Discussion:
LineageOS 14.1 x86 codebase is ready
Jaap Jan Meijer
2017-02-28 07:40:02 UTC
Permalink
Hello everybody,

I merged our cm codebase with LineageOS. You can get the code as following:

git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml

http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml

repo sync


At this moment you need to remove the cm kernel.mk and bt test_vendor_lib
to get a complete build:
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/kernel.mk


Download LineageOS 14.1 x86_64 (for testing):
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-02-28 08:11:56 UTC
Permalink
I need test 32 bit .

圚 2017幎2月28日星期二 UTC+8䞋午3:40:09JJ Meijer写道
Post by Jaap Jan Meijer
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt test_vendor_lib
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-02-28 08:50:49 UTC
Permalink
welldebug mode no problemno killed .
I found my last compilation 4.8 kernel(enable selinux and F2FS
security)boot lineage os successbut at that time can't boot aosp nougat .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-02-28 19:26:35 UTC
Permalink
Unfortunately in my case boot but as usual no BT, no sound, no HW buttons,,
but no freeze and HW accelerated UI, Wifi works, no touchscreen.

Tested my latest 4.8 kernel, even not boot. not sure why. In CM13 this
custom kernel boots, and BT and sound (internal speakers) works. (thanks
youling257), but as usual no touchscreen (Silead), no HWbuttons no battery.


Youling256, can you please share your latest patches collection? and kernel
configs?

Thanks
Post by youling 257
welldebug mode no problemno killed .
I found my last compilation 4.8 kernel(enable selinux and F2FS
security)boot lineage os successbut at that time can't boot aosp nougat .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-02-28 20:50:35 UTC
Permalink
Do not want to talk about the kernel under the codebase thread . Nougat
kernel different from
marshmallowhttps://osdn.net/projects/android-x86/scm/git/device-generic-common/blobs/nougat-x86/selinux_diffconfig

圚 2017幎3月1日星期䞉 UTC+8䞊午3:26:35Jose Luis s写道
Post by Jose Luis s
Unfortunately in my case boot but as usual no BT, no sound, no HW
buttons,, but no freeze and HW accelerated UI, Wifi works, no touchscreen.
Tested my latest 4.8 kernel, even not boot. not sure why. In CM13 this
custom kernel boots, and BT and sound (internal speakers) works. (thanks
youling257), but as usual no touchscreen (Silead), no HWbuttons no battery.
Youling256, can you please share your latest patches collection? and
kernel configs?
Thanks
Post by youling 257
welldebug mode no problemno killed .
I found my last compilation 4.8 kernel(enable selinux and F2FS
security)boot lineage os successbut at that time can't boot aosp nougat .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-03-01 10:50:36 UTC
Permalink
Ok,

I didn't know that, maybe you can send PM with the details....
Post by youling 257
Do not want to talk about the kernel under the codebase thread . Nougat
kernel different from marshmallow
https://osdn.net/projects/android-x86/scm/git/device-generic-common/blobs/nougat-x86/selinux_diffconfig
圚 2017幎3月1日星期䞉 UTC+8䞊午3:26:35Jose Luis s写道
Post by Jose Luis s
Unfortunately in my case boot but as usual no BT, no sound, no HW
buttons,, but no freeze and HW accelerated UI, Wifi works, no touchscreen.
Tested my latest 4.8 kernel, even not boot. not sure why. In CM13 this
custom kernel boots, and BT and sound (internal speakers) works. (thanks
youling257), but as usual no touchscreen (Silead), no HWbuttons no battery.
Youling256, can you please share your latest patches collection? and
kernel configs?
Thanks
Post by youling 257
welldebug mode no problemno killed .
I found my last compilation 4.8 kernel(enable selinux and F2FS
security)boot lineage os successbut at that time can't boot aosp nougat .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jon West
2017-03-01 13:55:52 UTC
Permalink
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-01 14:45:24 UTC
Permalink
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can
merge https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ

圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-03-01 16:00:00 UTC
Permalink
Thanks a lot Youling256 as usual your advises are very handy, Screen
backlight is the only reason not to use 4.10 kernel?

And please, beside this patches do you use your tablet own dsdt (probably
for using HW buttons) can you provide us more info?, in linuxium zesty
ubuntu 4.10 kernel my HW buttons works OOTB without providing no DSDT.

This is a great community. :-)
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-03-01 16:05:07 UTC
Permalink
Do you use special firmware for your silead touchscreen in your onda
tablet? from ointake?
Post by Jose Luis s
Thanks a lot Youling256 as usual your advises are very handy, Screen
backlight is the only reason not to use 4.10 kernel?
And please, beside this patches do you use your tablet own dsdt (probably
for using HW buttons) can you provide us more info?, in linuxium zesty
ubuntu 4.10 kernel my HW buttons works OOTB without providing no DSDT.
This is a great community. :-)
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-01 16:17:15 UTC
Permalink
http://4pda.ru/forum/index.php?showtopic=650808&view=findpost&p=55476620 
http://4pda.ru/forum/index.php?showtopic=650808&view=findpost&p=55487213 
https://github.com/onitake/gsl-firmware/issues/25

error -11 !

圚 2017幎3月2日星期四 UTC+8䞊午12:05:08Jose Luis s写道
Post by Jose Luis s
Do you use special firmware for your silead touchscreen in your onda
tablet? from ointake?
Post by Jose Luis s
Thanks a lot Youling256 as usual your advises are very handy, Screen
backlight is the only reason not to use 4.10 kernel?
And please, beside this patches do you use your tablet own dsdt (probably
for using HW buttons) can you provide us more info?, in linuxium zesty
ubuntu 4.10 kernel my HW buttons works OOTB without providing no DSDT.
This is a great community. :-)
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-01 16:25:24 UTC
Permalink
You do not have any progress !
power button just CONFIG_INPUT_AXP20X_PEK=m or y
volume button
LKP-x86-platform-acpi-7486341a98f-genirq-Flags-mismatch-irq-8.-00000080-mmc0-vs.-00000000-rtc0.patch
https://groups.google.com/d/msg/android-x86/hB0dlveMIRE/xKiCn6lRAAAJ

DSDT patchonly for PWM lpss control

圚 2017幎3月2日星期四 UTC+8䞊午12:00:01Jose Luis s写道
Post by Jose Luis s
Thanks a lot Youling256 as usual your advises are very handy, Screen
backlight is the only reason not to use 4.10 kernel?
And please, beside this patches do you use your tablet own dsdt (probably
for using HW buttons) can you provide us more info?, in linuxium zesty
ubuntu 4.10 kernel my HW buttons works OOTB without providing no DSDT.
This is a great community. :-)
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-03-01 17:54:26 UTC
Permalink
Unfortunately this is the case.

I only ot BT and sound (internal speakers) working in maurossi 4.8-rc5
kernel, no further progress..... most of lack of time, and of course lots
of compilation issues that I'm not be able to solve, when luckily I end up
compiling some kernel with some new patch and updating system.sfs and
kernel then this kernel does not boot. For me it's a nightmare.

I'll keep up trying......
Post by youling 257
You do not have any progress !
power button just CONFIG_INPUT_AXP20X_PEK=m or y
volume button
LKP-x86-platform-acpi-7486341a98f-genirq-Flags-mismatch-irq-8.-00000080-mmc0-vs.-00000000-rtc0.patch
https://groups.google.com/d/msg/android-x86/hB0dlveMIRE/xKiCn6lRAAAJ
DSDT patchonly for PWM lpss control
圚 2017幎3月2日星期四 UTC+8䞊午12:00:01Jose Luis s写道
Post by Jose Luis s
Thanks a lot Youling256 as usual your advises are very handy, Screen
backlight is the only reason not to use 4.10 kernel?
And please, beside this patches do you use your tablet own dsdt (probably
for using HW buttons) can you provide us more info?, in linuxium zesty
ubuntu 4.10 kernel my HW buttons works OOTB without providing no DSDT.
This is a great community. :-)
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-03-01 20:46:32 UTC
Permalink
I'll try to check out these patches as well. On my Baytrail tablet audio
stopped working after kernel 4.4.

Here is a x86 build:
https://drive.google.com/open?id=0B9vJ9JSuyPijbjJPQjVLUUxNTUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jose Luis s
2017-03-03 10:17:04 UTC
Permalink
Youling, do you mean 4.8.17 mainline kernel?, Maurossi only has a 4.8.0
branch. If is mainline kernel, so we need to apply configs from
android-x86, isn't it?
Post by youling 257
first you need open branch 4.8.17 must 4.8.17 !
https://groups.google.com/d/msg/android-x86/ShyjttALNSg/1Rk4lJMIDgAJ
because
https://github.com/burzumishi/linux-baytrail-flexx10/issues/15#issuecomment-269932045
by the way if you can merge
https://git.kernel.org/cgit/linux/kernel/git/broonie/sound.git/log/?h=topic/intel
on 4.8.17 kernel .
my patch 
https://groups.google.com/d/msg/android-x86/lfTVsTAvJ6c/0Z0aJmyrAQAJ
圚 2017幎3月1日星期䞉 UTC+8䞋午9:55:53Jon West写道
Post by Jon West
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Jon West
2017-03-01 13:55:57 UTC
Permalink
I too would love to see what kernel patches you have Youling.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-01 21:36:29 UTC
Permalink
Three asound.state(bytcrrt5640.state) for Insyde
deviceshttps://patchwork.kernel.org/patch/9497925/
compare speaker and headset state filehttp://imgur.com/a/W4VSn .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-01 21:57:09 UTC
Permalink
Three asound.state(bytcrrt5640.state) for Insyde
deviceshttps://patchwork.kernel.org/patch/9497925/
compare speaker and headset state filehttp://imgur.com/a/W4VSn .
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-02 07:41:02 UTC
Permalink
I remember Bluetooth can work
https://groups.google.com/d/msg/android-x86/oR9PpcPnRVA/a3v0hGVdAwAJ
https://groups.google.com/d/msg/android-x86/kRsVzHYjObE/Higs8r-sAAAJ
https://groups.google.com/d/msg/android-x86/kRsVzHYjObE/zcnjo0u2AAAJ

But now can't work
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-03-02 07:46:57 UTC
Permalink
I haven't see Bluetooth work many months on nougat from 7.1.1 r4 . 6.0
r2、r1Bluetooth all can work .

圚 2017幎3月2日星期四 UTC+8䞋午3:41:03youling 257写道
I remember Bluetooth can work 
https://groups.google.com/d/msg/android-x86/oR9PpcPnRVA/a3v0hGVdAwAJ 
https://groups.google.com/d/msg/android-x86/kRsVzHYjObE/Higs8r-sAAAJ 
https://groups.google.com/d/msg/android-x86/kRsVzHYjObE/zcnjo0u2AAAJ
But now can't work
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Russ B
2017-03-09 18:50:58 UTC
Permalink
No Wifi or sound on Intel Cherry Trail (z8700) SOC based Tablet
Post by Jaap Jan Meijer
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt test_vendor_lib
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-05-19 12:23:05 UTC
Permalink
request newest lineage os 14.1 based on 7.1.2
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
zzs20020430
2017-05-22 12:11:37 UTC
Permalink
+1

圚 2017幎5月19日星期五 UTC+8䞋午8:23:05youling 257写道
Post by youling 257
request newest lineage os 14.1 based on 7.1.2
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-14 21:57:55 UTC
Permalink
Post by youling 257
request newest lineage os 14.1 based on 7.1.2
We are doing some final testing and the official release should be up soon.

Here's a test build to check out. It includes an experimental Intel sensor
HUB fix (also including OpenGAPPS pico & deodexed)
https://drive.google.com/open?id=0B9vJ9JSuyPijSlBQMnlYaElhVGs
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-14 22:24:13 UTC
Permalink
but i use 32bitmany app and data on itwhen willl stable release public ?
32 bit 7.1 with xposed is perfecti suggest you build three
version64K32U32K32U64K64U
圚 2017幎8月15日星期二 UTC+8䞊午5:57:55JJ Meijer写道
Post by JJ Meijer
Post by youling 257
request newest lineage os 14.1 based on 7.1.2
We are doing some final testing and the official release should be up soon.
Here's a test build to check out. It includes an experimental Intel sensor
HUB fix (also including OpenGAPPS pico & deodexed)
https://drive.google.com/open?id=0B9vJ9JSuyPijSlBQMnlYaElhVGs
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-14 22:30:01 UTC
Permalink
since 26/7/17 beginnougat xposed no crash、no app stoppedperfect.
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
no x86_64 version.
if you can built-in these xposed source with lineage os x86_64
Source (for dev):
Xposed ART: https://github.com/PurifyOS/xposed_art_n
Xposed App_process: https://github.com/PurifyOS/xposed_app_process
XposedBridge: https://github.com/PurifyOS/XposedBridge
XposedTools: https://github.com/PurifyOS/XposedTools

圚 2017幎8月15日星期二 UTC+8䞊午6:24:14youling 257写道
Post by youling 257
but i use 32bitmany app and data on itwhen willl stable release public ?
32 bit 7.1 with xposed is perfecti suggest you build three
version64K32U32K32U64K64U
圚 2017幎8月15日星期二 UTC+8䞊午5:57:55JJ Meijer写道
Post by JJ Meijer
Post by youling 257
request newest lineage os 14.1 based on 7.1.2
We are doing some final testing and the official release should be up soon.
Here's a test build to check out. It includes an experimental Intel
sensor HUB fix (also including OpenGAPPS pico & deodexed)
https://drive.google.com/open?id=0B9vJ9JSuyPijSlBQMnlYaElhVGs
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 00:21:32 UTC
Permalink
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.

圚 2017幎8月15日星期二 UTC+8䞊午5:57:55JJ Meijer写道
Post by JJ Meijer
Post by youling 257
request newest lineage os 14.1 based on 7.1.2
We are doing some final testing and the official release should be up soon.
Here's a test build to check out. It includes an experimental Intel sensor
HUB fix (also including OpenGAPPS pico & deodexed)
https://drive.google.com/open?id=0B9vJ9JSuyPijSlBQMnlYaElhVGs
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-15 14:46:56 UTC
Permalink
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
No problem, here's a x86 build:

https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 15:50:28 UTC
Permalink
same resultfailed to bootdo you test it on bay trail tablet ?

圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 16:16:11 UTC
Permalink
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-15 19:11:45 UTC
Permalink
Post by youling 257
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
Can you try to boot with AUTO_LOAD=old added to the kernel boot parameters?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 19:32:18 UTC
Permalink
<13>[ 73.751927] init: Service 'bluetoothtbd' (pid 3138) killed by signal 6
<13>[ 73.752151] init: Service 'bluetoothtbd' (pid 3138) killing any
children in process group
<11>[ 78.757470] init: Service bluetoothtbd does not have a SELinux domain
defined.
<13>[ 78.757706] init: Starting service 'bluetoothtbd'...
<13>[ 79.257980] init: Service 'bluetoothtbd' (pid 3150) killed by signal 6
<13>[ 79.258215] init: Service 'bluetoothtbd' (pid 3150) killing any
children in process group
<11>[ 83.263037] init: Service bluetoothtbd does not have a SELinux domain
defined.
<13>[ 83.263272] init: Starting service 'bluetoothtbd'...
<13>[ 83.549580] init: Service 'bluetoothtbd' (pid 3166) killed by signal 6
<13>[ 83.549804] init: Service 'bluetoothtbd' (pid 3166) killing any
children in process group

<13>[ 89.023618] init: Service 'bluetoothtbd' (pid 3272) killed by signal 6
<13>[ 89.023839] init: Service 'bluetoothtbd' (pid 3272) killing any
children in process group
<38>[ 89.931612] type=1400 audit(1502854017.584:137): avc: denied { ioctl }
for pid=1176 comm="sh" path="/dev/tty3" dev="rootfs" ino=6388
ioctlcmd=0x5401 scontext=u:r:kernel:s0 tcontext=u:object_r:rootfs:s0
tclass=chr_file permissive=1
<38>[ 89.937419] type=1400 audit(1502854017.589:138): avc: denied { open }
for pid=3281 comm="dmesg" path="/dev/urandom" dev="rootfs" ino=7192
scontext=u:r:kernel:s0 tcontext=u:object_r:rootfs:s0 tclass=chr_file
permissive=1
<11>[ 94.029595] init: Service bluetoothtbd does not have a SELinux domain
defined.
<13>[ 94.029608] init: Starting service 'bluetoothtbd'...
<13>[ 94.256258] init: Service 'bluetoothtbd' (pid 3288) killed by signal 6
<13>[ 94.256480] init: Service 'bluetoothtbd' (pid 3288) killing any
children in process group
<38>[ 95.416278] type=1400 audit(1502854023.069:139): avc: denied { open }
for pid=2783 comm="installd" path="/selinux_version" dev="tmpfs" ino=4213
scontext=u:r:installd:s0 tcontext=u:object_r:tmpfs:s0 tclass=file
permissive=1

圚 2017幎8月16日星期䞉 UTC+8䞊午3:11:46JJ Meijer写道
Post by JJ Meijer
Post by youling 257
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
Can you try to boot with AUTO_LOAD=old added to the kernel boot parameters?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 19:46:31 UTC
Permalink
Final enter Android !
<3>[ 8.738446] EXT4-fs (loop1): couldn't mount as ext3 due to feature
incompatibilities
<6>[ 8.786432] usb 1-1.3.1: new high-speed USB device number 5 using
xhci_hcd
<6>[ 8.820536] EXT4-fs (loop1): mounted filesystem with ordered data mode.
Opts: (null)
<6>[ 8.905128] usb 1-1.3.1: New USB device found, idVendor=0b95,
idProduct=1790
<6>[ 8.933480] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
<6>[ 8.933490] usb 1-1.3.1: Product: AX88179
<6>[ 8.933499] usb 1-1.3.1: Manufacturer: ASIX Elec. Corp.
<6>[ 8.933507] usb 1-1.3.1: SerialNumber: ***@3
<6>[ 27.222548] 80860F0A:00: ttyS1 at MMIO 0x90919000 (irq = 39, base_baud
= 2764800) is a 16550A
<6>[ 27.265277] 80860F0A:01: ttyS2 at MMIO 0x9091b000 (irq = 40, base_baud
= 2764800) is a 16550A
<6>[ 27.465026] Bluetooth: Core ver 2.22
<6>[ 27.487332] NET: Registered protocol family 31
<6>[ 27.496068] Bluetooth: HCI device and connection manager initialized
<6>[ 27.504382] Bluetooth: HCI socket layer initialized
<6>[ 27.512657] Bluetooth: L2CAP socket layer initialized
<6>[ 27.520919] Bluetooth: SCO socket layer initialized
<6>[ 27.557423] Bluetooth: HCI UART driver ver 2.3
<6>[ 27.572402] Bluetooth: HCI UART protocol H4 registered
<6>[ 27.581196] Bluetooth: HCI UART protocol BCSP registered
<6>[ 27.589764] Bluetooth: HCI UART protocol LL registered
<6>[ 27.598660] Bluetooth: HCI UART protocol ATH3K registered
<6>[ 27.606580] Bluetooth: HCI UART protocol Three-wire (H5) registered
<6>[ 27.614599] Bluetooth: HCI UART protocol Intel registered
<6>[ 27.622523] Bluetooth: HCI UART protocol Broadcom registered
<6>[ 27.630411] Bluetooth: HCI UART protocol QCA registered
<6>[ 27.692043] rfkill_gpio OBDA8723:00: OBDA8723:00 device registered.
<6>[ 27.993353] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
<6>[ 28.051627] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded

load modules wating 20s.

圚 2017幎8月16日星期䞉 UTC+8䞊午3:11:46JJ Meijer写道
Post by JJ Meijer
Post by youling 257
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
Can you try to boot with AUTO_LOAD=old added to the kernel boot parameters?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 20:09:37 UTC
Permalink
AUTO_LOAD=old etc/modules.blacklist not working !

圚 2017幎8月16日星期䞉 UTC+8䞊午3:11:46JJ Meijer写道
Post by JJ Meijer
Post by youling 257
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
Can you try to boot with AUTO_LOAD=old added to the kernel boot parameters?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 20:21:14 UTC
Permalink
my modules.blacklist is
blacklist evbug
blacklist battery
blacklist goodix
blacklist gslx680_ts_acpi
blacklist max17042_battery
blacklist intel_cht_int33fe
blacklist intel_cht_usb_mux
blacklist snd-soc-rt5645
blacklist snd-soc-rt5670
blacklist snd-soc-tlv320aic31xx
blacklist axp288_fuel_gauge
blacklist axp288_charger
blacklist extcon-axp288
blacklist extcon-core
blacklist int3400_thermal
blacklist int3402_thermal
blacklist int3403_thermal
blacklist int340x_thermal_zone
blacklist processor_thermal_device

butandroid_x86:/ $ dmesg | grep blacklist
[ 32.807489] audit: type=1400 audit(1502856876.467:11): avc: denied { read
} for pid=2690 comm="ueventd" name="modules.blacklist" dev="mmcblk1p9"
ino=386974 scontext=u:r:ueventd:s0 tcontext=u:object_r:unlabeled:s0
tclass=file permissive=1
[ 34.540364] ueventd: blacklisted module evbug: 1
[ 34.605298] ueventd: blacklisted module evbug: 1
[ 34.621381] ueventd: blacklisted module evbug: 1
[ 34.638030] ueventd: blacklisted module intel_cht_usb_mux: 1
[ 34.667042] ueventd: blacklisted module int3400_thermal: 1
[ 34.710363] ueventd: blacklisted module axp288_fuel_gauge: 1
[ 34.809723] ueventd: blacklisted module evbug: 1
[ 34.816267] ueventd: blacklisted module evbug: 1
[ 34.818433] ueventd: blacklisted module axp288_charger: 1

圚 2017幎8月16日星期䞉 UTC+8䞊午4:09:38youling 257写道
Post by youling 257
AUTO_LOAD=old etc/modules.blacklist not working !
圚 2017幎8月16日星期䞉 UTC+8䞊午3:11:46JJ Meijer写道
Post by JJ Meijer
Post by youling 257
圚 2017幎8月15日星期二 UTC+8䞋午10:46:56JJ Meijer写道
Post by JJ Meijer
Post by youling 257
unfortunatelydmesg sysrq failed to bootauto rebooti need 32 bit.
https://drive.google.com/open?id=0B9vJ9JSuyPijVWlMYkhIdVNqUDg
Can you try to boot with AUTO_LOAD=old added to the kernel boot parameters?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-15 21:10:21 UTC
Permalink
You can also try this one without AUTO_LOAD=old:

https://drive.google.com/open?id=0B9vJ9JSuyPijVHNtSkx5d3cwMVE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-15 21:37:47 UTC
Permalink
nice !
a bugcan't Colorate navigation barfor example xposed installer app
can you enable round icon default ?

圚 2017幎8月16日星期䞉 UTC+8䞊午5:10:21JJ Meijer写道
Post by JJ Meijer
https://drive.google.com/open?id=0B9vJ9JSuyPijVHNtSkx5d3cwMVE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-10-15 10:59:13 UTC
Permalink
solvedconfig_navBarOpacityMode 0

圚 2017幎8月16日星期䞉 UTC+8䞊午5:37:47youling 257写道
Post by youling 257
nice !
a bugcan't Colorate navigation barfor example xposed installer app
can you enable round icon default ?
圚 2017幎8月16日星期䞉 UTC+8䞊午5:10:21JJ Meijer写道
Post by JJ Meijer
https://drive.google.com/open?id=0B9vJ9JSuyPijVHNtSkx5d3cwMVE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Genx
2017-10-16 10:31:55 UTC
Permalink
Sir,
Are you using latest official v88.1 x86 version or any customized xposed x64 ,purifyOS version.
Thanks
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-16 20:58:59 UTC
Permalink
your build include “DisplayManagerService: disable display blanking on
suspend” ?
https://osdn.net/projects/android-x86/scm/git/frameworks-base/tree/cm-14.1-x86/services/core/java/com/android/server/display/
https://osdn.net/projects/android-x86/scm/git/frameworks-base/tree/nougat-x86/services/core/java/com/android/server/display/

圚 2017幎8月16日星期䞉 UTC+8䞊午5:10:21JJ Meijer写道
Post by JJ Meijer
https://drive.google.com/open?id=0B9vJ9JSuyPijVHNtSkx5d3cwMVE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-17 16:50:36 UTC
Permalink
Post by youling 257
your build include “DisplayManagerService: disable display blanking on
suspend”
Thanks I missed it, here are new builds including cold boot and display
blanking fixes:
https://drive.google.com/open?id=0B9vJ9JSuyPijaVNZZHNuaDJDWUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
fguy
2017-08-17 18:16:36 UTC
Permalink
Bingo - this patch solves the problem with the Internet and kills the
brightness adjustment
Post by JJ Meijer
Post by youling 257
your build include “DisplayManagerService: disable display blanking on
suspend”
Thanks I missed it, here are new builds including cold boot and display
https://drive.google.com/open?id=0B9vJ9JSuyPijaVNZZHNuaDJDWUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-17 18:26:36 UTC
Permalink
this patchcan't adjust brightness !

圚 2017幎8月18日星期五 UTC+8䞊午2:16:36fguy写道
Post by fguy
Bingo - this patch solves the problem with the Internet and kills the
brightness adjustment
Post by JJ Meijer
Post by youling 257
your build include “DisplayManagerService: disable display blanking on
suspend”
Thanks I missed it, here are new builds including cold boot and display
https://drive.google.com/open?id=0B9vJ9JSuyPijaVNZZHNuaDJDWUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-08-17 18:33:42 UTC
Permalink
nowthe newest build can't adjust brightness on my tablet

i replace my old services.jar can adjust brightnessmy old services.jar
added 黑域补䞁

圚 2017幎8月18日星期五 UTC+8䞊午2:16:36fguy写道
Post by fguy
Bingo - this patch solves the problem with the Internet and kills the
brightness adjustment
Post by JJ Meijer
Post by youling 257
your build include “DisplayManagerService: disable display blanking on
suspend”
Thanks I missed it, here are new builds including cold boot and display
https://drive.google.com/open?id=0B9vJ9JSuyPijaVNZZHNuaDJDWUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-17 21:52:17 UTC
Permalink
Post by fguy
Bingo - this patch solves the problem with the Internet and kills the
brightness adjustmen
I agree, after reverting the display blanking patch it's working again.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
fguy
2017-08-18 22:39:18 UTC
Permalink
I collected LOS 14.1 x86_64 from the repository android-x86 "as is", but it
does not connect to the Internet via wi-fi - it writes the status
"connected, no Internet". In your assembly, there are no such problems.
Could you post your patches?
I also tested the maurossi kernels - for 7.1.2-r33 the 4.11 with the patch
of netes worked well - it works with the wifi faster and there is almost no
conflict with the sound at loading as on 4.9.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
fguy
2017-08-18 22:43:22 UTC
Permalink
Mr. Meijer,
I collected LOS 14.1 x86_64 from the repository android-x86 "as is", but it
does not connect to the Internet via wi-fi - it writes the status
"connected, no Internet". In your assembly, there are no such problems.
Could you post your patches?
I also tested the maurossi kernels - for 7.1.2-r33 the 4.11 with the patch
of netd worked well - it works with the wifi faster and there is almost no
conflict with the sound at loading as on 4.9. Maybe in the LOS it will work
better than 4.9.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-22 16:55:17 UTC
Permalink
Post by Marc Ranolfi
Mr. Meijer,
I collected LOS 14.1 x86_64 from the repository android-x86 "as is", but
it does not connect to the Internet via wi-fi - it writes the status
"connected, no Internet". In your assembly, there are no such problems.
Could you post your patches?
I also tested the maurossi kernels - for 7.1.2-r33 the 4.11 with the patch
of netd worked well - it works with the wifi faster and there is almost no
conflict with the sound at loading as on 4.9. Maybe in the LOS it will work
better than 4.9.
Hi fguy,

I'm maintaining the CM branches from the Android-x86 project so every patch
you can find over here: https://osdn.net/projects/android-x86/scm/.
Also because of this I'm sticking to the longterm supported Kernels
(actually the Android-x86 Kernel), like Google is doing as well
https://android.googlesource.com/kernel/common/.

I hear good things about 4.11 / 4.12 but I won't release these builds
otherwise I will go mad. Go ahead and play with it yourself if you want to
experiment ;).
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Povilas Staniulis
2017-08-22 20:30:16 UTC
Permalink
What about 4.12 will make you go mad ? :)
Post by Marc Ranolfi
Mr. Meijer,
I collected LOS 14.1 x86_64 from the repository android-x86 "as
is", but it does not connect to the Internet via wi-fi - it writes
the status "connected, no Internet". In your assembly, there are
no such problems. Could you post your patches?
I also tested the maurossi kernels - for 7.1.2-r33 the 4.11 with
the patch of netd worked well - it works with the wifi faster and
there is almost no conflict with the sound at loading as on
4.9. Maybe in the LOS it will work better than 4.9.
Hi fguy,
I'm maintaining the CM branches from the Android-x86 project so every
patch you can find over here: https://osdn.net/projects/android-x86/scm/.
Also because of this I'm sticking to the longterm supported Kernels
(actually the Android-x86 Kernel), like Google is doing as well
https://android.googlesource.com/kernel/common/.
I hear good things about 4.11 / 4.12 but I won't release these builds
otherwise I will go mad. Go ahead and play with it yourself if you
want to experiment ;).
--
You received this message because you are subscribed to the Google
Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-22 22:02:18 UTC
Permalink
That 4.13 will be even better (probably) ;)
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Povilas Staniulis
2017-08-22 23:16:40 UTC
Permalink
Post by JJ Meijer
That 4.13 will be even better (probably) ;)
And 4.14 will be the next LTS...
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Marc Ranolfi
2017-08-17 17:50:20 UTC
Permalink
Mr. Meijer,

I assume you didn't see my previous message:



*Any plans to merge the iso_img target to the LineageOS codebase?*Thanks
Post by JJ Meijer
Post by youling 257
your build include “DisplayManagerService: disable display blanking on
suspend”
Thanks I missed it, here are new builds including cold boot and display
https://drive.google.com/open?id=0B9vJ9JSuyPijaVNZZHNuaDJDWUE
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
JJ Meijer
2017-08-18 13:56:15 UTC
Permalink
Post by Marc Ranolfi
Mr. Meijer,
*Any plans to merge the iso_img target to the LineageOS codebase?*Thanks
Hi Marc,

No plans from my side, it would be a serious lot of (boring) work to get
all patches we need to be merged.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Marc Ranolfi
2017-08-08 02:14:49 UTC
Permalink
Post by Jaap Jan Meijer
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86 -m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b nougat-x86 -m cm.xml
repo sync
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
Dear Mr. Jan Meijer and Mr. Huang,

Any plans to merge the iso_img target to the LineageOS codebase?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Genx
2017-10-11 15:36:11 UTC
Permalink
Dear Sir JJ Meijer ,
Is there any update on LOS 14.1 or it is
dropped by you .


Thanks
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2017-11-01 10:38:46 UTC
Permalink
I saw the newest x86_64 1031 build in your share link .

do you build newest 32bit x86 version ?

by the waydo you success boot enter home on 64K32U ? any idea with 64K32U
problem ?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Carpe Noctem
2017-11-20 18:06:16 UTC
Permalink
I'm having ramdom reboots and freezing on CM 14 x86, the same happens in
Nougat RC-2. You guys know how to fix it?
Post by Jaap Jan Meijer
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt test_vendor_lib
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
zhongtian xie
2018-01-18 04:55:21 UTC
Permalink
HI Jaap Jan Meijer and zhiwei:

I sync the cm repo and rm vendor/cm/build/tasks/kernel.mk
Then lunch 9 && m -j8 iso_img

there is something wrong while build:
-------------------------------------------------------------------------------------------------------------------------------------
1 warning generated.
[ 32% 18224/56025] target C++: libandroid_runtime_32 <=
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp
FAILED: /bin/bash -c "(PWD=/proc/self/cwd
prebuilts/gcc/linux-x86/x86/x86_64-linux-android-4.9/bin/x86_64-linux-android-g++
-I libnativehelper/include/nativehelper -I
frameworks/base/core/jni/android/graphics -I
frameworks/base/core/jni/../../libs/hwui -I
frameworks/base/core/jni/../../../native/opengl/libs -I
frameworks/base/core/jni/../../../native/vulkan/include -I
hardware/libhardware/include/hardware -I
hardware/libhardware_legacy/include/hardware_legacy -I
./frameworks/base/media/jni -I ./system/core/base/include -I
./system/core/include -I ./system/media/camera/include -I
./system/netd/include -I external/pdfium/core/include/fpdfapi -I
external/pdfium/fpdfsdk/include -I external/pdfium/public -I
external/pdfium -I external/skia/include/private -I external/skia/src/core
-I external/skia/src/effects -I external/skia/src/images -I
external/sqlite/dist -I external/sqlite/android -I external/expat/lib -I
external/tremor/Tremor -I external/harfbuzz_ng/src -I libcore/include -I
system/media/audio_utils/include -I frameworks/minikin/include -I
external/freetype/include -I bionic/libc/private -I
frameworks/base/core/jni -I
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates
-I
/data/androidx86/out/target/product/android_x86_64/gen/SHARED_LIBRARIES/libandroid_runtime_intermediates
-I libnativehelper/include/nativehelper \$(cat
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/import_includes)
-isystem system/core/include -isystem system/media/audio/include -isystem
hardware/libhardware/include -isystem hardware/libhardware_legacy/include
-isystem libnativehelper/include -isystem frameworks/native/include
-isystem frameworks/native/opengl/include -isystem frameworks/av/include
-isystem frameworks/base/include -isystem hardware/ril/include -isystem
/data/androidx86/out/target/product/android_x86_64/obj/include -isystem
bionic/libc/arch-x86/include -isystem bionic/libc/include -isystem
bionic/libc/kernel/uapi -isystem bionic/libc/kernel/common -isystem
bionic/libc/kernel/uapi/asm-x86 -isystem bionic/libm/include -isystem
bionic/libm/include/i387 -c -fno-exceptions -Wno-multichar -O2
-Wa,--noexecstack -Werror=format-security -D_FORTIFY_SOURCE=2
-Wstrict-aliasing=2 -ffunction-sections -finline-functions
-finline-limit=300 -fno-short-enums -fstrict-aliasing -funswitch-loops
-funwind-tables -fstack-protector-strong -m32 -no-canonical-prefixes
-fno-canonical-system-headers -march=prescott -msse4 -msse4.1 -msse4.2
-DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self
-Wpointer-arith -fdiagnostics-color -fdebug-prefix-map=/proc/self/cwd=
-Werror=return-type -Werror=non-virtual-dtor -Werror=address
-Werror=sequence-point -Werror=date-time -O2 -g -fno-strict-aliasing
-DNDEBUG -UDEBUG -Wsign-promo -fno-rtti -DHAVE_CONFIG_H
-DKHTML_NO_EXCEPTIONS -DGKWQ_NO_JAVA -DNO_SUPPORT_JS_BINDING
-DQT_NO_WHEELEVENT -DKHTML_NO_XBL -U__APPLE__ -Wno-unused-parameter
-Wno-non-virtual-dtor -Wno-maybe-uninitialized -Wno-parentheses
-DHWUI_NEW_OPS -DPACKED=\"\" -DGL_GLEXT_PROTOTYPES -DEGL_EGLEXT_PROTOTYPES
-DU_USING_ICU_NAMESPACE=0 -Wall -Werror -Wno-error=deprecated-declarations
-Wunused -Wunreachable-code -Wno-unknown-pragmas -fPIC -D_USING_LIBCXX
-std=gnu++11 -Wno-conversion-null -Werror=int-to-pointer-cast
-Werror=pointer-to-int-cast -MD -MF
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
-o
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.o
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp ) && (cp
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\\\\$//' -e '/^\$/ d' -e
's/\$/ :/' <
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
rm -f
/data/androidx86/out/target/product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
)"
*frameworks/base/core/jni/android/graphics/BitmapFactory.cpp: In function
'_jobject* nativeDecodeFileDescriptor(JNIEnv*, jobject, jobject, jobject,
jobject)':*
*frameworks/base/core/jni/android/graphics/BitmapFactory.cpp:591:13: error:
'kCallerPasses_Ownership' is not a member of 'SkFILEStream'*
* SkFILEStream::kCallerPasses_Ownership));*
^
[ 32% 18224/56025] Building with Jack:
/data/androidx86/out/target/common/obj/JAVA_LIBRARIES/framework_intermediates/with-local/classes.dex
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/data/androidx86'

#### make failed to build some targets (58:03 (mm:ss)) ####
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Post by Carpe Noctem
I'm having ramdom reboots and freezing on CM 14 x86, the same happens in
Nougat RC-2. You guys know how to fix it?
Post by Jaap Jan Meijer
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
zhongtian xie
2018-01-18 15:33:57 UTC
Permalink
Hi Jaap Jan Meijer:

To build the cm.xml manifest in addition to the need to perform the
following commands,:

1. repo init -u git://git.osdn.net/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
2. repo sync --force-sync
3. rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
4. lunch cm_android_x86_64-userdebug
5. m -j8 iso_img

but also what else;

Indeed i didn't find this dir ``` system/bt/vendor_libs/
*test_vendor_lib``` *while sync complete;
Post by zhongtian xie
I sync the cm repo and rm vendor/cm/build/tasks/kernel.mk
Then lunch 9 && m -j8 iso_img
------------------------------------------------------------
-------------------------------------------------------------------------
1 warning generated.
[ 32% 18224/56025] target C++: libandroid_runtime_32 <=
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp
FAILED: /bin/bash -c "(PWD=/proc/self/cwd prebuilts/gcc/linux-x86/x86/
x86_64-linux-android-4.9/bin/x86_64-linux-android-g++ -I
libnativehelper/include/nativehelper -I frameworks/base/core/jni/android/graphics
-I frameworks/base/core/jni/../../libs/hwui -I
frameworks/base/core/jni/../../../native/opengl/libs -I
frameworks/base/core/jni/../../../native/vulkan/include -I
hardware/libhardware/include/hardware -I hardware/libhardware_legacy/include/hardware_legacy
-I ./frameworks/base/media/jni -I ./system/core/base/include -I
./system/core/include -I ./system/media/camera/include -I
./system/netd/include -I external/pdfium/core/include/fpdfapi -I
external/pdfium/fpdfsdk/include -I external/pdfium/public -I
external/pdfium -I external/skia/include/private -I external/skia/src/core
-I external/skia/src/effects -I external/skia/src/images -I
external/sqlite/dist -I external/sqlite/android -I external/expat/lib -I
external/tremor/Tremor -I external/harfbuzz_ng/src -I libcore/include -I
system/media/audio_utils/include -I frameworks/minikin/include -I
external/freetype/include -I bionic/libc/private -I
frameworks/base/core/jni -I /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates
-I /data/androidx86/out/target/product/android_x86_64/gen/
SHARED_LIBRARIES/libandroid_runtime_intermediates -I
libnativehelper/include/nativehelper \$(cat /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/import_includes)
-isystem system/core/include -isystem system/media/audio/include -isystem
hardware/libhardware/include -isystem hardware/libhardware_legacy/include
-isystem libnativehelper/include -isystem frameworks/native/include
-isystem frameworks/native/opengl/include -isystem frameworks/av/include
-isystem frameworks/base/include -isystem hardware/ril/include -isystem
/data/androidx86/out/target/product/android_x86_64/obj/include -isystem
bionic/libc/arch-x86/include -isystem bionic/libc/include -isystem
bionic/libc/kernel/uapi -isystem bionic/libc/kernel/common -isystem
bionic/libc/kernel/uapi/asm-x86 -isystem bionic/libm/include -isystem
bionic/libm/include/i387 -c -fno-exceptions -Wno-multichar -O2
-Wa,--noexecstack -Werror=format-security -D_FORTIFY_SOURCE=2
-Wstrict-aliasing=2 -ffunction-sections -finline-functions
-finline-limit=300 -fno-short-enums -fstrict-aliasing -funswitch-loops
-funwind-tables -fstack-protector-strong -m32 -no-canonical-prefixes
-fno-canonical-system-headers -march=prescott -msse4 -msse4.1 -msse4.2
-DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self
-Wpointer-arith -fdiagnostics-color -fdebug-prefix-map=/proc/self/cwd=
-Werror=return-type -Werror=non-virtual-dtor -Werror=address
-Werror=sequence-point -Werror=date-time -O2 -g -fno-strict-aliasing
-DNDEBUG -UDEBUG -Wsign-promo -fno-rtti -DHAVE_CONFIG_H
-DKHTML_NO_EXCEPTIONS -DGKWQ_NO_JAVA -DNO_SUPPORT_JS_BINDING
-DQT_NO_WHEELEVENT -DKHTML_NO_XBL -U__APPLE__ -Wno-unused-parameter
-Wno-non-virtual-dtor -Wno-maybe-uninitialized -Wno-parentheses
-DHWUI_NEW_OPS -DPACKED=\"\" -DGL_GLEXT_PROTOTYPES -DEGL_EGLEXT_PROTOTYPES
-DU_USING_ICU_NAMESPACE=0 -Wall -Werror -Wno-error=deprecated-declarations
-Wunused -Wunreachable-code -Wno-unknown-pragmas -fPIC -D_USING_LIBCXX
-std=gnu++11 -Wno-conversion-null -Werror=int-to-pointer-cast
-Werror=pointer-to-int-cast -MD -MF /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_
intermediates/android/graphics/BitmapFactory.d -o
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.o
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp ) && (cp
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\\\\$//' -e '/^\$/ d' -e
's/\$/ :/' < /data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
Post by Carpe Noctem
Post by zhongtian xie
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
rm -f /data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
)"
*frameworks/base/core/jni/android/graphics/BitmapFactory.cpp: In function
'_jobject* nativeDecodeFileDescriptor(JNIEnv*, jobject, jobject, jobject,
jobject)':*
error: 'kCallerPasses_Ownership' is not a member of 'SkFILEStream'*
* SkFILEStream::kCallerPasses_Ownership));*
^
[ 32% 18224/56025] Building with Jack: /data/androidx86/out/target/
common/obj/JAVA_LIBRARIES/framework_intermediates/with-local/classes.dex
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/data/androidx86'
#### make failed to build some targets (58:03 (mm:ss)) ####
------------------------------------------------------------
------------------------------------------------------------
------------------------------------------------------------
--------------------------------------------------------------------
Post by Carpe Noctem
I'm having ramdom reboots and freezing on CM 14 x86, the same happens in
Nougat RC-2. You guys know how to fix it?
Post by zhongtian xie
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
zhongtian xie
2018-01-21 05:30:29 UTC
Permalink
Jaap Jan Meijer and zhiwei,

The reason why build cm-14.1-x86 error caused by a patch commit on
android-7.1.2_r36.

commit adb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6
"Stop explicitly using kCallerPasses_Ownership"

(
https://android.googlesource.com/platform/frameworks/base/+/adb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6%5E%21/
)

But in project external/skia 'SkStream.h' header file ,
kCallerPasses_Ownership
was stop using by commit e0a4c479456062367278bc04bc1c1ceb85de44a7;

diff --git a/include/core/SkStream.h b/include/core/SkStream.h
index 4502416..265fb64 100644
--- a/include/core/SkStream.h
+++ b/include/core/SkStream.h
@@ -11,8 +11,9 @@
#include "SkRefCnt.h"
#include "SkScalar.h"

-class SkData;
+#include <memory>

+class SkData;
class SkStream;
class SkStreamRewindable;
class SkStreamSeekable;
@@ -231,28 +232,20 @@ public:
/** Initialize the stream by calling sk_fopen on the specified path.
* This internal stream will be closed in the destructor.
*/
- explicit SkFILEStream(const char path[] = NULL);
+ explicit SkFILEStream(const char path[] = nullptr);

*- enum Ownership {*
*- kCallerPasses_Ownership,*
*- kCallerRetains_Ownership*
*- };*
/** Initialize the stream with an existing C file stream.
- * While this stream exists, it assumes exclusive access to the C
file stream.
- * The C file stream will be closed in the destructor unless the
caller specifies
- * kCallerRetains_Ownership.
+ * The C file stream will be closed in the destructor.
*/
- explicit SkFILEStream(FILE* file, Ownership ownership =
kCallerPasses_Ownership);
+ explicit SkFILEStream(FILE* file);

so we need apply the new patch on framework/base.
Post by zhongtian xie
I sync the cm repo and rm vendor/cm/build/tasks/kernel.mk
Then lunch 9 && m -j8 iso_img
------------------------------------------------------------
-------------------------------------------------------------------------
1 warning generated.
[ 32% 18224/56025] target C++: libandroid_runtime_32 <=
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp
FAILED: /bin/bash -c "(PWD=/proc/self/cwd prebuilts/gcc/linux-x86/x86/
x86_64-linux-android-4.9/bin/x86_64-linux-android-g++ -I
libnativehelper/include/nativehelper -I frameworks/base/core/jni/android/graphics
-I frameworks/base/core/jni/../../libs/hwui -I
frameworks/base/core/jni/../../../native/opengl/libs -I
frameworks/base/core/jni/../../../native/vulkan/include -I
hardware/libhardware/include/hardware -I hardware/libhardware_legacy/include/hardware_legacy
-I ./frameworks/base/media/jni -I ./system/core/base/include -I
./system/core/include -I ./system/media/camera/include -I
./system/netd/include -I external/pdfium/core/include/fpdfapi -I
external/pdfium/fpdfsdk/include -I external/pdfium/public -I
external/pdfium -I external/skia/include/private -I external/skia/src/core
-I external/skia/src/effects -I external/skia/src/images -I
external/sqlite/dist -I external/sqlite/android -I external/expat/lib -I
external/tremor/Tremor -I external/harfbuzz_ng/src -I libcore/include -I
system/media/audio_utils/include -I frameworks/minikin/include -I
external/freetype/include -I bionic/libc/private -I
frameworks/base/core/jni -I /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates
-I /data/androidx86/out/target/product/android_x86_64/gen/
SHARED_LIBRARIES/libandroid_runtime_intermediates -I
libnativehelper/include/nativehelper \$(cat /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/import_includes)
-isystem system/core/include -isystem system/media/audio/include -isystem
hardware/libhardware/include -isystem hardware/libhardware_legacy/include
-isystem libnativehelper/include -isystem frameworks/native/include
-isystem frameworks/native/opengl/include -isystem frameworks/av/include
-isystem frameworks/base/include -isystem hardware/ril/include -isystem
/data/androidx86/out/target/product/android_x86_64/obj/include -isystem
bionic/libc/arch-x86/include -isystem bionic/libc/include -isystem
bionic/libc/kernel/uapi -isystem bionic/libc/kernel/common -isystem
bionic/libc/kernel/uapi/asm-x86 -isystem bionic/libm/include -isystem
bionic/libm/include/i387 -c -fno-exceptions -Wno-multichar -O2
-Wa,--noexecstack -Werror=format-security -D_FORTIFY_SOURCE=2
-Wstrict-aliasing=2 -ffunction-sections -finline-functions
-finline-limit=300 -fno-short-enums -fstrict-aliasing -funswitch-loops
-funwind-tables -fstack-protector-strong -m32 -no-canonical-prefixes
-fno-canonical-system-headers -march=prescott -msse4 -msse4.1 -msse4.2
-DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self
-Wpointer-arith -fdiagnostics-color -fdebug-prefix-map=/proc/self/cwd=
-Werror=return-type -Werror=non-virtual-dtor -Werror=address
-Werror=sequence-point -Werror=date-time -O2 -g -fno-strict-aliasing
-DNDEBUG -UDEBUG -Wsign-promo -fno-rtti -DHAVE_CONFIG_H
-DKHTML_NO_EXCEPTIONS -DGKWQ_NO_JAVA -DNO_SUPPORT_JS_BINDING
-DQT_NO_WHEELEVENT -DKHTML_NO_XBL -U__APPLE__ -Wno-unused-parameter
-Wno-non-virtual-dtor -Wno-maybe-uninitialized -Wno-parentheses
-DHWUI_NEW_OPS -DPACKED=\"\" -DGL_GLEXT_PROTOTYPES -DEGL_EGLEXT_PROTOTYPES
-DU_USING_ICU_NAMESPACE=0 -Wall -Werror -Wno-error=deprecated-declarations
-Wunused -Wunreachable-code -Wno-unknown-pragmas -fPIC -D_USING_LIBCXX
-std=gnu++11 -Wno-conversion-null -Werror=int-to-pointer-cast
-Werror=pointer-to-int-cast -MD -MF /data/androidx86/out/target/
product/android_x86_64/obj_x86/SHARED_LIBRARIES/libandroid_runtime_
intermediates/android/graphics/BitmapFactory.d -o
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.o
frameworks/base/core/jni/android/graphics/BitmapFactory.cpp ) && (cp
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\\\\$//' -e '/^\$/ d' -e
's/\$/ :/' < /data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
Post by Carpe Noctem
Post by zhongtian xie
/data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.P;
rm -f /data/androidx86/out/target/product/android_x86_64/obj_
x86/SHARED_LIBRARIES/libandroid_runtime_intermediates/android/graphics/BitmapFactory.d
)"
*frameworks/base/core/jni/android/graphics/BitmapFactory.cpp: In function
'_jobject* nativeDecodeFileDescriptor(JNIEnv*, jobject, jobject, jobject,
jobject)':*
error: 'kCallerPasses_Ownership' is not a member of 'SkFILEStream'*
* SkFILEStream::kCallerPasses_Ownership));*
^
[ 32% 18224/56025] Building with Jack: /data/androidx86/out/target/
common/obj/JAVA_LIBRARIES/framework_intermediates/with-local/classes.dex
ninja: build stopped: subcommand failed.
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/data/androidx86'
#### make failed to build some targets (58:03 (mm:ss)) ####
------------------------------------------------------------
------------------------------------------------------------
------------------------------------------------------------
--------------------------------------------------------------------
Post by Carpe Noctem
I'm having ramdom reboots and freezing on CM 14 x86, the same happens in
Nougat RC-2. You guys know how to fix it?
Post by zhongtian xie
Hello everybody,
git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b
nougat-x86 -m cm.xml
repo sync
At this moment you need to remove the cm kernel.mk and bt
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/
kernel.mk
https://drive.google.com/open?id=0B9vJ9JSuyPijRzc1MzZ6emt2WDA
--
You received this message because you are subscribed to the Google Groups
"Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Harkaman
2018-02-13 19:25:38 UTC
Permalink
It looks like you have merged latest cm-14.1 branch. Is it ready to build
now?

Do we need to "At this moment you need to remove the cm kernel.mk and bt
test_vendor_lib to get a complete build:
rm -rf system/bt/vendor_libs/test_vendor_lib
vendor/cm/build/tasks/kernel.mk"?



git protocol
repo init -u git://git.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml

http protocol
repo init -u http://scm.osdn.jp/gitroot/android-x86/manifest -b nougat-x86
-m cm.xml

repo sync
Post by zhongtian xie
Post by zhongtian xie
Jaap Jan Meijer and zhiwei,
The reason why build cm-14.1-x86 error caused by a patch commit on
android-7.1.2_r36.
Post by zhongtian xie
commitadb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6
"Stop explicitly using kCallerPasses_Ownership"
(
https://android.googlesource.com/platform/frameworks/base/+/adb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6%5E%21/)
Post by zhongtian xie
But in project external/skia 'SkStream.h' header file ,
kCallerPasses_Ownership was stop using by commit
e0a4c479456062367278bc04bc1c1ceb85de44a7;
<zapped>
Post by zhongtian xie
so we need apply the new patch on framework/base.
Yes.
Indeed we need to merge latest cm-14.1 branch.
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Harkaman
2018-02-13 19:30:47 UTC
Permalink
It looks like you have merged latest cm-14.1 branch. Is it ready to build
now?

Do we need to "At this moment you need to remove the cm kernel.mk and bt
test_vendor_lib to get a complete build:
rm -rf system/bt/vendor_libs/test_vendor_lib vendor/cm/build/tasks/kernel.mk
"?
Post by zhongtian xie
Post by zhongtian xie
Jaap Jan Meijer and zhiwei,
The reason why build cm-14.1-x86 error caused by a patch commit on
android-7.1.2_r36.
Post by zhongtian xie
commitadb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6
"Stop explicitly using kCallerPasses_Ownership"
(
https://android.googlesource.com/platform/frameworks/base/+/adb5e0ba6d532c0d52b3bf89a1dbec4e3e7a6fd6%5E%21/)
Post by zhongtian xie
But in project external/skia 'SkStream.h' header file ,
kCallerPasses_Ownership was stop using by commit
e0a4c479456062367278bc04bc1c1ceb85de44a7;
<zapped>
Post by zhongtian xie
so we need apply the new patch on framework/base.
Yes.
Indeed we need to merge latest cm-14.1 branch.
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Harkaman
2018-02-14 08:30:47 UTC
Permalink
I tried to sync last night. it showed still 7.1.2_r27 not 7.1.2_r36.
Post by Harkaman
It looks like you have merged latest cm-14.1 branch. Is it ready to
build
Post by Harkaman
now?
Yes.
Post by Harkaman
Do we need to "At this moment you need to remove the cm kernel.mk and
bt
Post by Harkaman
rm -rf system/bt/vendor_libs/test_vendor_lib
vendor/cm/build/tasks/kernel.mk"?
No.
It has been fixed since -rc1 (3 months ago).
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Harkaman
2018-02-14 08:37:21 UTC
Permalink
I tried to sync last night. it showed still 7.1.2_r29 not 7.1.2_r36.
Post by Harkaman
It looks like you have merged latest cm-14.1 branch. Is it ready to
build
Post by Harkaman
now?
Yes.
Post by Harkaman
Do we need to "At this moment you need to remove the cm kernel.mk and
bt
Post by Harkaman
rm -rf system/bt/vendor_libs/test_vendor_lib
vendor/cm/build/tasks/kernel.mk"?
No.
It has been fixed since -rc1 (3 months ago).
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Harkaman
2018-02-15 07:29:14 UTC
Permalink
thanks. It is ok now. built and work grreat. thanks again
Post by Harkaman
I tried to sync last night. it showed still 7.1.2_r29 not 7.1.2_r36.
Please sync again.
It's in the 14.1-r1 release.
--
Chih-Wei
Android-x86 project
http://www.android-x86.org
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Elmar Melcher
2018-03-06 12:00:56 UTC
Permalink
http://www.android-x86.org/releases/releasenote-cm-x86-14-1-r1 states:

repo init -u git://git.osdn.net/gitroot/android-x86/manifest -b
cm-x86-14.1-r1.xml

which results in: fatal: Couldn't find remote ref
refs/heads/cm-x86-14.1-r1.xml

-b nougat-x86 -m cm.xml works, but is it the 14.1-r1 release?
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Chris Hoffman
2018-01-18 20:34:14 UTC
Permalink
I tried this one hoping to find it would not have the same problem with
HDMI audio, but it does. :/
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
youling 257
2018-05-04 02:23:55 UTC
Permalink
if the partition is hidewon't be mount.
with this
patchhttps://github.com/LineageOS/android_system_vold/commit/167d88c5345ad6dfa9d29d682c21313851001f83
https://osdn.net/projects/android-x86/scm/git/system-vold/commits/167d88c5345ad6dfa9d29d682c21313851001f83
always auto mount ext4/f2fs partitionwhen the partition is hide.
ours Androidx86 needn't this patchsuggest revert it.
--
You received this message because you are subscribed to the Google Groups "Android-x86" group.
To unsubscribe from this group and stop receiving emails from it, send an email to android-x86+***@googlegroups.com.
To post to this group, send email to android-***@googlegroups.com.
Visit this group at https://groups.google.com/group/android-x86.
For more options, visit https://groups.google.com/d/optout.
Loading...