USB headset mic: slightly "robotic" voice when plugged into a usb 3.0 port

[Sergio Correia]

Hello folks,

when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 port,
it works normally.

I am testing on 3.4.0-rc5 with
0a6ba092d1c8c75ae0c0617ef7f4e6f5043af311 as the last commit [Merge tag
'mfd-for-linus-3.4-rc6' of
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6].
I observe the same behavior with a 3.3.4 kernel.

The device is this one:
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset

Here are two (noisy) small audio samples to illustrate the difference
between the recording if I use the USB 2.0 and 3.0 ports (no, I don't
use this mic to record music, but I thought it would illustrate the
problem heh)
USB 2.0-> http://www.uece.net/misc/usb-headset-problem/test-usb2.0.mp3
USB 3.0-> http://www.uece.net/misc/usb-headset-problem/test-usb3.0.mp3

I am pasting my full dmesg and config below (did I miss any important
stuff there?).
Let me know if is there any othe r useful info I could provide.

thanks,
sergio

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-rc5-git+ (***@zeppelin-asus)
(gcc version 4.7.0 20120414 (prerelease) (GCC) ) #30 SMP PREEMPT Fri
May 4 17:08:16 EDT 2012
[ 0.000000] Command line: root=/dev/sda6 ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000aac0d000 (usable)
[ 0.000000] BIOS-e820: 00000000aac0d000 - 00000000aad8e000 (reserved)
[ 0.000000] BIOS-e820: 00000000aad8e000 - 00000000aad95000 (usable)
[ 0.000000] BIOS-e820: 00000000aad95000 - 00000000aad96000 (reserved)
[ 0.000000] BIOS-e820: 00000000aad96000 - 00000000aad97000 (usable)
[ 0.000000] BIOS-e820: 00000000aad97000 - 00000000aadb8000 (reserved)
[ 0.000000] BIOS-e820: 00000000aadb8000 - 00000000aadc6000 (usable)
[ 0.000000] BIOS-e820: 00000000aadc6000 - 00000000aade8000 (reserved)
[ 0.000000] BIOS-e820: 00000000aade8000 - 00000000aaf23000 (usable)
[ 0.000000] BIOS-e820: 00000000aaf23000 - 00000000aafe8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
[ 0.000000] BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ab000000 - 00000000b0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001cf800000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: ASUSTeK Computer Inc. N53SV/N53SV, BIOS N53SV.215 01/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x1cf800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0A8000000 mask FFC000000 write-back
[ 0.000000] 4 base 0AB000000 mask FFF000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 1E0000000 mask FE0000000 uncachable
[ 0.000000] 7 base 1D0000000 mask FF0000000 uncachable
[ 0.000000] 8 base 1CF800000 mask FFF800000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000ab000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcc80] fcc80
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
[ 0.000000] 0000000000 - 00aae00000 page 2M
[ 0.000000] 00aae00000 - 00aaffd000 page 4k
[ 0.000000] kernel direct mapping tables up to aaffd000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001cf800000
[ 0.000000] 0100000000 - 01cf800000 page 2M
[ 0.000000] kernel direct mapping tables up to 1cf800000 @ aaff4000-aaffd000
[ 0.000000] RAMDISK: 1fe19000 - 1fff0000
[ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook
06222004 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000aaf9ad98 000F4 (v04 _ASUS_ Notebook
06222004 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two
FACS tables! (20120320/tbfadt-378)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT -
0xAAFE4E40/0x00000000AAFE4D40, using 32 (20120320/tbfadt-502)
[ 0.000000] ACPI: DSDT 00000000aaf86018 13852 (v01 _ASUS_ Notebook
00000000 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000aafe4e40 00040
[ 0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ Notebook
06222004 MSFT 00010013)
[ 0.000000] ACPI: DBGP 00000000aaffff18 00034 (v01 _ASUS_ Notebook
06222004 MSFT 00010013)
[ 0.000000] ACPI: ECDT 00000000aafe4b18 000C1 (v01 _ASUS_ Notebook
06222004 AMI. 00000003)
[ 0.000000] ACPI: SLIC 00000000aaf9be18 00176 (v01 _ASUS_ Notebook
06222004 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000aafe5d18 00038 (v01 _ASUS_ Notebook
06222004 AMI. 00000003)
[ 0.000000] ACPI: MCFG 00000000aafe5c98 0003C (v01 _ASUS_ Notebook
06222004 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000aaf85018 00955 (v01 PmRef Cpu0Ist
00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000aaf84018 00996 (v01 PmRef CpuPm
00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 00000000aafe4a18 000A0 (v32 INTEL HCG
00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001cf800000
[ 0.000000] Initmem setup node 0 0000000000000000-00000001cf800000
[ 0.000000] NODE_DATA [00000001cf7fc000 - 00000001cf7fffff]
[ 0.000000] [ffffea0000000000-ffffea00073fffff] PMD ->
[ffff8801c8e00000-ffff8801cedfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001cf800
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000aac0d
[ 0.000000] 0: 0x000aad8e -> 0x000aad95
[ 0.000000] 0: 0x000aad96 -> 0x000aad97
[ 0.000000] 0: 0x000aadb8 -> 0x000aadc6
[ 0.000000] 0: 0x000aade8 -> 0x000aaf23
[ 0.000000] 0: 0x000aafe8 -> 0x000aaffd
[ 0.000000] 0: 0x00100000 -> 0x001cf800
[ 0.000000] On node 0 totalpages: 1548545
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 678323 pages, LIFO batch:31
[ 0.000000] Normal zone: 13280 pages used for memmap
[ 0.000000] Normal zone: 836640 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] 16 Processors exceeds NR_CPUS limit of 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000aac0d000 - 00000000aad8e000
[ 0.000000] PM: Registered nosave memory: 00000000aad95000 - 00000000aad96000
[ 0.000000] PM: Registered nosave memory: 00000000aad97000 - 00000000aadb8000
[ 0.000000] PM: Registered nosave memory: 00000000aadc6000 - 00000000aade8000
[ 0.000000] PM: Registered nosave memory: 00000000aaf23000 - 00000000aafe8000
[ 0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
[ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000b0000000
[ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[ 0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at b0000000 (gap:
b0000000:30000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8801cf400000 s77824
r8192 d20480 u262144
[ 0.000000] pcpu-alloc: s77824 r8192 d20480 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1518876
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda6 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6005088k/7593984k available (10909k kernel
code, 1399804k absent, 189092k reserved, 6382k data, 600k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2194.962 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4389.92 BogoMIPS (lpj=2194962)
[ 0.000161] pid_max: default: 32768 minimum: 301
[ 0.000266] Security Framework initialized
[ 0.000343] SELinux: Initializing.
[ 0.000423] SELinux: Starting in permissive mode
[ 0.000908] Dentry cache hash table entries: 1048576 (order: 11,
8388608 bytes)
[ 0.002774] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003607] Mount-cache hash table entries: 256
[ 0.003843] Initializing cgroup subsys cpuacct
[ 0.003921] Initializing cgroup subsys freezer
[ 0.003998] Initializing cgroup subsys net_prio
[ 0.004095] CPU: Physical Processor ID: 0
[ 0.004172] CPU: Processor Core ID: 0
[ 0.004406] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004407] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.004569] mce: CPU supports 9 MCE banks
[ 0.004659] CPU0: Thermal monitoring enabled (TM1)
[ 0.005247] using mwait in idle threads.
[ 0.005416] ACPI: Core revision 20120320
[ 0.173426] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.183498] CPU0: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz stepping 07
[ 0.284902] Performance Events: PEBS fmt1+, 16-deep LBR,
SandyBridge events, Intel PMU driver.
[ 0.285186] PEBS disabled due to CPU errata.
[ 0.285265] ... version: 3
[ 0.285341] ... bit width: 48
[ 0.285417] ... generic registers: 4
[ 0.285494] ... value mask: 0000ffffffffffff
[ 0.285574] ... max period: 000000007fffffff
[ 0.285652] ... fixed-purpose events: 3
[ 0.285728] ... event mask: 000000070000000f
[ 0.296918] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 Ok.
[ 0.412117] Brought up 8 CPUs
[ 0.412198] Total of 8 processors activated (35119.39 BogoMIPS).
[ 0.419062] devtmpfs: initialized
[ 0.419291] PM: Registering ACPI NVS region [mem
0xaaf23000-0xaafe7fff] (806912 bytes)
[ 0.419454] RTC time: 17:56:27, date: 05/04/12
[ 0.419566] NET: Registered protocol family 16
[ 0.419758] ACPI FADT declares the system doesn't support PCIe
ASPM, so disable it
[ 0.419870] ACPI: bus type pci registered
[ 0.419986] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem
0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.420102] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.438233] PCI: Using configuration type 1 for base access
[ 0.440144] bio: create slab <bio-0> at 0
[ 0.440270] ACPI: Added _OSI(Module Device)
[ 0.440348] ACPI: Added _OSI(Processor Device)
[ 0.440424] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.440503] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.443674] ACPI: EC: EC description table is found, configuring boot EC
[ 0.443762] ACPI: EC: Look up EC in DSDT
[ 0.447044] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.453766] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.554291] ACPI: SSDT 00000000aadca798 0073F (v01 PmRef Cpu0Cst
00003001 INTL 20091112)
[ 0.555257] ACPI: Dynamic OEM Table Load:
[ 0.555418] ACPI: SSDT (null) 0073F (v01 PmRef Cpu0Cst
00003001 INTL 20091112)
[ 0.558881] ACPI: SSDT 00000000aadcba98 00303 (v01 PmRef ApIst
00003000 INTL 20091112)
[ 0.559876] ACPI: Dynamic OEM Table Load:
[ 0.560038] ACPI: SSDT (null) 00303 (v01 PmRef ApIst
00003000 INTL 20091112)
[ 0.563745] ACPI: SSDT 00000000aadc9d98 00119 (v01 PmRef ApCst
00003000 INTL 20091112)
[ 0.564704] ACPI: Dynamic OEM Table Load:
[ 0.564864] ACPI: SSDT (null) 00119 (v01 PmRef ApCst
00003000 INTL 20091112)
[ 0.569766] ACPI: Interpreter enabled
[ 0.569844] ACPI: (supports S0 S3 S4 S5)
[ 0.570117] ACPI: Using IOAPIC for interrupt routing
[ 0.677683] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[ 0.677983] ACPI: No dock devices found.
[ 0.678062] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[ 0.678629] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.679082] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.679165] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.679247] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.679357] pci_root PNP0A08:00: host bridge window [mem
0x000d0000-0x000d3fff]
[ 0.679471] pci_root PNP0A08:00: host bridge window [mem
0x000d4000-0x000d7fff]
[ 0.679580] pci_root PNP0A08:00: host bridge window [mem
0x000d8000-0x000dbfff]
[ 0.679692] pci_root PNP0A08:00: host bridge window [mem
0x000dc000-0x000dffff]
[ 0.679800] pci_root PNP0A08:00: host bridge window [mem
0x000e0000-0x000e3fff]
[ 0.679909] pci_root PNP0A08:00: host bridge window [mem
0x000e4000-0x000e7fff]
[ 0.680019] pci_root PNP0A08:00: host bridge window [mem
0xb0000000-0xfeafffff]
[ 0.680128] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[ 0.680258] PCI host bridge to bus 0000:00
[ 0.680337] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.680418] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.680500] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.680582] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.680664] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.680747] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.680830] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.680912] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.680996] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.681078] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfeafffff]
[ 0.681160] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.681252] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.681290] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.681325] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.681347] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[ 0.681359] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
[ 0.681366] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 0.681371] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
[ 0.681432] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.681457] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
[ 0.681537] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.681575] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.681598] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
[ 0.681693] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.681721] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.681739] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[ 0.681812] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.681838] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.681921] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.681949] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.682032] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.682060] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
[ 0.682144] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.682172] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.682255] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.682290] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.682313] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
[ 0.682409] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.682439] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
[ 0.682571] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
[ 0.682592] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
[ 0.682601] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
[ 0.682610] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
[ 0.682619] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
[ 0.682628] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
[ 0.682637] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
[ 0.682686] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.682706] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.682723] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[ 0.682747] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
[ 0.682812] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
[ 0.682824] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
[ 0.682838] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.682851] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.682861] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
[ 0.682870] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
[ 0.684437] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.684555] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.684558] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 0.684562] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 0.684609] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.684692] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 0.684697] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 0.684704] pci 0000:00:1c.0: bridge window [mem
0xd4200000-0xd4bfffff 64bit pref]
[ 0.684777] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
[ 0.684806] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
[ 0.684941] pci 0000:03:00.0: supports D1
[ 0.684942] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.686437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.686554] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 0.686559] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 0.686566] pci 0000:00:1c.1: bridge window [mem
0xd3700000-0xd40fffff 64bit pref]
[ 0.686638] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
[ 0.686662] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
[ 0.686828] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 0.688434] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.688551] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 0.688556] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 0.688563] pci 0000:00:1c.3: bridge window [mem
0xd2c00000-0xd35fffff 64bit pref]
[ 0.688691] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.688761] pci 0000:05:00.0: reg 10: [io 0x9000-0x90ff]
[ 0.688882] pci 0000:05:00.0: reg 18: [mem 0xd2104000-0xd2104fff 64bit pref]
[ 0.688953] pci 0000:05:00.0: reg 20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 0.689282] pci 0000:05:00.0: supports D1 D2
[ 0.689283] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.691457] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.691570] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 0.691575] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 0.691582] pci 0000:00:1c.5: bridge window [mem
0xd2100000-0xd2afffff 64bit pref]
[ 0.691607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.691714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.691789] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.691821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.691854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.691887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.692075] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.692448] pci0000:00: ACPI _OSC control (0x1d) granted
[ 1.392100] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.392655] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[ 1.393158] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 12)
[ 1.393660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[ 1.394164] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12)
*0, disabled.
[ 1.394779] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12)
*0, disabled.
[ 1.395394] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.395900] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 12)
[ 1.396421] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.396542] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.396656] vgaarb: loaded
[ 1.396730] vgaarb: bridge control possible 0000:01:00.0
[ 1.396808] vgaarb: no bridge control possible 0000:00:02.0
[ 1.396936] SCSI subsystem initialized
[ 1.397035] libata version 3.00 loaded.
[ 1.397066] usbcore: registered new interface driver usbfs
[ 1.397152] usbcore: registered new interface driver hub
[ 1.397246] usbcore: registered new device driver usb
[ 1.397341] Linux video capture interface: v2.00
[ 1.397618] wmi: Mapper loaded
[ 1.397706] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 1.397787] PCI: Using ACPI for IRQ routing
[ 1.399436] PCI: pci_cache_line_size set to 64 bytes
[ 1.399521] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 1.399523] reserve RAM buffer: 00000000aac0d000 - 00000000abffffff
[ 1.399529] reserve RAM buffer: 00000000aad95000 - 00000000abffffff
[ 1.399532] reserve RAM buffer: 00000000aad97000 - 00000000abffffff
[ 1.399535] reserve RAM buffer: 00000000aadc6000 - 00000000abffffff
[ 1.399537] reserve RAM buffer: 00000000aaf23000 - 00000000abffffff
[ 1.399539] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff
[ 1.399542] reserve RAM buffer: 00000001cf800000 - 00000001cfffffff
[ 1.399618] Bluetooth: Core ver 2.16
[ 1.399700] NET: Registered protocol family 31
[ 1.399779] Bluetooth: HCI device and connection manager initialized
[ 1.399860] Bluetooth: HCI socket layer initialized
[ 1.399939] Bluetooth: L2CAP socket layer initialized
[ 1.400023] Bluetooth: SCO socket layer initialized
[ 1.400136] cfg80211: Calling CRDA to update world regulatory domain
[ 1.400335] NetLabel: Initializing
[ 1.400409] NetLabel: domain hash size = 128
[ 1.400487] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.400578] NetLabel: unlabeled traffic allowed by default
[ 1.400698] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.401164] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.403260] Switching to clocksource hpet
[ 1.408574] pnp: PnP ACPI init
[ 1.408658] ACPI: bus type pnp registered
[ 1.408953] pnp 00:00: [bus 00-3e]
[ 1.408956] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.408958] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.408960] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.408963] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.408965] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.408967] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.408969] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.408971] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.408973] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.408975] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.408977] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.408979] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.408981] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.408983] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.408985] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.408987] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.408989] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.408991] pnp 00:00: [mem 0xb0000000-0xfeafffff window]
[ 1.408993] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.409049] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08
PNP0a03 (active)
[ 1.458595] pnp 00:01: [io 0x0000-0x001f]
[ 1.458597] pnp 00:01: [io 0x0081-0x0091]
[ 1.458599] pnp 00:01: [io 0x0093-0x009f]
[ 1.458601] pnp 00:01: [io 0x00c0-0x00df]
[ 1.458603] pnp 00:01: [dma 4]
[ 1.458622] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.458629] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.458647] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.458725] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.458742] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.458751] pnp 00:04: [io 0x00f0]
[ 1.458760] pnp 00:04: [irq 13]
[ 1.458776] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.458786] pnp 00:05: [io 0x002e-0x002f]
[ 1.458787] pnp 00:05: [io 0x004e-0x004f]
[ 1.458789] pnp 00:05: [io 0x0061]
[ 1.458791] pnp 00:05: [io 0x0063]
[ 1.458792] pnp 00:05: [io 0x0065]
[ 1.458794] pnp 00:05: [io 0x0067]
[ 1.458795] pnp 00:05: [io 0x0070]
[ 1.458797] pnp 00:05: [io 0x0080]
[ 1.458798] pnp 00:05: [io 0x0092]
[ 1.458800] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.458801] pnp 00:05: [io 0x0680-0x069f]
[ 1.458803] pnp 00:05: [io 0x1000-0x100f]
[ 1.458805] pnp 00:05: [io 0xffff]
[ 1.458806] pnp 00:05: [io 0xffff]
[ 1.458808] pnp 00:05: [io 0x0400-0x0453]
[ 1.458809] pnp 00:05: [io 0x0458-0x047f]
[ 1.458811] pnp 00:05: [io 0x0500-0x057f]
[ 1.458814] pnp 00:05: [io 0x164e-0x164f]
[ 1.458852] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.458933] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.459016] system 00:05: [io 0xffff] has been reserved
[ 1.459098] system 00:05: [io 0xffff] has been reserved
[ 1.459177] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.459258] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.459339] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.459421] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.459511] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.459520] pnp 00:06: [io 0x0070-0x0077]
[ 1.459525] pnp 00:06: [irq 8]
[ 1.459543] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.459561] pnp 00:07: [io 0x0454-0x0457]
[ 1.459589] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.459672] system 00:07: Plug and Play ACPI device, IDs INT3f0d
PNP0c02 (active)
[ 1.459683] pnp 00:08: [io 0x0240-0x0259]
[ 1.459710] system 00:08: [io 0x0240-0x0259] has been reserved
[ 1.459791] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.459824] pnp 00:09: [irq 12]
[ 1.459846] pnp 00:09: Plug and Play ACPI device, IDs ETD0001
SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.459863] pnp 00:0a: [io 0x0060]
[ 1.459865] pnp 00:0a: [io 0x0064]
[ 1.459869] pnp 00:0a: [irq 1]
[ 1.459888] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303
PNP030b (active)
[ 1.460084] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[ 1.460086] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[ 1.460088] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[ 1.460090] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[ 1.460092] pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
[ 1.460094] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[ 1.460095] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[ 1.460097] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[ 1.460099] pnp 00:0b: [mem 0xff000000-0xffffffff]
[ 1.460101] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[ 1.460103] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.460155] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.460237] system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 1.460321] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.460403] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.460491] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 1.460575] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.460657] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.460739] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.460825] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.460909] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.460992] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.461037] pnp 00:0c: [mem 0xd4c00000-0xd4c00fff]
[ 1.461086] system 00:0c: [mem 0xd4c00000-0xd4c00fff] has been reserved
[ 1.461168] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.461272] pnp 00:0d: [mem 0x20000000-0x201fffff]
[ 1.461274] pnp 00:0d: [mem 0x40000000-0x401fffff]
[ 1.461323] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[ 1.461406] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[ 1.461497] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.461517] pnp: PnP ACPI: found 14 devices
[ 1.461594] ACPI: ACPI bus type pnp unregistered
[ 1.467732] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.467813] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 1.467896] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
[ 1.467980] pci 0000:00:01.0: bridge window [mem
0xc0000000-0xd1ffffff 64bit pref]
[ 1.468093] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.468173] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
[ 1.468259] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
[ 1.468348] pci 0000:00:1c.0: bridge window [mem
0xd4200000-0xd4bfffff 64bit pref]
[ 1.468470] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.468550] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
[ 1.468635] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
[ 1.468719] pci 0000:00:1c.1: bridge window [mem
0xd3700000-0xd40fffff 64bit pref]
[ 1.469330] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 1.469412] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
[ 1.469501] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
[ 1.469586] pci 0000:00:1c.3: bridge window [mem
0xd2c00000-0xd35fffff 64bit pref]
[ 1.469702] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 1.469782] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
[ 1.469867] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
[ 1.469951] pci 0000:00:1c.5: bridge window [mem
0xd2100000-0xd2afffff 64bit pref]
[ 1.470106] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.470108] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.470110] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.470112] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.470114] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.470116] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.470118] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.470121] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 1.470123] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 1.470125] pci_bus 0000:00: resource 13 [mem 0xb0000000-0xfeafffff]
[ 1.470127] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[ 1.470129] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 1.470131] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[ 1.470133] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff
64bit pref]
[ 1.470136] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 1.470138] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
[ 1.470140] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff
64bit pref]
[ 1.470142] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.470144] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
[ 1.470147] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff
64bit pref]
[ 1.470149] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 1.470151] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
[ 1.470153] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff
64bit pref]
[ 1.470155] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
[ 1.470157] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
[ 1.470159] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff
64bit pref]
[ 1.470192] NET: Registered protocol family 2
[ 1.470453] IP route cache hash table entries: 262144 (order: 9,
2097152 bytes)
[ 1.471287] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.472675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.472887] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.472968] TCP: reno registered
[ 1.473056] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.473167] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.473336] NET: Registered protocol family 1
[ 1.473499] RPC: Registered named UNIX socket transport module.
[ 1.473580] RPC: Registered udp transport module.
[ 1.473659] RPC: Registered tcp transport module.
[ 1.473738] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.473828] pci 0000:00:02.0: Boot video device
[ 1.717379] PCI: CLS 64 bytes, default 64
[ 1.717422] Trying to unpack rootfs image as initramfs...
[ 1.751634] Freeing initrd memory: 1884k freed
[ 1.751896] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.751978] Placing 64MB software IO TLB between ffff8800a6c0d000 -
ffff8800aac0d000
[ 1.752089] software IO TLB at phys 0xa6c0d000 - 0xaac0d000
[ 1.752877] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
[ 1.752965] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753054] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753145] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753234] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753323] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753411] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753498] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x25
[ 1.753598] microcode: Microcode Update Driver: v2.00
<tigran-ppwZ4lME3+KI6QP4U9MhSdBc4/***@public.gmane.org>, Peter Oruba
[ 1.753819] audit: initializing netlink socket (disabled)
[ 1.753908] type=2000 audit(1336154188.482:1): initialized
[ 1.783355] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.784504] VFS: Disk quotas dquot_6.5.2
[ 1.784615] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.785011] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.785198] NFS: Registering the id_resolver key type
[ 1.785363] NTFS driver 2.1.30 [Flags: R/W DEBUG].
[ 1.785506] fuse init (API version 7.18)
[ 1.785695] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.786982] SGI XFS with security attributes, large block/inode
numbers, no debug enabled
[ 1.787519] Btrfs loaded
[ 1.787596] msgmni has been set to 11732
[ 1.787723] SELinux: Registering netfilter hooks
[ 1.787846] cryptomgr_test used greatest stack depth: 7168 bytes left
[ 1.787970] cryptomgr_test used greatest stack depth: 6856 bytes left
[ 1.788173] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 1.788284] io scheduler noop registered
[ 1.788362] io scheduler deadline registered
[ 1.788477] io scheduler cfq registered (default)
[ 1.788641] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.788726] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.788826] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.788925] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 1.789025] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 1.789118] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.789210] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.789291] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.789804] ALI M7101 PMU not found.
[ 1.789887] i2c-core: driver [adp8860_bl] using legacy suspend method
[ 1.789968] i2c-core: driver [adp8860_bl] using legacy resume method
[ 1.790053] i2c-core: driver [adp8870_bl] using legacy suspend method
[ 1.790159] i2c-core: driver [adp8870_bl] using legacy resume method
[ 1.790253] intel_idle: MWAIT substates: 0x21120
[ 1.790255] intel_idle: v0.4 model 0x2A
[ 1.790256] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.800263] ACPI: AC Adapter [AC0] (on-line)
[ 1.800394] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.810273] ACPI: Lid Switch [LID]
[ 1.810379] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.810494] ACPI: Sleep Button [SLPB]
[ 1.810594] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.810704] ACPI: Power Button [PWRF]
[ 1.810844] ACPI: Requesting acpi_cpufreq
[ 1.811706] modprobe used greatest stack depth: 5528 bytes left
[ 1.914473] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.914556] ACPI: Thermal Zone [THRM] (59 C)
[ 1.914674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.915159] Non-volatile memory driver v1.3
[ 1.915253] Linux agpgart interface v0.103
[ 1.915417] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.915740] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
total, 262144K mappable
[ 1.917582] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.917838] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[ 1.918025] [drm] Initialized drm 1.1.0 20060810
[ 1.918355] i915 0000:00:02.0: setting latency timer to 64
[ 1.927404] ACPI: Battery Slot [BAT0] (battery present)
[ 2.006827] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 2.006836] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.006928] [drm] Driver supports precise vblank timestamp query.
[ 2.007204] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.007318] vgaarb: transferring owner from PCI:0000:00:02.0 to
PCI:0000:01:00.0
[ 2.336525] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.425634] fbcon: inteldrmfb (fb0) is primary device
[ 2.753047] Refined TSC clocksource calibration: 2195.013 MHz.
[ 2.753056] Switching to clocksource tsc
[ 2.805895] Console: switching to colour frame buffer device 240x67
[ 2.811603] fb0: inteldrmfb frame buffer device
[ 2.811628] drm: registered panic notifier
[ 2.812645] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 2.812941] acpi device:04: registered as cooling_device8
[ 2.813022] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input3
[ 2.813075] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 2.819061] ACPI Warning: _BQC returned an invalid level (20120320/video-472)
[ 2.819369] acpi device:48: registered as cooling_device9
[ 2.819720] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.819768] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.819816] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.819870] MXM: GUID detected in BIOS
[ 2.819909] ACPI Error: Needed [Buffer/String/Package], found
[Integer] ffff8801c62b2708 (20120320/exresop-590)
[ 2.819974] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving
operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.820038] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.GFX0._DSM] (Node ffff8801c786bdc0), AE_AML_OPERAND_TYPE
(20120320/psparse-536)
[ 2.820119] failed to evaluate _DSM: 12291
[ 2.820217] ACPI Error: Needed [Buffer/String/Package], found
[Integer] ffff8801c62b2f30 (20120320/exresop-590)
[ 2.820275] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving
operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.820338] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.GFX0._DSM] (Node ffff8801c786bdc0), AE_AML_OPERAND_TYPE
(20120320/psparse-536)
[ 2.820416] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff8801c78816b8),
AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.820497] failed to evaluate _DSM: 12291
[ 2.820580] VGA switcheroo: detected Optimus DSM method
\_SB_.PCI0.PEG0.GFX0 handle
[ 2.820645] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 2.820680] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 2.820715] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.820930] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation
card (0x0c1a00a1)
[ 2.833101] vga_switcheroo: enabled
[ 2.833129] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 2.842868] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.842902] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 2.842990] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.843023] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 2.843091] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is
beyond end of region [VROM] (length 24) (20120320/exfldio-210)
[ 2.843157] ACPI Error: Method parse/execution failed
[\_SB_.PCI0.PEG0.GFX0._ROM] (Node ffff8801c78820a0),
AE_AML_REGION_LIMIT (20120320/psparse-536)
[ 2.849952] failed to evaluate ROM got AE_AML_REGION_LIMIT
[ 2.850031] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.850086] [drm] nouveau 0000:01:00.0: Checking PCIROM for VBIOS
[ 2.850286] nouveau 0000:01:00.0: Invalid ROM contents
[ 2.850390] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 2.850423] [drm] nouveau 0000:01:00.0: No valid VBIOS image found
[ 2.859146] brd: module loaded
[ 2.861508] loop: module loaded
[ 2.863406] Uniform Multi-Platform E-IDE driver
[ 2.865337] ide-gd driver 1.18
[ 2.867227] ide-cd driver 5.00
[ 2.869152] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[ 2.871049] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 2.872971] ahci 0000:00:1f.2: version 3.0
[ 2.873028] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 2.883930] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6
Gbps 0x5 impl SATA mode
[ 2.885899] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio
slum part ems apst
[ 2.887805] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.889207] scsi0 : ahci
[ 2.891147] scsi1 : ahci
[ 2.893054] scsi2 : ahci
[ 2.894938] scsi3 : ahci
[ 2.896778] scsi4 : ahci
[ 2.898566] scsi5 : ahci
[ 2.900547] ata1: SATA max UDMA/133 abar ***@0xdf006000 port
0xdf006100 irq 46
[ 2.902302] ata2: DUMMY
[ 2.904039] ata3: SATA max UDMA/133 abar ***@0xdf006000 port
0xdf006200 irq 46
[ 2.905797] ata4: DUMMY
[ 2.907514] ata5: DUMMY
[ 2.909194] ata6: DUMMY
[ 2.910950] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.912725] r8169 0000:05:00.0: irq 47 for MSI/MSI-X
[ 2.912825] r8169 0000:05:00.0: eth0: RTL8168e/8111e at
0xffffc90005d7a000, 54:04:a6:18:06:e3, XID 0c200000 IRQ 47
[ 2.914549] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200
bytes, tx checksumming: ko]
[ 2.965426] ath: EEPROM regdomain: 0x60
[ 2.965427] ath: EEPROM indicates we should expect a direct regpair map
[ 2.965430] ath: Country alpha2 being used: 00
[ 2.965431] ath: Regpair used: 0x60
[ 2.966876] ieee80211 phy0: Selected rate control algorithm
'ath9k_rate_control'
[ 2.966979] Registered led device: ath9k-phy0
[ 2.966991] ieee80211 phy0: Atheros AR9285 Rev:2
mem=0xffffc90005e20000, irq=17
[ 2.968756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.970485] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.970489] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.972188] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 1
[ 2.973887] ehci_hcd 0000:00:1a.0: broken D3 during system sleep on ASUS
[ 2.975571] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.981101] ehci_hcd 0000:00:1a.0: Enabling legacy PCI PM
[ 2.982732] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.982746] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[ 2.989789] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.991482] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.993069] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.994636] usb usb1: Product: EHCI Host Controller
[ 2.996166] usb usb1: Manufacturer: Linux 3.4.0-rc5-git+ ehci_hcd
[ 2.997673] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.999219] hub 1-0:1.0: USB hub found
[ 3.000672] hub 1-0:1.0: 2 ports detected
[ 3.002141] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.002145] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 3.003582] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 3.004975] ehci_hcd 0000:00:1d.0: broken D3 during system sleep on ASUS
[ 3.006364] ehci_hcd 0000:00:1d.0: debug port 2
[ 3.011586] ehci_hcd 0000:00:1d.0: Enabling legacy PCI PM
[ 3.012960] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 3.012974] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[ 3.019755] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.021200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.022550] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.023899] usb usb2: Product: EHCI Host Controller
[ 3.025247] usb usb2: Manufacturer: Linux 3.4.0-rc5-git+ ehci_hcd
[ 3.026605] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.028012] hub 2-0:1.0: USB hub found
[ 3.029371] hub 2-0:1.0: 2 ports detected
[ 3.030734] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.032048] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.033377] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.034675] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 3
[ 3.171680] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[ 3.173004] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.174293] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.175588] usb usb3: Product: xHCI Host Controller
[ 3.176870] usb usb3: Manufacturer: Linux 3.4.0-rc5-git+ xhci_hcd
[ 3.178169] usb usb3: SerialNumber: 0000:04:00.0
[ 3.179507] xHCI xhci_add_endpoint called for root hub
[ 3.179509] xHCI xhci_check_bandwidth called for root hub
[ 3.179526] hub 3-0:1.0: USB hub found
[ 3.180824] hub 3-0:1.0: 1 port detected
[ 3.182149] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 3.183466] xhci_hcd 0000:04:00.0: new USB bus registered, assigned
bus number 4
[ 3.184802] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.186096] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 3.187385] usb usb4: Product: xHCI Host Controller
[ 3.188657] usb usb4: Manufacturer: Linux 3.4.0-rc5-git+ xhci_hcd
[ 3.189946] usb usb4: SerialNumber: 0000:04:00.0
[ 3.191284] xHCI xhci_add_endpoint called for root hub
[ 3.191286] xHCI xhci_check_bandwidth called for root hub
[ 3.191301] hub 4-0:1.0: USB hub found
[ 3.192610] hub 4-0:1.0: 1 port detected
[ 3.203600] usbcore: registered new interface driver usblp
[ 3.204988] Initializing USB Mass Storage driver...
[ 3.206332] usbcore: registered new interface driver usb-storage
[ 3.207653] USB Mass Storage support registered.
[ 3.208975] usbcore: registered new interface driver libusual
[ 3.210293] usbcore: registered new interface driver usbserial
[ 3.211598] usbserial: USB Serial Driver core
[ 3.212945] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M]
at 0x60,0x64 irq 1,12
[ 3.215537] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.215797] i8042: Detected active multiplexing controller, rev 1.1
[ 3.216904] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.216922] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.216937] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.216949] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.216962] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.217010] mousedev: PS/2 mouse device common for all mice
[ 3.217183] usbcore: registered new interface driver xpad
[ 3.217199] rtc_cmos 00:06: RTC can wake from S4
[ 3.217312] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.217340] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.217346] i2c /dev entries driver
[ 3.217542] ACPI Warning: 0x000000000000e040-0x000000000000e05f
SystemIO conflicts with Region \SMB0 1 (20120320/utaddress-251)
[ 3.217548] ACPI Warning: 0x000000000000e040-0x000000000000e05f
SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 2
(20120320/utaddress-251)
[ 3.217552] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[ 3.217604] usbcore: registered new interface driver uvcvideo
[ 3.217605] USB Video Class driver (1.1.1)
[ 3.217614] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.217661] iTCO_wdt: Found a Cougar Point TCO device (Version=2,
TCOBASE=0x0460)
[ 3.217702] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.217704] iTCO_vendor_support: vendor-support=0
[ 3.217715] usbcore: registered new interface driver btusb
[ 3.217724] usbcore: registered new interface driver ath3k
[ 3.217852] cpuidle: using governor ladder
[ 3.248595] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.248770] cpuidle: using governor menu
[ 3.248772] EFI Variables Facility v0.08 2004-May-17
[ 3.248876] usbcore: registered new interface driver usbhid
[ 3.248877] usbhid: USB HID core driver
[ 3.248889] usbcore: registered new interface driver asus-oled
[ 3.248907] mei 0000:00:16.0: setting latency timer to 64
[ 3.248961] mei 0000:00:16.0: irq 48 for MSI/MSI-X
[ 3.254976] ashmem: initialized
[ 3.255001] logger: created 256K log 'log_main'
[ 3.255024] logger: created 256K log 'log_events'
[ 3.255046] logger: created 256K log 'log_radio'
[ 3.255067] logger: created 256K log 'log_system'
[ 3.255107] asus_wmi: ASUS WMI generic driver loaded
[ 3.255170] asus_wmi: Initialization: 0x1
[ 3.255193] asus_wmi: BIOS WMI version: 7.6
[ 3.255226] asus_wmi: SFUN value: 0x1a0877
[ 3.255684] input: Asus WMI hotkeys as
/devices/platform/asus-nb-wmi/input/input5
[ 3.262458] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input6
[ 3.288950] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 3.290349] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.290353] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3.296970] ata3.00: ATAPI: Slimtype BD E DS4E1S, EA2B, max UDMA/100
[ 3.298905] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.298917] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3.301916] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.301928] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3.303556] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.304865] ata3.00: configured for UDMA/100
[ 3.308132] ata1.00: ATA-8: ST9750420AS, 0002SDM1, max UDMA/133
[ 3.309550] ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.355810] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 3.357638] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 3.357643] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES)
filtered out
[ 3.359893] ata1.00: configured for UDMA/133
[ 3.361521] scsi 0:0:0:0: Direct-Access ATA ST9750420AS
0002 PQ: 0 ANSI: 5
[ 3.363064] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.363153] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks:
(750 GB/698 GiB)
[ 3.363156] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.363331] sd 0:0:0:0: [sda] Write Protect is off
[ 3.363334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.363425] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.374235] scsi 2:0:0:0: CD-ROM Slimtype BD E DS4E1S
EA2B PQ: 0 ANSI: 5
[ 3.380622] sr0: scsi3-mmc drive: 24x/1x writer dvd-ram cd/rw
xa/form2 cdda pop-up
[ 3.382090] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.383671] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.383805] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.413030] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 3.415275] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.420819] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.422342] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.424102] hub 1-1:1.0: USB hub found
[ 3.425681] hub 1-1:1.0: 6 ports detected
[ 3.483562] asus_wmi: Backlight controlled by ACPI video driver
[ 3.486282] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 3.529212] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.644615] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.646152] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.647859] hub 2-1:1.0: USB hub found
[ 3.649433] hub 2-1:1.0: 6 ports detected
[ 3.803993] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 3.822419] usb 3-1: New USB device found, idVendor=046d, idProduct=0a0c
[ 3.823893] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.825288] usb 3-1: Product: Logitech USB Headset
[ 3.826673] usb 3-1: Manufacturer: Logitech
[ 3.830401] input: Logitech Logitech USB Headset as
/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb3/3-1/3-1:1.3/input/input7
[ 3.831901] generic-usb 0003:046D:0A0C.0001: input,hidraw0: USB HID
v1.00 Device [Logitech Logitech USB Headset] on
usb-0000:04:00.0-1/input3
[ 3.906088] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 3.981006] usb 1-1.1: device descriptor read/64, error -32
[ 4.012941] usbcore: registered new interface driver snd-usb-audio
[ 4.014466] pktgen: Packet Generator for packet performance
testing. Version: 2.74
[ 4.017162] Netfilter messages via NETLINK v0.30.
[ 4.018669] nfnl_acct: registering with nfnetlink.
[ 4.020168] psmouse serio4: elantech: assuming hardware version 2
(with firmware version 0x040201)
[ 4.021760] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.023399] ctnetlink v0.93: registering with nfnetlink.
[ 4.025062] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 4.026594] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 4.028285] xt_time: kernel timezone is -0000
[ 4.029830] ip_set: protocol 6
[ 4.031514] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
[ 4.033099] IPVS: Connection hash table configured (size=4096,
memory=64Kbytes)
[ 4.034817] IPVS: Each connection entry needs 296 bytes at least
[ 4.034850] IPVS: Creating netns size=2088 id=0
[ 4.036448] IPVS: ipvs loaded.
[ 4.038172] IPVS: [rr] scheduler registered.
[ 4.039767] IPVS: [wrr] scheduler registered.
[ 4.041473] IPVS: [lc] scheduler registered.
[ 4.043036] IPVS: [wlc] scheduler registered.
[ 4.044712] IPVS: [lblc] scheduler registered.
[ 4.046248] IPVS: [lblcr] scheduler registered.
[ 4.047895] IPVS: [dh] scheduler registered.
[ 4.049403] IPVS: [sh] scheduler registered.
[ 4.051033] IPVS: [sed] scheduler registered.
[ 4.052524] IPVS: [nq] scheduler registered.
[ 4.054017] IPVS: ftp: loaded support on port[0] = 21
[ 4.055508] IPVS: [sip] pe registered.
[ 4.057068] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.058550] psmouse serio4: elantech: Synaptics capabilities query
result 0x78, 0x14, 0x0b.
[ 4.060157] arp_tables: (C) 2002 David S. Miller
[ 4.061656] TCP: bic registered
[ 4.063254] TCP: cubic registered
[ 4.064703] TCP: westwood registered
[ 4.066266] TCP: highspeed registered
[ 4.067691] TCP: hybla registered
[ 4.069239] TCP: htcp registered
[ 4.070651] TCP: vegas registered
[ 4.072168] TCP: veno registered
[ 4.073537] TCP: scalable registered
[ 4.075010] TCP: lp registered
[ 4.076351] TCP: yeah registered
[ 4.077804] TCP: illinois registered
[ 4.079126] Initializing XFRM netlink socket
[ 4.080654] NET: Registered protocol family 10
[ 4.082161] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.083648] IPv6 over IPv4 tunneling driver
[ 4.085076] NET: Registered protocol family 17
[ 4.086537] NET: Registered protocol family 15
[ 4.087919] Bluetooth: RFCOMM socket layer initialized
[ 4.089338] Bluetooth: RFCOMM ver 1.11
[ 4.090630] Registering the dns_resolver key type
[ 4.092045] openvswitch: Open vSwitch switching datapath
[ 4.093541] PM: Hibernation image not present or could not be loaded.
[ 4.093550] registered taskstats version 1
[ 4.095417] Magic number: 12:985:945
[ 4.096728] cpuid cpu0: hash matches
[ 4.098121] tty tty2: hash matches
[ 4.099397] cpu cpu0: hash matches
[ 4.100769] console [netcon0] enabled
[ 4.101985] netconsole: network logging started
[ 4.104820] ALSA device list:
[ 4.106107] #0: HDA Intel PCH at 0xdf000000 irq 49
[ 4.107269] #1: Logitech Logitech USB Headset at
usb-0000:04:00.0-1, full speed
[ 4.109391] Freeing unused kernel memory: 600k freed
[ 4.110670] Write protecting the kernel read-only data: 16384k
[ 4.115637] Freeing unused kernel memory: 1360k freed
[ 4.119173] Freeing unused kernel memory: 856k freed
[ 4.128613] udevd[113]: starting version 182
[ 4.160352] usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3005
[ 4.161636] usb 1-1.1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[ 4.168534] udevadm used greatest stack depth: 4224 bytes left
[ 4.174648] input: ETPS/2 Elantech Touchpad as
/devices/platform/i8042/serio4/input/input8
[ 4.236719] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 4.364009] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5122
[ 4.365243] usb 1-1.2: New USB device strings: Mfr=2, Product=1,
SerialNumber=3
[ 4.366397] usb 1-1.2: Product: USB2.0 UVC 2M WebCam
[ 4.367574] usb 1-1.2: Manufacturer: USB2.0 UVC 2M WebCam
[ 4.368749] usb 1-1.2: SerialNumber: USB2.0 UVC 2M WebCam
[ 4.372969] uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5122)
[ 4.385343] input: USB2.0 UVC 2M WebCam as
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input9
[ 4.461297] usb 2-1.4: new full-speed USB device number 3 using ehci_hcd
[ 4.550177] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c52b
[ 4.551505] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4.552767] usb 2-1.4: Product: USB Receiver
[ 4.554017] usb 2-1.4: Manufacturer: Logitech
[ 4.558636] logitech-djreceiver 0003:046D:C52B.0004:
hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on
usb-0000:00:1d.0-1.4/input2
[ 4.562127] input: Logitech Unifying Device. Wireless PID:101d as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.2/0003:046D:C52B.0004/input/input10
[ 4.563564] logitech-djdevice 0003:046D:C52B.0005: input,hidraw2:
USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101d] on
usb-0000:00:1d.0-1.4:1
[ 5.009309] EXT4-fs (sda6): mounted filesystem with ordered data
mode. Opts: (null)
[ 6.690825] udevd[191]: starting version 182
[ 8.891695] ip used greatest stack depth: 3912 bytes left
[ 9.187415] EXT4-fs (sda6): re-mounted. Opts: user_xattr
[ 9.514067] Adding 5960076k swap on /dev/sda5. Priority:-1
extents:1 across:5960076k
[ 12.590020] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.781876] r8169 0000:05:00.0: eth0: link down
[ 12.783967] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.608018] wlan0: authenticate with 00:26:44:68:e0:6f
[ 15.620155] wlan0: send auth to 00:26:44:68:e0:6f (try 1/3)
[ 15.622574] wlan0: authenticated
[ 15.629889] wlan0: associate with 00:26:44:68:e0:6f (try 1/3)
[ 15.635793] wlan0: RX AssocResp from 00:26:44:68:e0:6f (capab=0x411
status=0 aid=3)
[ 15.635802] wlan0: associated
[ 15.636541] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 22.630968] EXT4-fs (sda6): re-mounted. Opts: user_xattr,commit=0
[ 25.909620] wlan0: no IPv6 routers present
[ 43.041640] gnome-shell-cal[1079] trap int3 ip:7f89acd4c5a1
sp:7fff71e4b720 error:0
[ 128.857965] usb 3-1: USB disconnect, device number 2
[ 132.586600] usb 2-1.2: new full-speed USB device number 4 using ehci_hcd
[ 132.678979] usb 2-1.2: New USB device found, idVendor=046d, idProduct=0a0c
[ 132.678993] usb 2-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 132.679000] usb 2-1.2: Product: Logitech USB Headset
[ 132.679006] usb 2-1.2: Manufacturer: Logitech
[ 132.686244] input: Logitech Logitech USB Headset as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input11
[ 132.686366] generic-usb 0003:046D:0A0C.0006: input,hidraw0: USB HID
v1.00 Device [Logitech Logitech USB Headset] on
usb-0000:00:1d.0-1.2/input3



<< end of dmesg >>


#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.4.0-rc5 Kernel Configuration
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi
-fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9
-fcall-saved-r10 -fcall-saved-r11"
# CONFIG_KTIME_SCALAR is not set
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-git"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_FHANDLE is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y

#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_UNINLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_AMD_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_TRANSPARENT_HUGEPAGE is not set
# CONFIG_CLEANCACHE is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=y
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=y
CONFIG_TCP_CONG_HTCP=y
CONFIG_TCP_CONG_HSTCP=y
CONFIG_TCP_CONG_HYBLA=y
CONFIG_TCP_CONG_VEGAS=y
CONFIG_TCP_CONG_SCALABLE=y
CONFIG_TCP_CONG_LP=y
CONFIG_TCP_CONG_VENO=y
CONFIG_TCP_CONG_YEAH=y
CONFIG_TCP_CONG_ILLINOIS=y
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_HYBLA is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_VENO is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETWORK_PHY_TIMESTAMPING=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_NETFILTER_ADVANCED=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_ACCT=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not set
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CONNTRACK_TIMEOUT=y
CONFIG_NF_CONNTRACK_TIMESTAMP=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=y
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=y
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_BROADCAST=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_SNMP=y
CONFIG_NF_CONNTRACK_PPTP=y
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NF_CT_NETLINK_TIMEOUT=y
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y

#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=y
CONFIG_NETFILTER_XT_CONNMARK=y
CONFIG_NETFILTER_XT_SET=y

#
# Xtables targets
#
CONFIG_NETFILTER_XT_TARGET_AUDIT=y
CONFIG_NETFILTER_XT_TARGET_CHECKSUM=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=y
CONFIG_NETFILTER_XT_TARGET_CT=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_LOG=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TEE=y
# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_SECMARK=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=y
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y

#
# Xtables matches
#
CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_CPU=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DEVGROUP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ECN=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_IPVS=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_NFACCT=y
CONFIG_NETFILTER_XT_MATCH_OSF=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_IP_SET=y
CONFIG_IP_SET_MAX=256
CONFIG_IP_SET_BITMAP_IP=y
CONFIG_IP_SET_BITMAP_IPMAC=y
CONFIG_IP_SET_BITMAP_PORT=y
CONFIG_IP_SET_HASH_IP=y
CONFIG_IP_SET_HASH_IPPORT=y
CONFIG_IP_SET_HASH_IPPORTIP=y
CONFIG_IP_SET_HASH_IPPORTNET=y
CONFIG_IP_SET_HASH_NET=y
CONFIG_IP_SET_HASH_NETPORT=y
CONFIG_IP_SET_HASH_NETIFACE=y
CONFIG_IP_SET_LIST_SET=y
CONFIG_IP_VS=y
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=y
CONFIG_IP_VS_WRR=y
CONFIG_IP_VS_LC=y
CONFIG_IP_VS_WLC=y
CONFIG_IP_VS_LBLC=y
CONFIG_IP_VS_LBLCR=y
CONFIG_IP_VS_DH=y
CONFIG_IP_VS_SH=y
CONFIG_IP_VS_SED=y
CONFIG_IP_VS_NQ=y

#
# IPVS SH scheduler
#
CONFIG_IP_VS_SH_TAB_BITS=8

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=y
CONFIG_IP_VS_NFCT=y
CONFIG_IP_VS_PE_SIP=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_RPFILTER=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=y
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_SECURITY=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV6=y
CONFIG_NF_CONNTRACK_IPV6=y
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=y
CONFIG_IP6_NF_MATCH_AH=y
CONFIG_IP6_NF_MATCH_EUI64=y
CONFIG_IP6_NF_MATCH_FRAG=y
CONFIG_IP6_NF_MATCH_OPTS=y
CONFIG_IP6_NF_MATCH_HL=y
CONFIG_IP6_NF_MATCH_IPV6HEADER=y
CONFIG_IP6_NF_MATCH_MH=y
CONFIG_IP6_NF_MATCH_RPFILTER=y
CONFIG_IP6_NF_MATCH_RT=y
CONFIG_IP6_NF_TARGET_HL=y
CONFIG_IP6_NF_FILTER=y
CONFIG_IP6_NF_TARGET_REJECT=y
CONFIG_IP6_NF_MANGLE=y
CONFIG_IP6_NF_RAW=y
CONFIG_IP6_NF_SECURITY=y
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_INGRESS is not set
# CONFIG_NET_SCH_PLUG is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
# CONFIG_NET_EMATCH_CMP is not set
# CONFIG_NET_EMATCH_NBYTE is not set
# CONFIG_NET_EMATCH_U32 is not set
# CONFIG_NET_EMATCH_META is not set
# CONFIG_NET_EMATCH_TEXT is not set
CONFIG_NET_CLS_ACT=y
# CONFIG_NET_ACT_POLICE is not set
# CONFIG_NET_ACT_GACT is not set
# CONFIG_NET_ACT_MIRRED is not set
# CONFIG_NET_ACT_IPT is not set
# CONFIG_NET_ACT_NAT is not set
# CONFIG_NET_ACT_PEDIT is not set
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_ACT_CSUM is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_NETPRIO_CGROUP=y
CONFIG_BQL=y
CONFIG_HAVE_BPF_JIT=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
# CONFIG_BT_BNEP is not set
# CONFIG_BT_HIDP is not set

#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_BT_MRVL is not set
CONFIG_BT_ATH3K=y
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085 is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_SCSI_BNX2X_FCOE is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=y
CONFIG_SCSI_ISCI=y
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
CONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=y
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_IFB is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=y
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
CONFIG_REALTEK_PHY=y
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_TR is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=y
# CONFIG_ATH_DEBUG is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH5K_PCI is not set
CONFIG_ATH9K_HW=y
CONFIG_ATH9K_COMMON=y
# CONFIG_ATH9K_BTCOEX_SUPPORT is not set
CONFIG_ATH9K=y
CONFIG_ATH9K_PCI=y
CONFIG_ATH9K_AHB=y
# CONFIG_ATH9K_DEBUGFS is not set
CONFIG_ATH9K_RATE_CONTROL=y
# CONFIG_ATH9K_HTC is not set
# CONFIG_CARL9170 is not set
# CONFIG_ATH6KL is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL1251 is not set
# CONFIG_WL12XX_MENU is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=y
CONFIG_INPUT_SPARSEKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=y
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=y
# CONFIG_JOYSTICK_XPAD_FF is not set
# CONFIG_JOYSTICK_XPAD_LEDS is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
# CONFIG_STALDRV is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_RAMOOPS is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MUX=y

#
# Multiplexer I2C Chip support
#
CONFIG_I2C_MUX_GPIO=y
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
CONFIG_I2C_EG20T=y
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set

#
# Memory mapped GPIO drivers:
#
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_IT8761E is not set
CONFIG_GPIO_SCH=y
# CONFIG_GPIO_VX855 is not set

#
# I2C GPIO expanders:
#
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_ADP5588 is not set

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_ML_IOH is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MCP23S08 is not set

#
# AC97 GPIO expanders:
#

#
# MODULbus GPIO expanders:
#
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_SMB347 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_GPIO_FAN is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=y
CONFIG_ITCO_WDT=y
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=y
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_S5M_CORE is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_TIMBERDALE is not set
CONFIG_LPC_SCH=y
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA827X=y
CONFIG_MEDIA_TUNER_TDA18271=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_XC4000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF2_CORE=y
CONFIG_VIDEOBUF2_MEMOPS=y
CONFIG_VIDEOBUF2_VMALLOC=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y

#
# Audio decoders, processors and mixers
#

#
# RDS decoders
#

#
# Video decoders
#

#
# Video and audio decoders
#

#
# MPEG video encoders
#

#
# Video encoders
#

#
# Camera sensor devices
#

#
# Flash devices
#

#
# Video improvement chips
#

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_VIVI is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_PWC is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_V4L_PCI_DRIVERS is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_NOUVEAU=y
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_TMIO is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
CONFIG_BACKLIGHT_ADP8860=y
CONFIG_BACKLIGHT_ADP8870=y
# CONFIG_BACKLIGHT_LP855X is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=y
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_ENABLE_REALTEK_QUIRKS=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_DELL_NETBOOKS is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_OT200 is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
CONFIG_ASUS_OLED=y
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_VME_BUS is not set
# CONFIG_DX_SEP is not set
# CONFIG_IIO is not set
# CONFIG_ZRAM is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
CONFIG_INTEL_MEI=y
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
CONFIG_ANDROID=y
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ASHMEM=y
CONFIG_ANDROID_LOGGER=y
CONFIG_ANDROID_PERSISTENT_RAM=y
CONFIG_ANDROID_RAM_CONSOLE=y
CONFIG_ANDROID_TIMED_OUTPUT=y
CONFIG_ANDROID_TIMED_GPIO=y
CONFIG_ANDROID_LOW_MEMORY_KILLER=y
CONFIG_ANDROID_SWITCH=y
# CONFIG_ANDROID_SWITCH_GPIO is not set
# CONFIG_ANDROID_INTF_ALARM is not set
# CONFIG_PHONE is not set
# CONFIG_USB_WPAN_HCD is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
CONFIG_ASUS_LAPTOP=y
# CONFIG_DELL_WMI is not set
# CONFIG_DELL_WMI_AIO is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_AMILO_RFKILL is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_IDEAPAD_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ASUS_WMI=y
CONFIG_ASUS_NB_WMI=y
CONFIG_EEEPC_WMI=y
CONFIG_ACPI_WMI=y
# CONFIG_MSI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
CONFIG_MXM_WMI=y
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers (EXPERIMENTAL)
#

#
# Rpmsg drivers (EXPERIMENTAL)
#
CONFIG_VIRT_DRIVERS=y
# CONFIG_PM_DEVFREQ is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
CONFIG_REISERFS_CHECK=y
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
# CONFIG_REISERFS_FS_POSIX_ACL is not set
# CONFIG_REISERFS_FS_SECURITY is not set
CONFIG_JFS_FS=y
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_QUOTACTL_COMPAT=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_HARDLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_CPU_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_YAMA is not set
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_DEFAULT_SECURITY="selinux"
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VHOST_NET is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_REED_SOLOMON=y
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Sergio Correia
Hello folks,

Hi Sergio! I'm the xHCI (USB 3.0 host controller) driver maintainer.
It helps if you Cc me directly on USB 3.0 issues; otherwise it ends up
in a mail folder I check less often.

Post by Sergio Correia
when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 port,
it works normally.

Can you send the output of `sudo lspci -vvv -n`? I'd like to know which
USB 3.0 host controller you have.

Post by Sergio Correia
I am testing on 3.4.0-rc5 with
0a6ba092d1c8c75ae0c0617ef7f4e6f5043af311 as the last commit [Merge tag
'mfd-for-linus-3.4-rc6' of
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6].
I observe the same behavior with a 3.3.4 kernel.

Has the USB 2.0 headset ever not had a robotic voice under your USB 3.0
host?

Post by Sergio Correia
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset

Please run `sudo lsusb -vvv -d 046d:0a0c` with your device plugged into
the USB 3.0 port. I'm wondering if the bInterval reported in the
endpoint descriptors is incorrect, and you're getting a different
sampling rate under xHCI than EHCI.

Post by Sergio Correia
Here are two (noisy) small audio samples to illustrate the difference
between the recording if I use the USB 2.0 and 3.0 ports (no, I don't
use this mic to record music, but I thought it would illustrate the
problem heh)
USB 2.0-> http://www.uece.net/misc/usb-headset-problem/test-usb2.0.mp3
USB 3.0-> http://www.uece.net/misc/usb-headset-problem/test-usb3.0.mp3

Yes, that does sound strange. :)

Post by Sergio Correia
I am pasting my full dmesg and config below (did I miss any important
stuff there?).

Can you turn on CONFIG_USB_XHCI_HCD_DEBUGGING and CONFIG_USB_DEBUG, and
recapture dmesg when you plug in the device and start playing audio? It
may be a large log file, so you might need to put it somewhere or zip it
up.

Post by Sergio Correia
Let me know if is there any othe r useful info I could provide.

It might help to compare the USBmon output from both EHCI and xHCI, when
the device is playing. Then we could see which frames the audio was
being transferred in. There is documentation on USBmon in the kernel
source tree:

http://www.kernel.org/doc/Documentation/usb/usbmon.txt

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

On Mon, May 7, 2012 at 8:41 PM, Sarah Sharp

Post by Sergio Correia
Hello folks,

Hi Sergio! =A0I'm the xHCI (USB 3.0 host controller) driver maintaine=

r.

It helps if you Cc me directly on USB 3.0 issues; otherwise it ends u=

p

in a mail folder I check less often.

Hi Sarah, and thanks for noticing this thread! My bad, I should have
added you to CC from the beginning.

The info you requested generated rather big files, so I hosted them
somewhere else instead of attaching to this message.

Post by Sergio Correia
when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 por=

t,

Post by Sergio Correia
it works normally.

Can you send the output of `sudo lspci -vvv -n`? =A0I'd like to know =

which

USB 3.0 host controller you have.

there: http://www.uece.net/misc/usb-headset-problem/lspci.vvv.n.txt

Post by Sergio Correia
I am testing on 3.4.0-rc5 with
0a6ba092d1c8c75ae0c0617ef7f4e6f5043af311 as the last commit [Merge t=

ag

Post by Sergio Correia
'mfd-for-linus-3.4-rc6' of
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6].
I observe the same behavior with a 3.3.4 kernel.

Has the USB 2.0 headset ever not had a robotic voice under your USB 3=

=2E0

host?

It hasn't. I tried recently older kernels (3.2, 3.1 and 3.0) and they
all exhibited this same behavior.
The test succeeds on Windows, though; if I connect the headset to my
USB 3.0 host it works like the 2.0 one.

Post by Sergio Correia
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort U=

SB Headset

Please run `sudo lsusb -vvv -d 046d:0a0c` with your device plugged in=

to

the USB 3.0 port. =A0I'm wondering if the bInterval reported in the
endpoint descriptors is incorrect, and you're getting a different
sampling rate under xHCI than EHCI.

there: http://www.uece.net/misc/usb-headset-problem/lsusb.vvv.d.046d.0a=
0c.usb3.txt

Post by Sergio Correia
Here are two (noisy) small audio samples to illustrate the differenc=

e

Post by Sergio Correia
between the recording if I use the USB 2.0 and 3.0 ports (no, I don'=

t

Post by Sergio Correia
use this mic to record music, but I thought it would illustrate the
problem heh)
USB 2.0-> http://www.uece.net/misc/usb-headset-problem/test-usb2.0.m=

p3

Post by Sergio Correia
USB 3.0-> http://www.uece.net/misc/usb-headset-problem/test-usb3.0.m=

p3

Yes, that does sound strange. :)

Post by Sergio Correia
I am pasting my full dmesg =A0and config below (did I miss any impor=

tant

Post by Sergio Correia
stuff there?).

Can you turn on CONFIG_USB_XHCI_HCD_DEBUGGING and CONFIG_USB_DEBUG, a=

nd

recapture dmesg when you plug in the device and start playing audio? =

=A0It

may be a large log file, so you might need to put it somewhere or zip=

it

up.

Here's the dmesg without the device connected and when I have it
plugged and capturing audio:

http://www.uece.net/misc/usb-headset-problem/dmesg-no-device-connected-=
xhci-port.txt
http://www.uece.net/misc/usb-headset-problem/dmesg-device-connected-xhc=
i-port-recording.txt

Post by Sergio Correia
Let me know if is there any othe r useful info I could provide.

It might help to compare the USBmon output from both EHCI and xHCI, w=

hen

the device is playing. =A0Then we could see which frames the audio wa=

s

being transferred in. =A0There is documentation on USBmon in the kern=

el

http://www.kernel.org/doc/Documentation/usb/usbmon.txt

Thanks for this; I am gonna try USBmon later on tonight or tomorrow
and share the info.

Sarah Sharp

thanks for your help!
Sergio
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Hello again,

Post by Sergio Correia
On Mon, May 7, 2012 at 8:41 PM, Sarah Sharp

Post by Sergio Correia
Hello folks,

Hi Sergio! =A0I'm the xHCI (USB 3.0 host controller) driver maintain=

er.

Post by Sergio Correia

It helps if you Cc me directly on USB 3.0 issues; otherwise it ends =

up

Post by Sergio Correia

in a mail folder I check less often.

Hi Sarah, and thanks for noticing this thread! My bad, I should have
added you to CC from the beginning.
The info you requested generated rather big files, so I hosted them
somewhere else instead of attaching to this message.

Post by Sergio Correia
when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 po=

rt,

Post by Sergio Correia

Post by Sergio Correia
it works normally.

Can you send the output of `sudo lspci -vvv -n`? =A0I'd like to know=

which

Post by Sergio Correia

USB 3.0 host controller you have.

there: http://www.uece.net/misc/usb-headset-problem/lspci.vvv.n.txt

Post by Sergio Correia
I am testing on 3.4.0-rc5 with
0a6ba092d1c8c75ae0c0617ef7f4e6f5043af311 as the last commit [Merge =

tag

Post by Sergio Correia

Post by Sergio Correia
'mfd-for-linus-3.4-rc6' of
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6].
I observe the same behavior with a 3.3.4 kernel.

Has the USB 2.0 headset ever not had a robotic voice under your USB =

3.0

Post by Sergio Correia

host?

It hasn't. I tried recently older kernels (3.2, 3.1 and 3.0) and they
all exhibited this same behavior.
The test succeeds on Windows, though; if I connect the headset to my
USB 3.0 host it works like the 2.0 one.

Post by Sergio Correia
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort =

USB Headset

Post by Sergio Correia

Please run `sudo lsusb -vvv -d 046d:0a0c` with your device plugged i=

nto

Post by Sergio Correia

the USB 3.0 port. =A0I'm wondering if the bInterval reported in the
endpoint descriptors is incorrect, and you're getting a different
sampling rate under xHCI than EHCI.

there: http://www.uece.net/misc/usb-headset-problem/lsusb.vvv.d.046d.=

0a0c.usb3.txt

Post by Sergio Correia

Post by Sergio Correia
Here are two (noisy) small audio samples to illustrate the differen=

ce

Post by Sergio Correia

Post by Sergio Correia
between the recording if I use the USB 2.0 and 3.0 ports (no, I don=

't

Post by Sergio Correia

Post by Sergio Correia
use this mic to record music, but I thought it would illustrate the
problem heh)
USB 2.0-> http://www.uece.net/misc/usb-headset-problem/test-usb2.0.=

mp3

Post by Sergio Correia

Post by Sergio Correia
USB 3.0-> http://www.uece.net/misc/usb-headset-problem/test-usb3.0.=

mp3

Post by Sergio Correia

Yes, that does sound strange. :)

Post by Sergio Correia
I am pasting my full dmesg =A0and config below (did I miss any impo=

rtant

Post by Sergio Correia

Post by Sergio Correia
stuff there?).

Can you turn on CONFIG_USB_XHCI_HCD_DEBUGGING and CONFIG_USB_DEBUG, =

and

Post by Sergio Correia

recapture dmesg when you plug in the device and start playing audio?=

=A0It

Post by Sergio Correia

may be a large log file, so you might need to put it somewhere or zi=

p it

Post by Sergio Correia

up.

Here's the dmesg without the device connected and when I have it
http://www.uece.net/misc/usb-headset-problem/dmesg-no-device-connecte=

d-xhci-port.txt

Post by Sergio Correia
http://www.uece.net/misc/usb-headset-problem/dmesg-device-connected-x=

hci-port-recording.txt

Post by Sergio Correia

Post by Sergio Correia
Let me know if is there any othe r useful info I could provide.

It might help to compare the USBmon output from both EHCI and xHCI, =

when

Post by Sergio Correia

the device is playing. =A0Then we could see which frames the audio w=

as

Post by Sergio Correia

being transferred in. =A0There is documentation on USBmon in the ker=

nel

Post by Sergio Correia

http://www.kernel.org/doc/Documentation/usb/usbmon.txt

the output from USBmon for both EHCI and xHCI is available at:
http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-dev6.txt
http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-dev5.txt

I have filtered them to the specific bus/device I was interested at at
the moment.

Let me know if you need additional info.

thanks,
sergio
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sergio Correia
http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-dev6.txt
http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-dev5.txt

It's notable that the bus-2 trace (which I presume is the one using
EHCI) shows that even though each packet requested 96 bytes of data,
the device sent only 88 or 90 bytes. By contrast, the bus-3 trace
(xHCI) shows that each packet contained 96 bytes. We should expect the
two traces not to differ in this way.

This may be a bug in the xhci-hcd driver -- it may say it got more
bytes than actually were received.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Alan Stern

Post by Sergio Correia
http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-dev6.txt
http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-dev5.txt

It's notable that the bus-2 trace (which I presume is the one using
EHCI) shows that even though each packet requested 96 bytes of data,
the device sent only 88 or 90 bytes. By contrast, the bus-3 trace
(xHCI) shows that each packet contained 96 bytes. We should expect the
two traces not to differ in this way.
This may be a bug in the xhci-hcd driver -- it may say it got more
bytes than actually were received.

I actually suspect it might be a bug in the hardware itself. The lspci
shows it's a very early Fresco Logic chipset revision, and it wouldn't
surprise me if the xHCI host just doesn't report the short packet
completion code. Let's rule that out before I go digging around the
xHCI ring code (which looks like it's handling short packets properly,
BTW).

Sergio, can you apply the attached patch, and see if the host is
actually reporting short packets?

Sarah Sharp

[Sergio Correia]

Hi,

On Tue, May 8, 2012 at 12:25 PM, Sarah Sharp

Post by Alan Stern

http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-dev6=

=2Etxt

Post by Alan Stern

http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-dev5=

=2Etxt

Post by Alan Stern
It's notable that the bus-2 trace (which I presume is the one using
EHCI) shows that even though each packet requested 96 bytes of data,
the device sent only 88 or 90 bytes. =A0By contrast, the bus-3 trace
(xHCI) shows that each packet contained 96 bytes. =A0We should expec=

t the

Post by Alan Stern
two traces not to differ in this way.
This may be a bug in the xhci-hcd driver -- it may say it got more
bytes than actually were received.

I actually suspect it might be a bug in the hardware itself. =A0The l=

spci

shows it's a very early Fresco Logic chipset revision, and it wouldn'=

t

surprise me if the xHCI host just doesn't report the short packet
completion code. =A0Let's rule that out before I go digging around th=

e

xHCI ring code (which looks like it's handling short packets properly=

,

BTW).
Sergio, can you apply the attached patch, and see if the host is
actually reporting short packets?

the dmesg is there:
http://www.uece.net/misc/usb-headset-problem/dmesg-short-packet-complet=
ion-code.bz2
it was too large, so I bzip'ed it.

sergio

Sarah Sharp

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Sergio Correia
Hi,
On Tue, May 8, 2012 at 12:25 PM, Sarah Sharp

Post by Alan Stern

Post by Sergio Correia
http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-dev6.txt
http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-dev5.txt

It's notable that the bus-2 trace (which I presume is the one using
EHCI) shows that even though each packet requested 96 bytes of data,
the device sent only 88 or 90 bytes.  By contrast, the bus-3 trace
(xHCI) shows that each packet contained 96 bytes.  We should expect the
two traces not to differ in this way.
This may be a bug in the xhci-hcd driver -- it may say it got more
bytes than actually were received.

I actually suspect it might be a bug in the hardware itself.  The lspci
shows it's a very early Fresco Logic chipset revision, and it wouldn't
surprise me if the xHCI host just doesn't report the short packet
completion code.  Let's rule that out before I go digging around the
xHCI ring code (which looks like it's handling short packets properly,
BTW).
Sergio, can you apply the attached patch, and see if the host is
actually reporting short packets?

http://www.uece.net/misc/usb-headset-problem/dmesg-short-packet-completion-code.bz2
it was too large, so I bzip'ed it.

Yeah, it looks like the Fresco Logic host controller is reporting a
successful completion status, with an untransferred length of 8 bytes,
which is a contradiction. Since we can tell from the EHCI logs that it
actually should be reporting a short packet status, I think we should be
able to just add a quirk for it, to trust the untransferred length.

I wonder if this is just for short control transfers, or if they have
this bug for other endpoint types?

Please revert the last patch, apply the next patch, and see if the audio
sounds any better.

How did you get access to this xHCI host controller? AFAIK, it was a
short run chip that Fresco Logic did just for the USB-IF PDK, back in
2008. Is it an off-the-shelf add-in card, or integrated in some system?

Sarah Sharp

[Sarah Sharp]

Post by Sarah Sharp
Yeah, it looks like the Fresco Logic host controller is reporting a
successful completion status, with an untransferred length of 8 bytes,
which is a contradiction. Since we can tell from the EHCI logs that it
actually should be reporting a short packet status, I think we should be
able to just add a quirk for it, to trust the untransferred length.
I wonder if this is just for short control transfers, or if they have
this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control transfers.

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sarah Sharp

Post by Sarah Sharp
Yeah, it looks like the Fresco Logic host controller is reporting a
successful completion status, with an untransferred length of 8 bytes,
which is a contradiction. Since we can tell from the EHCI logs that it
actually should be reporting a short packet status, I think we should be
able to just add a quirk for it, to trust the untransferred length.
I wonder if this is just for short control transfers, or if they have
this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control transfers.

It should be easy enough to find out, by plugging in a USB drive. Most
of them generate short bulk transfers during SCSI initialization.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Hi Alan, Sarah,

Yeah, it looks like the Fresco Logic host controller is reporting =

a

successful completion status, with an untransferred length of 8 by=

tes,

which is a contradiction. =A0Since we can tell from the EHCI logs =

that it

actually should be reporting a short packet status, I think we sho=

uld be

able to just add a quirk for it, to trust the untransferred length=

=2E

I wonder if this is just for short control transfers, or if they h=

ave

this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control transfe=

rs.

It should be easy enough to find out, by plugging in a USB drive. =A0=

Most

of them generate short bulk transfers during SCSI initialization.
Alan Stern

I have an external USB 2.0 disk and also a USB 2.0 drive handy. Shall
I try the 1st patch (short packet completion debugging) with them on
the USB 3.0 port to check if it reports something else strange?
Sergio
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sergio Correia
Hi Alan, Sarah,
=20

Yeah, it looks like the Fresco Logic host controller is reportin=

g a

Post by Sergio Correia

successful completion status, with an untransferred length of 8 =

bytes,

Post by Sergio Correia

which is a contradiction. =A0Since we can tell from the EHCI log=

s that it

Post by Sergio Correia

actually should be reporting a short packet status, I think we s=

hould be

Post by Sergio Correia

able to just add a quirk for it, to trust the untransferred leng=

th.

Post by Sergio Correia

I wonder if this is just for short control transfers, or if they=

have

Post by Sergio Correia

this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control trans=

fers.

Post by Sergio Correia

It should be easy enough to find out, by plugging in a USB drive. =A0=

Most

Post by Sergio Correia

of them generate short bulk transfers during SCSI initialization.
Alan Stern

=20
I have an external USB 2.0 disk and also a USB 2.0 drive handy. Shall
I try the 1st patch (short packet completion debugging) with them on
the USB 3.0 port to check if it reports something else strange?

Go ahead.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Post by Alan Stern

Post by Sergio Correia
Hi Alan, Sarah,

Yeah, it looks like the Fresco Logic host controller is reporti=

ng a

Post by Alan Stern

Post by Sergio Correia

successful completion status, with an untransferred length of 8=

bytes,

Post by Alan Stern

Post by Sergio Correia

which is a contradiction. =A0Since we can tell from the EHCI lo=

gs that it

Post by Alan Stern

Post by Sergio Correia

actually should be reporting a short packet status, I think we =

should be

Post by Alan Stern

Post by Sergio Correia

able to just add a quirk for it, to trust the untransferred len=

gth.

Post by Alan Stern

Post by Sergio Correia

I wonder if this is just for short control transfers, or if the=

y have

Post by Alan Stern

Post by Sergio Correia

this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control tran=

sfers.

Post by Alan Stern

Post by Sergio Correia

It should be easy enough to find out, by plugging in a USB drive. =

=A0Most

Post by Alan Stern

Post by Sergio Correia

of them generate short bulk transfers during SCSI initialization.
Alan Stern

I have an external USB 2.0 disk and also a USB 2.0 drive handy. Shal=

l

Post by Alan Stern

Post by Sergio Correia
I try the 1st patch (short packet completion debugging) with them on
the USB 3.0 port to check if it reports something else strange?

Go ahead.

the dmesg outputs are there:
http://www.uece.net/misc/usb-headset-problem/dmesg-wd-2tb-disk-usb2.0
http://www.uece.net/misc/usb-headset-problem/dmesg-kingston-8gb-drive-u=
sb2.0

thanks,
sergio

Post by Alan Stern
Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia
Hi Alan, Sarah,

Yeah, it looks like the Fresco Logic host controller is repor=

ting a

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

successful completion status, with an untransferred length of=

8 bytes,

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

which is a contradiction. =A0Since we can tell from the EHCI =

logs that it

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

actually should be reporting a short packet status, I think w=

e should be

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

able to just add a quirk for it, to trust the untransferred l=

ength.

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

I wonder if this is just for short control transfers, or if t=

hey have

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

this bug for other endpoint types?

Er, I meant "short isochronous transfers", not short control tr=

ansfers.

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

It should be easy enough to find out, by plugging in a USB drive=

=2E =A0Most

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

of them generate short bulk transfers during SCSI initialization=

=2E

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia

Alan Stern

I have an external USB 2.0 disk and also a USB 2.0 drive handy. Sh=

all

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia
I try the 1st patch (short packet completion debugging) with them =

on

Post by Sergio Correia

Post by Alan Stern

Post by Sergio Correia
the USB 3.0 port to check if it reports something else strange?

Go ahead.

=20
http://www.uece.net/misc/usb-headset-problem/dmesg-wd-2tb-disk-usb2.0
http://www.uece.net/misc/usb-headset-problem/dmesg-kingston-8gb-drive=

-usb2.0

It looks like the Fresco Logic host controller is correctly reporting
short transfers for bulk endpoints, just not isochronous endpoints.

Alan, do you know which USB devices might have interrupt IN endpoints
that are likely to send short packets?

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sarah Sharp
It looks like the Fresco Logic host controller is correctly reporting
short transfers for bulk endpoints, just not isochronous endpoints.
Alan, do you know which USB devices might have interrupt IN endpoints
that are likely to send short packets?

I can't think of any common examples.

Anyway, I just checked the xHCI spec. As far as I can see, it doesn't
directly require that a transfer TRB's completion code be set to Short
Packet when the ISP flag isn't set. So it may be a mistake to rely on
that -- presumably you don't set ISP for ischronous transfers.

On the other hand, the spec does say that if IOC is set then the
resulting Transfer Event TRB will have its completion code set to Short
Packet. And it also says that the completion code of the Transfer
Event TRB will be the same as the completion status of the originating
TRB. But this wouldn't apply to TDs before the last in an isochronous
transfer.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Alan Stern

Post by Sarah Sharp
It looks like the Fresco Logic host controller is correctly reporting
short transfers for bulk endpoints, just not isochronous endpoints.
Alan, do you know which USB devices might have interrupt IN endpoints
that are likely to send short packets?

I can't think of any common examples.
Anyway, I just checked the xHCI spec. As far as I can see, it doesn't
directly require that a transfer TRB's completion code be set to Short
Packet when the ISP flag isn't set. So it may be a mistake to rely on
that -- presumably you don't set ISP for ischronous transfers.

The xHCI driver does set ISP for all TRBs for an isochronous IN
endpoint, see drivers/usb/host/xhci-ring.c:xhci_queue_isoc_tx()

/* Only set interrupt on short packet for IN EPs */
if (usb_urb_dir_in(urb))
field |= TRB_ISP;

Otherwise we won't get an event when a short packet occurs. Since we
set ISP on all isoc TRBs, the host should have set the completion code
to Short Packet.

Post by Alan Stern
On the other hand, the spec does say that if IOC is set then the
resulting Transfer Event TRB will have its completion code set to Short
Packet. And it also says that the completion code of the Transfer
Event TRB will be the same as the completion status of the originating
TRB. But this wouldn't apply to TDs before the last in an isochronous
transfer.

The IOC flag is set for the last TRB of every TD that comprises the
entire isochronous URB frame list. We need an event on the event ring
for each TD in the frame list, which is why we need IOC set. However,
we set the BEI flag (Block Event Interrupt) for xHCI 1.0 hosts. That
means xHCI 1.0 hosts will place the event for each TD on the event ring,
but it won't generate an interrupt until the event for the last TD in
the URB frame list is placed on the event ring.

Basically, I still think the Fresco Logic host is broken. :)

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sarah Sharp

Post by Alan Stern
Anyway, I just checked the xHCI spec. As far as I can see, it doesn't
directly require that a transfer TRB's completion code be set to Short
Packet when the ISP flag isn't set. So it may be a mistake to rely on
that -- presumably you don't set ISP for ischronous transfers.

The xHCI driver does set ISP for all TRBs for an isochronous IN
endpoint, see drivers/usb/host/xhci-ring.c:xhci_queue_isoc_tx()
/* Only set interrupt on short packet for IN EPs */
if (usb_urb_dir_in(urb))
field |= TRB_ISP;
Otherwise we won't get an event when a short packet occurs. Since we
set ISP on all isoc TRBs, the host should have set the completion code
to Short Packet.

Okay. Why do you care about short packets on isochronous transfers? I
wouldn't think they make any difference.

Post by Sarah Sharp
Basically, I still think the Fresco Logic host is broken. :)

Sounds like it.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Andiry Xu]

Post by Alan Stern

Post by Sarah Sharp

Post by Alan Stern
Anyway, I just checked the xHCI spec. As far as I can see, it doesn't
directly require that a transfer TRB's completion code be set to Short
Packet when the ISP flag isn't set. So it may be a mistake to rely on
that -- presumably you don't set ISP for ischronous transfers.

The xHCI driver does set ISP for all TRBs for an isochronous IN
endpoint, see drivers/usb/host/xhci-ring.c:xhci_queue_isoc_tx()
/* Only set interrupt on short packet for IN EPs */
if (usb_urb_dir_in(urb))
field |= TRB_ISP;
Otherwise we won't get an event when a short packet occurs. Since we
set ISP on all isoc TRBs, the host should have set the completion code
to Short Packet.

Okay. Why do you care about short packets on isochronous transfers? I
wouldn't think they make any difference.

If we do not set ISP for ISOC IN transfers, there is no event produced
when a short packet occurs and the driver cannot update the status and
length field of iso_packet_descriptor accordingly.

Thanks,
Andiry

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Andiry Xu

Post by Alan Stern
Okay. Why do you care about short packets on isochronous transfers? I
wouldn't think they make any difference.

If we do not set ISP for ISOC IN transfers, there is no event produced
when a short packet occurs and the driver cannot update the status and
length field of iso_packet_descriptor accordingly.

You are begging the question. Why do you care if there is no event
produced when a short packet occurs? After all, there is no event when
a full-sized packet occurs; what's special about short packets?

As for the iso_packet_descriptor status field... Surely that is
already being updated. Otherwise it would always contain -EINPROGRESS,
because that's what it gets set to when URBs are submitted.

Much the same is true for the length field. In fact, you must really
mean the actual_length field, because the length field does not get
updated. Besides, doesn't Sarah's most recent patch set the
actual_length field correctly when a short packet occurs?

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Post by Alan Stern

Post by Andiry Xu

Post by Alan Stern
Okay. Why do you care about short packets on isochronous transfers? I
wouldn't think they make any difference.

If we do not set ISP for ISOC IN transfers, there is no event produced
when a short packet occurs and the driver cannot update the status and
length field of iso_packet_descriptor accordingly.

You are begging the question. Why do you care if there is no event
produced when a short packet occurs? After all, there is no event when
a full-sized packet occurs; what's special about short packets?
As for the iso_packet_descriptor status field... Surely that is
already being updated. Otherwise it would always contain -EINPROGRESS,
because that's what it gets set to when URBs are submitted.

When we get an event for the last TD in an isochronous URB, we go
through the frame list and mark any iso_packet_descriptor status field
as successful that was between the last TD that generated an event and
the last TD in the frame list. So if we don't get an event that tells
us a short packet occurred on a TD somewhere in the middle of the frame
list, we will mark it as successful, and the driver will consume random
bytes.

If we get a "Missed Service" completion code, meaning some TDs on the
isochronous ring were skipped, we mark each TD with an error status
until we get to a TD that successfully completed.

Post by Alan Stern
Much the same is true for the length field. In fact, you must really
mean the actual_length field, because the length field does not get
updated. Besides, doesn't Sarah's most recent patch set the
actual_length field correctly when a short packet occurs?

The actual_length field in the event TRB is only for the last TD in the
frame list. It is not an accumulation of all the lengths in the frame
list. The xHC hardware has no idea where the frame list for an URB ends
or begins. It only sees that one TRB in a number of TDs has the IOC
flag set, and so it will only generate an event for that TD. So we need
to know if anything bad happened (including a short packet) for the
other TDs in the frame list.

My patch only changes the completion status, not the actual_length
field. It actually doesn't touch the hardware's event TRB at all, it
just modifies a local copy of the completion status from the event TRB.

Sarah Sharp
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Alan Stern]

Post by Sarah Sharp

Post by Alan Stern

Post by Andiry Xu

Post by Alan Stern
Okay. Why do you care about short packets on isochronous transfers? I
wouldn't think they make any difference.

If we do not set ISP for ISOC IN transfers, there is no event produced
when a short packet occurs and the driver cannot update the status and
length field of iso_packet_descriptor accordingly.

You are begging the question. Why do you care if there is no event
produced when a short packet occurs? After all, there is no event when
a full-sized packet occurs; what's special about short packets?
As for the iso_packet_descriptor status field... Surely that is
already being updated. Otherwise it would always contain -EINPROGRESS,
because that's what it gets set to when URBs are submitted.

When we get an event for the last TD in an isochronous URB, we go
through the frame list and mark any iso_packet_descriptor status field
as successful that was between the last TD that generated an event and
the last TD in the frame list. So if we don't get an event that tells
us a short packet occurred on a TD somewhere in the middle of the frame
list, we will mark it as successful, and the driver will consume random
bytes.

Well, this is just a choice of driver implementation. Obviously it's
entirely up to you. I will merely point out that instead of marking
all those status fields as successful, you could mark each of them with
whatever status code is appropriate.

As for whether the driver consumes random bytes, that doesn't depend on
the status -- it depends on the actual_length field.

It's also worth mentioning that none of uhci-hcd, ohci-hcd, or ehci-hcd
bother to set the iso_packet_descriptor status to -EREMOTEIO when a
short packet is received. There's even a comment about it in
ohci-q.c:td_done():

/* short reads are always OK for ISO */
if (cc == TD_DATAUNDERRUN)
cc = TD_CC_NOERROR;

usb_hcd_giveback_urb() will in any case automatically set the URB's
status to -EREMOTEIO if the status is 0, URB_SHORT_NOT_OK is set, and
urb->actual_length is less than urb->transfer_buffer_length. But for
isochronous transfers this is basically irrelevant, because they are
unreliable by definition.

Post by Sarah Sharp

Post by Alan Stern
Much the same is true for the length field. In fact, you must really
mean the actual_length field, because the length field does not get
updated. Besides, doesn't Sarah's most recent patch set the
actual_length field correctly when a short packet occurs?

The actual_length field in the event TRB is only for the last TD in the
frame list. It is not an accumulation of all the lengths in the frame
list. The xHC hardware has no idea where the frame list for an URB ends
or begins. It only sees that one TRB in a number of TDs has the IOC
flag set, and so it will only generate an event for that TD. So we need
to know if anything bad happened (including a short packet) for the
other TDs in the frame list.

The main point I'm trying to make is that you don't really need an
event to be generated whenever a short packet is received. You could
handle short packets and full-sized ones the same -- just add up the
number of bytes actually transferred. Full-sized packets don't
generate events (except for the last one in an URB), so short packets
shouldn't need to either.

The secondary point is that short packets in isochronous transfers
aren't "bad".

Post by Sarah Sharp
My patch only changes the completion status, not the actual_length
field. It actually doesn't touch the hardware's event TRB at all, it
just modifies a local copy of the completion status from the event TRB.

That same completion status is available in the transfer TRB, right?
Which suggests the event TRB is unnecessary.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Hello Sarah,

On Tue, May 8, 2012 at 6:26 PM, Sarah Sharp

Post by Sarah Sharp

Post by Sergio Correia
Hi,
On Tue, May 8, 2012 at 12:25 PM, Sarah Sharp

http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-d=

ev6.txt

Post by Sarah Sharp

Post by Sergio Correia

http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-d=

ev5.txt

Post by Sarah Sharp

Post by Sergio Correia

It's notable that the bus-2 trace (which I presume is the one usi=

ng

Post by Sarah Sharp

Post by Sergio Correia

EHCI) shows that even though each packet requested 96 bytes of da=

ta,

Post by Sarah Sharp

Post by Sergio Correia

the device sent only 88 or 90 bytes. =A0By contrast, the bus-3 tr=

ace

Post by Sarah Sharp

Post by Sergio Correia

(xHCI) shows that each packet contained 96 bytes. =A0We should ex=

pect the

Post by Sarah Sharp

Post by Sergio Correia

two traces not to differ in this way.
This may be a bug in the xhci-hcd driver -- it may say it got mor=

e

Post by Sarah Sharp

Post by Sergio Correia

bytes than actually were received.

I actually suspect it might be a bug in the hardware itself. =A0Th=

e lspci

Post by Sarah Sharp

Post by Sergio Correia

shows it's a very early Fresco Logic chipset revision, and it woul=

dn't

Post by Sarah Sharp

Post by Sergio Correia

surprise me if the xHCI host just doesn't report the short packet
completion code. =A0Let's rule that out before I go digging around=

the

Post by Sarah Sharp

Post by Sergio Correia

xHCI ring code (which looks like it's handling short packets prope=

rly,

Post by Sarah Sharp

Post by Sergio Correia

BTW).
Sergio, can you apply the attached patch, and see if the host is
actually reporting short packets?

http://www.uece.net/misc/usb-headset-problem/dmesg-short-packet-comp=

letion-code.bz2

Post by Sarah Sharp

Post by Sergio Correia
it was too large, so I bzip'ed it.

Yeah, it looks like the Fresco Logic host controller is reporting a
successful completion status, with an untransferred length of 8 bytes=

,

Post by Sarah Sharp
which is a contradiction. =A0Since we can tell from the EHCI logs tha=

t it

Post by Sarah Sharp
actually should be reporting a short packet status, I think we should=

be

Post by Sarah Sharp
able to just add a quirk for it, to trust the untransferred length.
I wonder if this is just for short control transfers, or if they have
this bug for other endpoint types?
Please revert the last patch, apply the next patch, and see if the au=

dio

Post by Sarah Sharp
sounds any better.

The compilation fails with the following error:

drivers/usb/host/xhci-pci.c: In function =91xhci_pci_quirks=92:
drivers/usb/host/xhci-pci.c:75:19: error: =91XHCI_CHECK_SUCCESS=92
undeclared (first use in this function)
drivers/usb/host/xhci-pci.c:75:19: note: each undeclared identifier is
reported only once for each function it appears in
make[3]: *** [drivers/usb/host/xhci-pci.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

Post by Sarah Sharp
How did you get access to this xHCI host controller? =A0AFAIK, it was=

a

Post by Sarah Sharp
short run chip that Fresco Logic did just for the USB-IF PDK, back in
2008. =A0Is it an off-the-shelf add-in card, or integrated in some sy=

stem?
Ouch. It came with the ASUS N53SV-DH72 laptop I got this March.

sergio

Post by Sarah Sharp
Sarah Sharp

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Post by Sergio Correia
Hello Sarah,
On Tue, May 8, 2012 at 6:26 PM, Sarah Sharp

Post by Sarah Sharp

Post by Sergio Correia
Hi,
On Tue, May 8, 2012 at 12:25 PM, Sarah Sharp

http://www.uece.net/misc/usb-headset-problem/usbmon-usb2-bus2-=

dev6.txt

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

http://www.uece.net/misc/usb-headset-problem/usbmon-usb3-bus3-=

dev5.txt

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

It's notable that the bus-2 trace (which I presume is the one us=

ing

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

EHCI) shows that even though each packet requested 96 bytes of d=

ata,

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

the device sent only 88 or 90 bytes. =A0By contrast, the bus-3 t=

race

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

(xHCI) shows that each packet contained 96 bytes. =A0We should e=

xpect the

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

two traces not to differ in this way.
This may be a bug in the xhci-hcd driver -- it may say it got mo=

re

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

bytes than actually were received.

I actually suspect it might be a bug in the hardware itself. =A0T=

he lspci

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

shows it's a very early Fresco Logic chipset revision, and it wou=

ldn't

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

surprise me if the xHCI host just doesn't report the short packet
completion code. =A0Let's rule that out before I go digging aroun=

d the

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

xHCI ring code (which looks like it's handling short packets prop=

erly,

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia

BTW).
Sergio, can you apply the attached patch, and see if the host is
actually reporting short packets?

http://www.uece.net/misc/usb-headset-problem/dmesg-short-packet-com=

pletion-code.bz2

Post by Sergio Correia

Post by Sarah Sharp

Post by Sergio Correia
it was too large, so I bzip'ed it.

Yeah, it looks like the Fresco Logic host controller is reporting a
successful completion status, with an untransferred length of 8 byte=

s,

Post by Sergio Correia

Post by Sarah Sharp
which is a contradiction. =A0Since we can tell from the EHCI logs th=

at it

Post by Sergio Correia

Post by Sarah Sharp
actually should be reporting a short packet status, I think we shoul=

d be

Post by Sergio Correia

Post by Sarah Sharp
able to just add a quirk for it, to trust the untransferred length.
I wonder if this is just for short control transfers, or if they hav=

e

Post by Sergio Correia

Post by Sarah Sharp
this bug for other endpoint types?
Please revert the last patch, apply the next patch, and see if the a=

udio

Post by Sergio Correia

Post by Sarah Sharp
sounds any better.

drivers/usb/host/xhci-pci.c:75:19: error: =91XHCI_CHECK_SUCCESS=92
undeclared (first use in this function)
drivers/usb/host/xhci-pci.c:75:19: note: each undeclared identifier i=

s

Post by Sergio Correia
reported only once for each function it appears in
make[3]: *** [drivers/usb/host/xhci-pci.o] Error 1
make[2]: *** [drivers/usb/host] Error 2
make[1]: *** [drivers/usb] Error 2
make: *** [drivers] Error 2

I replaced with XHCI_TRUST_TX_LENGTH and it compiled fine. I am
testing now and it seems to be working as well (audio sounds OK to
me).
The new usbmon trace is here:
http://www.uece.net/misc/usb-headset-problem/usbmon-xhci-patch-applied.=
txt
And here an audio sample with the patch applied:
http://www.uece.net/misc/usb-headset-problem/test-usb3.0-patch-applied.=
mp3

thanks for your help!
sergio

Post by Sergio Correia

Post by Sarah Sharp
How did you get access to this xHCI host controller? =A0AFAIK, it wa=

s a

Post by Sergio Correia

Post by Sarah Sharp
short run chip that Fresco Logic did just for the USB-IF PDK, back i=

n

Post by Sergio Correia

Post by Sarah Sharp
2008. =A0Is it an off-the-shelf add-in card, or integrated in some s=

ystem?

Post by Sergio Correia
Ouch. It came with the ASUS N53SV-DH72 laptop I got this March.
sergio

Post by Sarah Sharp
Sarah Sharp

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sarah Sharp]

Sergio reported that when he recorded audio from a USB headset mic
plugged into the USB 3.0 port on his ASUS N53SV-DH72, the audio sounded
"robotic". When plugged into the USB 2.0 port under EHCI on the same
laptop, the audio sounded fine. The device is:

Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort USB Headset

The problem was tracked down to the Fresco Logic xHCI host controller
not correctly reporting short transfers on isochronous IN endpoints.
The driver would submit a 96 byte transfer, the device would only send
88 or 90 bytes, and the xHCI host would report the transfer had a
"successful" completion code, with an untransferred buffer length of 8
or 6 bytes.

The successful completion code and non-zero untransferred length is a
contradiction. The xHCI host is supposed to only mark a transfer as
successful if all the bytes are transferred. Otherwise, the transfer
should be marked with a short packet completion code. Without the EHCI
bus trace, we wouldn't know whether the xHCI driver should trust the
completion code or the untransferred length. With it, we know to trust
the untransferred length.

Add a new xHCI quirk for the Fresco Logic host controller. If a
transfer is reported as successful, but the untransferred length is
non-zero, print a warning. For the Fresco Logic host, change the
completion code to COMP_SHORT_TX and process the transfer like a short
transfer.

This should be backported to stable kernels that contain the commit
f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some
Fresco Logic hosts." That commit was marked for stable kernels as old
as 2.6.36.

Signed-off-by: Sarah Sharp <sarah.a.sharp-VuQAYsv1563Yd54FQh9/***@public.gmane.org>
Reported-by: Sergio Correia <lists-ww/***@public.gmane.org>
Tested-by: Sergio Correia <lists-ww/***@public.gmane.org>
Cc: stable-***@public.gmane.org
Signed-off-by: Sarah Sharp <sarah.a.sharp-VuQAYsv1563Yd54FQh9/***@public.gmane.org>
---

Hi Sergio,

Can you double check that this patch works for you? If so, I'll send it
off to Greg KH for the 3.5 merge window.

Also, I figured out the buggy Fresco Logic chipset I was thinking of was
rev 0x0, not rev 0x4, so I don't think you have a pre-release xHCI
chipset.

Let me know if you find any other issues under this host controller.
This chipset is known to have several different quirks, and I'm not sure
we handle them all in Linux.

Sarah Sharp

drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-ring.c | 20 +++++++++++++++++---
drivers/usb/host/xhci.h | 1 +
3 files changed, 19 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 7a856a7..19e8921 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
"has broken MSI implementation\n",
pdev->revision);
+ xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}

if (pdev->vendor == PCI_VENDOR_ID_NEC)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 3d9422f..951a9c3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1786,8 +1786,12 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
/* handle completion code */
switch (trb_comp_code) {
case COMP_SUCCESS:
- frame->status = 0;
- break;
+ if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0) {
+ frame->status = 0;
+ break;
+ }
+ if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+ trb_comp_code = COMP_SHORT_TX;
case COMP_SHORT_TX:
frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
-EREMOTEIO : 0;
@@ -1883,13 +1887,16 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
switch (trb_comp_code) {
case COMP_SUCCESS:
/* Double check that the HW transferred everything. */
- if (event_trb != td->last_trb) {
+ if (event_trb != td->last_trb ||
+ TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
xhci_warn(xhci, "WARN Successful completion "
"on short TX\n");
if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
*status = -EREMOTEIO;
else
*status = 0;
+ if ((xhci->quirks & XHCI_TRUST_TX_LENGTH))
+ trb_comp_code = COMP_SHORT_TX;
} else {
*status = 0;
}
@@ -2048,6 +2055,13 @@ static int handle_tx_event(struct xhci_hcd *xhci,
* transfer type
*/
case COMP_SUCCESS:
+ if (TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
+ break;
+ if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
+ trb_comp_code = COMP_SHORT_TX;
+ else
+ xhci_warn(xhci, "WARN Successful completion on short TX: "
+ "needs XHCI_TRUST_TX_LENGTH quirk?\n");
case COMP_SHORT_TX:
break;
case COMP_STOP:
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3d69c4b..abfb321 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1479,6 +1479,7 @@ struct xhci_hcd {
#define XHCI_RESET_ON_RESUME (1 << 7)
#define XHCI_SW_BW_CHECKING (1 << 8)
#define XHCI_AMD_0x96_HOST (1 << 9)
+#define XHCI_TRUST_TX_LENGTH (1 << 10)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */

[Sergio Correia]

Hello Sarah,

On Wed, May 9, 2012 at 11:54 AM, Sarah Sharp

Post by Sarah Sharp
Sergio reported that when he recorded audio from a USB headset mic
plugged into the USB 3.0 port on his ASUS N53SV-DH72, the audio sound=

ed

Post by Sarah Sharp
"robotic". =A0When plugged into the USB 2.0 port under EHCI on the sa=

me

Post by Sarah Sharp
Bus 002 Device 004: ID 046d:0a0c Logitech, Inc. Clear Chat Comfort US=

B Headset

Post by Sarah Sharp
The problem was tracked down to the Fresco Logic xHCI host controller
not correctly reporting short transfers on isochronous IN endpoints.
The driver would submit a 96 byte transfer, the device would only sen=

d

Post by Sarah Sharp
88 or 90 bytes, and the xHCI host would report the transfer had a
"successful" completion code, with an untransferred buffer length of =

8

Post by Sarah Sharp
or 6 bytes.
The successful completion code and non-zero untransferred length is a
contradiction. =A0The xHCI host is supposed to only mark a transfer a=

s

Post by Sarah Sharp
successful if all the bytes are transferred. =A0Otherwise, the transf=

er

Post by Sarah Sharp
should be marked with a short packet completion code. =A0Without the =

EHCI

Post by Sarah Sharp
bus trace, we wouldn't know whether the xHCI driver should trust the
completion code or the untransferred length. =A0With it, we know to t=

rust

Post by Sarah Sharp
the untransferred length.
Add a new xHCI quirk for the Fresco Logic host controller. =A0If a
transfer is reported as successful, but the untransferred length is
non-zero, print a warning. =A0For the Fresco Logic host, change the
completion code to COMP_SHORT_TX and process the transfer like a shor=

t

Post by Sarah Sharp
transfer.
This should be backported to stable kernels that contain the commit
f5182b4155b9d686c5540a6822486400e34ddd98 "xhci: Disable MSI for some
Fresco Logic hosts." =A0That commit was marked for stable kernels as =

old

Post by Sarah Sharp
as 2.6.36.
---
Hi Sergio,
Can you double check that this patch works for you? =A0If so, I'll se=

nd it

Post by Sarah Sharp
off to Greg KH for the 3.5 merge window.

Double-tested, with this patch applied it works as it should. Thanks
again for your help!

Post by Sarah Sharp
Also, I figured out the buggy Fresco Logic chipset I was thinking of =

was

Post by Sarah Sharp
rev 0x0, not rev 0x4, so I don't think you have a pre-release xHCI
chipset.

Glad to hear :)

Post by Sarah Sharp
Let me know if you find any other issues under this host controller.
This chipset is known to have several different quirks, and I'm not s=

ure

Post by Sarah Sharp
we handle them all in Linux.

I sure will, thanks again.
Sergio

Post by Sarah Sharp
Sarah Sharp
=A0drivers/usb/host/xhci-pci.c =A0| =A0 =A01 +
=A0drivers/usb/host/xhci-ring.c | =A0 20 +++++++++++++++++---
=A0drivers/usb/host/xhci.h =A0 =A0 =A0| =A0 =A01 +
=A03 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.=

c

Post by Sarah Sharp
index 7a856a7..19e8921 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -72,6 +72,7 @@ static void xhci_pci_quirks(struct device *dev, str=

uct xhci_hcd *xhci)

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0xhci_dbg(xhci, "QUIRK: Fresco Logic re=

vision %u "

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0"has b=

roken MSI implementation\n",

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0pdev->=

revision);

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 xhci->quirks |=3D XHCI_TRUST_TX_LENGTH;
=A0 =A0 =A0 =A0}
=A0 =A0 =A0 =A0if (pdev->vendor =3D=3D PCI_VENDOR_ID_NEC)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-rin=

g.c

Post by Sarah Sharp
index 3d9422f..951a9c3 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1786,8 +1786,12 @@ static int process_isoc_td(struct xhci_hcd *xh=

ci, struct xhci_td *td,

Post by Sarah Sharp
=A0 =A0 =A0 =A0/* handle completion code */
=A0 =A0 =A0 =A0switch (trb_comp_code) {
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 frame->status =3D 0;
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (TRB_LEN(le32_to_cpu(event->transfer=

_len)) =3D=3D 0) {

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 frame->status =3D 0;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 }
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if ((xhci->quirks & XHCI_TRUST_TX_LENGT=

H))

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 trb_comp_code =3D COMP_=

SHORT_TX;

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0frame->status =3D td->urb->transfer_fl=

ags & URB_SHORT_NOT_OK ?

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0-EREMO=

TEIO : 0;

Post by Sarah Sharp
@@ -1883,13 +1887,16 @@ static int process_bulk_intr_td(struct xhci_h=

cd *xhci, struct xhci_td *td,

Post by Sarah Sharp
=A0 =A0 =A0 =A0switch (trb_comp_code) {
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Double check that the HW transferre=

d everything. */

Post by Sarah Sharp
- =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (event_trb !=3D td->last_trb) {
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (event_trb !=3D td->last_trb ||
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 TRB_LEN=

(le32_to_cpu(event->transfer_len)) !=3D 0) {

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0xhci_warn(xhci, "WARN =

Successful completion "

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=

=A0 =A0"on short TX\n");

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if (td->urb->transfer_=

flags & URB_SHORT_NOT_OK)

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0*statu=

s =3D -EREMOTEIO;

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0else
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0*statu=

s =3D 0;

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 if ((xhci->quirks & XHC=

I_TRUST_TX_LENGTH))

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 trb_com=

p_code =3D COMP_SHORT_TX;

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0} else {
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0*status =3D 0;
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0}
@@ -2048,6 +2055,13 @@ static int handle_tx_event(struct xhci_hcd *xh=

ci,

Post by Sarah Sharp
=A0 =A0 =A0 =A0 * transfer type
=A0 =A0 =A0 =A0 */
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (TRB_LEN(le32_to_cpu(event->transfer=

_len)) =3D=3D 0)

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 break;
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 if (xhci->quirks & XHCI_TRUST_TX_LENGTH=

)

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 trb_comp_code =3D COMP_=

SHORT_TX;

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 else
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 xhci_warn(xhci, "WARN S=

uccessful completion on short TX: "

Post by Sarah Sharp
+ =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0=

=A0 =A0 "needs XHCI_TRUST_TX_LENGTH quirk?\n");

Post by Sarah Sharp
=A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 3d69c4b..abfb321 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1479,6 +1479,7 @@ struct xhci_hcd {
=A0#define XHCI_RESET_ON_RESUME =A0 (1 << 7)
=A0#define =A0 =A0 =A0 =A0XHCI_SW_BW_CHECKING =A0 =A0 (1 << 8)
=A0#define XHCI_AMD_0x96_HOST =A0 =A0 (1 << 9)
+#define XHCI_TRUST_TX_LENGTH =A0 (1 << 10)
=A0 =A0 =A0 =A0unsigned int =A0 =A0 =A0 =A0 =A0 =A0num_active_eps;
=A0 =A0 =A0 =A0unsigned int =A0 =A0 =A0 =A0 =A0 =A0limit_active_eps;
=A0 =A0 =A0 =A0/* There are two roothubs to keep track of bus suspend=

info for */

Post by Sarah Sharp
--
1.7.9
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" =

in

Post by Sarah Sharp
More majordomo info at =A0http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Karl Kiniger]

Hi

Post by Sergio Correia
Hello folks,
when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 port,
it works normally.

the usb 3.0 file must be played at about 10 percent
higher speed (e.g. mplayer -speed 1.10) to get the same pitch as the
usb 2 file.

just an additional hint.

Karl
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Hi Karl,

Hi

Post by Sergio Correia
Hello folks,
when I use the microphone of my Logitech headset plugged into a USB
3.0 port I get a robotic-like voice; if I plug it into a USB 2.0 por=

t,

Post by Sergio Correia
it works normally.

the usb 3.0 file =A0must be played at about 10 percent
higher speed (e.g. mplayer -speed 1.10) to get the same pitch as the
usb 2 file.
just an additional hint.

thanks for the hint. Indeed, that seems to be the problem, or related
to it, at least. Sarah wondered whether I am getting different
sampling rates under xHCI and EHCI.
Do you have any further ideas to help find the cause of this?

thank you,
Sergio

Karl

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Karl Kiniger]

Hi Sergio,
...

Post by Sergio Correia

Post by Karl Kiniger
just an additional hint.

thanks for the hint. Indeed, that seems to be the problem, or related
to it, at least. Sarah wondered whether I am getting different
sampling rates under xHCI and EHCI.
Do you have any further ideas to help find the cause of this?

Unfortunately I dont know much here. Just because I happen to have the absolute
pitch (or what it is called in English) it was the first thing I noticed
when listening ...

Karl

Post by Sergio Correia
thank you,
Sergio

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Sergio Correia]

Hi Karl,

Post by Karl Kiniger
Hi Sergio,
...

Post by Karl Kiniger
just an additional hint.

thanks for the hint. Indeed, that seems to be the problem, or relate=

d

Post by Karl Kiniger

to it, at least. Sarah wondered whether I am getting different
sampling rates under xHCI and EHCI.
Do you have any further ideas to help find the cause of this?

Unfortunately I dont know much here. Just because I happen to have th=

e absolute

Post by Karl Kiniger
pitch (or what it is called in English) it was the first thing I noti=

ced

Post by Karl Kiniger
when listening ...

no problem, and thanks for your help anyway! Sarah figured out I got
an odd controller and seems that adding a quirk for it solved the
problem.

thanks again,
sergio

Post by Karl Kiniger
Karl

thank you,
Sergio

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" =

in

Post by Karl Kiniger
More majordomo info at =A0http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html