dank!

Gruß Daniel
Marcus Röckrath
2020-11-19 05:24:37 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
perfekt, das hat dann jetzt geklappt!
Fein, danke für die Rückmeldung.
--
Gruß Marcus
[eisfair-Team]
Daniel Kubein
2021-09-10 06:21:57 UTC
Permalink
Hallo,

gut dass ich hier nochmal die Lösung damals geschrieben hatte.
Ich brauchte es jetzt beim Neuaufsetzen wieder und hatte mir
sogar noch in der Eile die FSTAB zerschossen, da ich mich
bei der UID vertippt hatte und die Kiste nicht mehr bootete.

Nun läuft aber wieder alles.

Das Einzige verwunderliche "der Automounter" in der
/etc/init.d/local
arbeitet verzögert.

Es dauert nach dem Start wo ich alles andere schon bedienen
kann noch ca. eine minute bis das Skript ausgeführt wird und
die Platte mountet.

Das war vorher nicht so, wurde da etwas in der Ablauffolge
in den letzten eis-Releases geändert?

Der Eintrag in der local sieht wie folgt aus:

case $1
in
start)
mount /dev/sda1 /media/usb/sda1
;;

stop)
;;
esac



Gruß Daniel
Marcus Röckrath
2021-09-10 12:25:47 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Das Einzige verwunderliche "der Automounter" in der
/etc/init.d/local
arbeitet verzögert.
Es dauert nach dem Start wo ich alles andere schon bedienen
kann noch ca. eine minute bis das Skript ausgeführt wird und
die Platte mountet.
Das war vorher nicht so, wurde da etwas in der Ablauffolge
in den letzten eis-Releases geändert?
Die Skripte in /etc/init.d (verlinkt im Runlevel /etc/rc2.d), gehören nicht
nur zum Basisystem sondern auch zu einzelnen Pakete (z. B. mail).
Post by Daniel Kubein
case $1
in
start)
mount /dev/sda1 /media/usb/sda1
;;
stop)
;;
esac
Wenn das erst nach einer Minute gestartet wird, ist einer der vorher
auszuführenden Skripte noch nicht fertig, da die ganzen Init-Skripte
sequentiell abgearbeitet werden.

Die Reihenfolge ergibt sich aus dem Namen in /etc/rc2.d, die alle mit
S<nummer> beginnen.

Jetzt müsste man eventuell über die Ausgabe von dmesg schauen, welcher
Prozess hier so lange Zeit zum Start benötigt und damit den Start von local
hinauszögert.
--
Gruß Marcus
[eisfair-Team]
Olaf Jaehrling
2021-09-10 18:23:06 UTC
Permalink
Hallo Daniel,
Post by Marcus Röckrath
Jetzt müsste man eventuell über die Ausgabe von dmesg schauen, welcher
Prozess hier so lange Zeit zum Start benötigt und damit den Start von local
hinauszögert.
Wenn du kannst schau auf der Konsole (Monitor) beim Starten was nach
"starting Openssh" (oder, so ähnlich aber openssh)
passiert und evtl . länger dauert.

Gruß

Olaf
--
Paketserver: https://ojaehrling.de/eis/index.txt
Nelson Matias
2021-09-11 08:55:44 UTC
Permalink
Hallo Daniel,
Post by Daniel Kubein
Es dauert nach dem Start wo ich alles andere schon bedienen
kann noch ca. eine minute bis das Skript ausgeführt wird und
die Platte mountet.
Da local erst sehr spät ausgeführt wird wirst du nicht um eine verfolgen
des Startvorgangs herum kommen. Kandidaten für die Verzögerung sind
aufwendig konfigurierte Mailserver oder MariaDB. Zumindest verursachen
die beiden bei mir je ca 15-20 sec.

Aber auf der anderen Seite. Sind 60 Sekunden wirklich so viel? Ich gebe
meinem Server bei einem Neustart immer so 5-10 Minuten. (Je nachdem ob
schon Kaffee fertig ist oder nicht)

Solltest du dennoch schnelle auf deinen Automount zugreifen
wollen/müssen, so schlage ich vor die Zeilen aus /etc/init.d/local in
eine andere datei in /etc/init.d (z.B. /etc/init.d/daniel_automount) zu
verschieben. in /etc/rc2.d schaust du dir alle scripte genau an und
setzt einen link zu deinem script wo du es starten willst. Dein link
heißt dann /etc/rc2.d/S??daniel_automount (die ?? durch eine passende
Zahl ersetzen, die der Position entspricht an der dein Mount passieren soll)
Auf diese weise brauchst du dir keine Sorgen machen, das ein Eis-Paket
dir dein Mount bei Installation oder Update zerschießt. Du solltest aber
bei deiner Restore Anleitung darauf eingehen, diese Dateien bei einem
neu aufgesetztem Eis zu prüfen und ggfs. wieder zu erstellen.

Gruß
Nelson
Marcus Röckrath
2021-09-11 11:44:55 UTC
Permalink
Hallo Nelson,
Post by Nelson Matias
Auf diese weise brauchst du dir keine Sorgen machen, das ein
Eis-Paket dir dein Mount bei Installation oder Update zerschießt.
/etc/init.d/local wird von keinem Update zerschossen, da sie genau dafür
gedacht ist, dass Anwender hier eigene Dinge beim Boot ausführen zu lassen.
--
Gruß Marcus
[eisfair-Team]
Nelson Matias
2021-09-13 05:28:18 UTC
Permalink
Hallo Marcus,
Post by Marcus Röckrath
Post by Nelson Matias
Auf diese weise brauchst du dir keine Sorgen machen, das ein
Eis-Paket dir dein Mount bei Installation oder Update zerschießt.
/etc/init.d/local wird von keinem Update zerschossen, da sie genau dafür
gedacht ist, dass Anwender hier eigene Dinge beim Boot ausführen zu lassen.
Diese Aussage bezog sich auf die Einführung eines eigenen scripts in
Daniels Fall, falls er die Startverzögerung nicht beheben kann und sein
mount eher ausführen lassen will.

Gruß
Nelson

Lesen Sie weiter auf narkive:
Loading...