Discussion:
NTFRS Errors
(too old to reply)
Eddie
2005-06-30 15:51:04 UTC
Permalink
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's


Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
Description:
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.

If this condition occurs frequently:

Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.

Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.

Consider increasing the staging area to improve system performance.


The current value of the staging space limit is 1105840 KB. To change the
staging space limit, run regedit:

Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".

For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Gabe Knuth
2005-06-30 16:07:42 UTC
Permalink
Did you increase the size like it says to do at the bottom of the error
message?
Post by Eddie
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's
Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.
Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.
Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.
Consider increasing the staging area to improve system performance.
The current value of the staging space limit is 1105840 KB. To change the
Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Eddie
2005-06-30 16:48:02 UTC
Permalink
yes..I am at 1.5gb and its still getting full. I ran the frsdiag and it had
15 errors related to access denied. Is this a group policy thing.
Post by Gabe Knuth
Did you increase the size like it says to do at the bottom of the error
message?
Post by Eddie
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's
Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.
Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.
Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.
Consider increasing the staging area to improve system performance.
The current value of the staging space limit is 1105840 KB. To change the
Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Eddie
2005-06-30 16:51:03 UTC
Permalink
this is what I am getting in the frsdiag

Checking for errors in debug logs ...
ERROR on NtFrs_0005.log : "ERROR_ACCESS_DENIED" : <DbsRecoverStagingAreas:
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|INFORMATION TECHNOLOGY : WStatus: ERROR_ACCESS_DENIED
ERROR on NtFrs_0005.log : "ERROR_ACCESS_DENIED" :
<DbsRecoverPreInstallFiles: 3616: 2912: S1: 12:47:13> ++ ERROR -
SetCurrentDirectory(f:\department
shares\administration\DO_NOT_REMOVE_NtFrs_PreInstall_Directory); WStatus:
ERROR_ACCESS_DENIED
ERROR on NtFrs_0005.log : "ERROR_ACCESS_DENIED" : <DbsRecoverStagingAreas:
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|ADMINISTRATION : WStatus: ERROR_ACCESS_DENIED

Found 12 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above

......... failed with 12 error entries
Checking NtFrs Service (and dependent services) state...passed
Checking NtFrs related Registry Keys for possible problems...
SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\Enable Journal Wrap
Automatic Restore = 1 :: ERROR: Enabling Journal Wrap Automatic Restore is
NOT recommended in post-SP2 version of FRS. Please see KB.292438
(Troubleshooting Journal_Wrap Errors on Sysvol and DFS Replica Sets) for
further information!
failed with 1 error(s) and 0 warning(s)

Checking Repadmin Showreps for errors...passed
Post by Gabe Knuth
Did you increase the size like it says to do at the bottom of the error
message?
Post by Eddie
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's
Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.
Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.
Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.
Consider increasing the staging area to improve system performance.
The current value of the staging space limit is 1105840 KB. To change the
Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Gabe Knuth
2005-06-30 17:13:15 UTC
Permalink
Not sure then...have a look at this:
http://www.eventid.net/display.asp?eventid=13522&eventno=893&source=NtFrs&phase=1
Post by Eddie
this is what I am getting in the frsdiag
Checking for errors in debug logs ...
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|INFORMATION TECHNOLOGY : WStatus: ERROR_ACCESS_DENIED
<DbsRecoverPreInstallFiles: 3616: 2912: S1: 12:47:13> ++ ERROR -
SetCurrentDirectory(f:\department
ERROR_ACCESS_DENIED
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|ADMINISTRATION : WStatus: ERROR_ACCESS_DENIED
Found 12 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above
......... failed with 12 error entries
Checking NtFrs Service (and dependent services) state...passed
Checking NtFrs related Registry Keys for possible problems...
SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\Enable Journal Wrap
Automatic Restore = 1 :: ERROR: Enabling Journal Wrap Automatic Restore is
NOT recommended in post-SP2 version of FRS. Please see KB.292438
(Troubleshooting Journal_Wrap Errors on Sysvol and DFS Replica Sets) for
further information!
failed with 1 error(s) and 0 warning(s)
Checking Repadmin Showreps for errors...passed
Post by Gabe Knuth
Did you increase the size like it says to do at the bottom of the error
message?
Post by Eddie
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's
Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.
Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.
Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.
Consider increasing the staging area to improve system performance.
The current value of the staging space limit is 1105840 KB. To change the
Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Eddie
2005-06-30 17:21:09 UTC
Permalink
is this just dfs errors or is it ad replication
Post by Gabe Knuth
http://www.eventid.net/display.asp?eventid=13522&eventno=893&source=NtFrs&phase=1
Post by Eddie
this is what I am getting in the frsdiag
Checking for errors in debug logs ...
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|INFORMATION TECHNOLOGY : WStatus: ERROR_ACCESS_DENIED
<DbsRecoverPreInstallFiles: 3616: 2912: S1: 12:47:13> ++ ERROR -
SetCurrentDirectory(f:\department
ERROR_ACCESS_DENIED
3616: 3398: S0: 12:47:13> ++ ERROR - Enumerating preinstall area for
SYNERGY|ADMINISTRATION : WStatus: ERROR_ACCESS_DENIED
Found 12 ERROR_ACCESS_DENIED error(s)! Latest ones (up to 3) listed above
......... failed with 12 error entries
Checking NtFrs Service (and dependent services) state...passed
Checking NtFrs related Registry Keys for possible problems...
SYSTEM\CurrentControlSet\Services\NtFrs\Parameters\Enable Journal Wrap
Automatic Restore = 1 :: ERROR: Enabling Journal Wrap Automatic Restore is
NOT recommended in post-SP2 version of FRS. Please see KB.292438
(Troubleshooting Journal_Wrap Errors on Sysvol and DFS Replica Sets) for
further information!
failed with 1 error(s) and 0 warning(s)
Checking Repadmin Showreps for errors...passed
Post by Gabe Knuth
Did you increase the size like it says to do at the bottom of the error
message?
Post by Eddie
I am getting the following on my dc. I only have 2 dc's and they can
replicate fine. I have already did a stop/start of the ntfrs on both dc's
Event Type: Warning
Event Source: NtFrs
Event Category: None
Event ID: 13522
Date: 6/30/2005
Time: 11:36:56 AM
User: N/A
Computer: SYNDC1
The File Replication Service paused because the staging area is full.
Staging files are used to replicate created, deleted or modified files
between partners. FRS will automatically remove least recently used files
from this staging area (in the order of the longest time since the last
access) until the amount of space in use has dropped below 60% of the staging
space-limit, after which replication will resume.
Confirm that all direct outbound replication partners receiving updates from
this member are online and receiving udpates.
Verify that the replication schedule for receiving partners is open or "on"
for a sufficient window of time to accomodate the number of files being
replicated.
Consider increasing the staging area to improve system performance.
The current value of the staging space limit is 1105840 KB. To change the
Click on Start -> Run and type REGEDT . Expand HKEY_LOCAL_MACHINE, SYSTEM,
CurrentControlSet, Services, NtFrs, Parameters, and the value "Staging Space
Limit in KB".
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Loading...