3.4.4: disabling irq

Discussion:

Clemens Ladisch

2012-07-09 13:54:45 UTC

(forwarded to linux-usb)

Hello,
One moment the box is runing OK.
One moment the 3.4.4 kernel decides to disable an interrupt.
Why?
Jul 8 07:43:49 box3 ntpd[5067]: parse: convert_rawdcf: INCOMPLETE DATA - time code only has 1 bits
Jul 8 07:44:53 box3 kernel: irq 18: nobody cared (try booting with the "irqpoll" option)
Jul 8 07:44:53 box3 kernel: Pid: 1501, comm: irq/18-ohci_hcd Tainted: G W 3.4.4 #1
Jul 8 07:44:53 box3 kernel: [<ffffffff81095a76>] ? __report_bad_irq+0x36/0xd0
Jul 8 07:44:53 box3 kernel: [<ffffffff81095d7f>] ? note_interrupt+0x1cf/0x220
Jul 8 07:44:53 box3 kernel: [<ffffffff810945c0>] ? irq_thread_fn+0x40/0x40
Jul 8 07:44:53 box3 kernel: [<ffffffff8109443d>] ? irq_thread+0x13d/0x180
Jul 8 07:44:53 box3 kernel: [<ffffffff81094300>] ? wake_threads_waitq+0x50/0x50
Jul 8 07:44:53 box3 kernel: [<ffffffff81052015>] ? kthread+0x85/0x90
Jul 8 07:44:53 box3 kernel: [<ffffffff81405514>] ? kernel_thread_helper+0x4/0x10
Jul 8 07:44:53 box3 kernel: [<ffffffff81051f90>] ? kthread_freezable_should_stop+0x50/0x50
Jul 8 07:44:53 box3 kernel: [<ffffffff81405510>] ? gs_change+0xb/0xb
Jul 8 07:44:53 box3 kernel: [<ffffffff810939d0>] irq_default_primary_handler threaded [<ffffffff812c7bb0>] usb_hcd_irq
Jul 8 07:44:53 box3 kernel: [<ffffffff810939d0>] irq_default_primary_handler threaded [<ffffffff812c7bb0>] usb_hcd_irq
Jul 8 07:44:53 box3 kernel: [<ffffffff810939d0>] irq_default_primary_handler threaded [<ffffffff812c7bb0>] usb_hcd_irq
Jul 8 07:44:53 box3 kernel: Disabling IRQ #18
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 0 has error -114
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 1 has error -18
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 2 has error -18
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 3 has error -18
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 4 has error -18
Jul 8 07:44:53 box3 kernel: pwc: Iso frame 5 has error -18
(etc; many more of the pwc messages)
Kind regards,
Udo
Hi,
Am not sure where to start with getting help on an issue.
Since buying my motherboard i have found the usb ports are pretty
unstable, and some devices work on usb2 some on usb3, after a while i
managed to work out which will work where and it's reasonably stable
now.
Am on kernel 3.2.16 and tonight i thought i would try 3.4.4, it's all
been compiled and seemed fine until i ran mythtv and couldn't get a
smooth picture, then the tuner stopped responding and when looking in
to the logs it appears IRQ18 assigned to the usb chipset gets disabled
from what i can tell, it also causes a crash.
Motherboard is Gigabyte GA-990XA-UD3
CPU is AMD Bulldozer 6 Core version
I'll attach the 2 dmesg logs, one from 3.2 and other from 3.4,
hopefully someone can see what's wrong, there is a suggestion to boot
with irqpoll, but really wanted someone's opinion on this.
Regards,
Simon

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.4-1-custom (***@tv-pc) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Sun Jul 8 16:39:08 BST 2012
[ 0.000000] Command line: root=/dev/sda2 ro initrd=../initramfs-linux-custom.img BOOT_IMAGE=../vmlinuz-linux-custom
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000098800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfda0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfda0000 - 00000000bfdd1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdd1000 - 00000000bfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000043f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. GA-990XA-UD3/GA-990XA-UD3, BIOS F9 10/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000BFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfda0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f4b30] f4b30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000093000] 93000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfda0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfc00000 page 2M
[ 0.000000] 00bfc00000 - 00bfda0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfda0000 @ 1fffd000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 043f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 43f000000 @ bfd9e000-bfda0000
[ 0.000000] RAMDISK: 7fd29000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f6a50 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000bfdd1000 00048 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000bfdd1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000bfdd1100 07A4B (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfda0000 00040
[ 0.000000] ACPI: MSDM 00000000bfdd8c40 00055 (v03 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: HPET 00000000bfdd8cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000bfdd8d00 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000bfdd8d80 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000bfdd8df0 00202 (v01 GBT GBT B0 5455312E BG?? 53450101)
[ 0.000000] ACPI: APIC 00000000bfdd8b80 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000bfdd9000 06207 (v01 MATS RCM 80000001 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfddf280 01158 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000043f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
[ 0.000000] NODE_DATA [000000043effc000 - 000000043effffff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042e600000-ffff88043e5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0043f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000098
[ 0.000000] 0: 0x00000100 -> 0x000bfda0
[ 0.000000] 0: 0x00100000 -> 0x0043f000
[ 0.000000] On node 0 totalpages: 4189480
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3907 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 765408 pages, LIFO batch:31
[ 0.000000] Normal zone: 53184 pages used for memmap
[ 0.000000] Normal zone: 3350592 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfda0000 - 00000000bfdd1000
[ 0.000000] PM: Registered nosave memory: 00000000bfdd1000 - 00000000bfe00000
[ 0.000000] PM: Registered nosave memory: 00000000bfe00000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88043ec00000 s82048 r8192 d24448 u262144
[ 0.000000] pcpu-alloc: s82048 r8192 d24448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4119907
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 ro initrd=../initramfs-linux-custom.img BOOT_IMAGE=../vmlinuz-linux-custom
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ b4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000
[ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000
[ 0.000000] Memory: 16349224k/17809408k available (4278k kernel code, 1051488k absent, 408696k reserved, 4565k data, 720k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 3322.127 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6646.09 BogoMIPS (lpj=11073756)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000030] Security Framework initialized
[ 0.000033] AppArmor: AppArmor disabled by boot time parameter
[ 0.001135] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.005136] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006855] Mount-cache hash table entries: 256
[ 0.007031] Initializing cgroup subsys cpuacct
[ 0.007033] Initializing cgroup subsys memory
[ 0.007041] Initializing cgroup subsys devices
[ 0.007042] Initializing cgroup subsys freezer
[ 0.007044] Initializing cgroup subsys net_cls
[ 0.007045] Initializing cgroup subsys blkio
[ 0.007067] tseg: 00bff00000
[ 0.007069] CPU: Physical Processor ID: 0
[ 0.007070] CPU: Processor Core ID: 0
[ 0.007071] mce: CPU supports 7 MCE banks
[ 0.007077] LVT offset 1 assigned for vector 0xf9
[ 0.007748] ACPI: Core revision 20120320
[ 0.056144] ftrace: allocating 17054 entries in 67 pages
[ 0.066001] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.098983] CPU0: AMD FX(tm)-6100 Six-Core Processor stepping 02
[ 0.203517] Performance Events: AMD Family 15h PMU driver.
[ 0.203521] ... version: 0
[ 0.203523] ... bit width: 48
[ 0.203524] ... generic registers: 6
[ 0.203526] ... value mask: 0000ffffffffffff
[ 0.203527] ... max period: 00007fffffffffff
[ 0.203529] ... fixed-purpose events: 0
[ 0.203530] ... event mask: 000000000000003f
[ 0.223560] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.243508] Booting Node 0, Processors #1
[ 0.257183] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.270172] #2
[ 0.283288] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.293470] #3
[ 0.306586] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.316782] #4
[ 0.329898] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.340098] #5
[ 0.353226] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.353251] Brought up 6 CPUs
[ 0.353253] Total of 6 processors activated (39881.58 BogoMIPS).
[ 0.364074] devtmpfs: initialized
[ 0.366531] PM: Registering ACPI NVS region [mem 0xbfda0000-0xbfdd0fff] (200704 bytes)
[ 0.367250] dummy:
[ 0.367292] NET: Registered protocol family 16
[ 0.367438] ACPI: bus type pci registered
[ 0.367493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.367496] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.394422] PCI: Using configuration type 1 for base access
[ 0.395193] bio: create slab <bio-0> at 0
[ 0.395247] ACPI: Added _OSI(Module Device)
[ 0.395249] ACPI: Added _OSI(Processor Device)
[ 0.395250] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.395252] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.396218] ACPI: EC: Look up EC in DSDT
[ 0.404617] ACPI Warning: Incorrect checksum in table [TAMG] - 0x45, should be 0x44 (20120320/tbutils-323)
[ 0.404759] ACPI: Interpreter enabled
[ 0.404763] ACPI: (supports S0 S3 S4 S5)
[ 0.404782] ACPI: Using IOAPIC for interrupt routing
[ 0.502093] ACPI: No dock devices found.
[ 0.502101] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.502233] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.502436] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.502442] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.502448] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.502453] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.502458] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.502463] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.502547] PCI host bridge to bus 0000:00
[ 0.502552] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.502558] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.502563] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.502568] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.502573] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.502578] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.502601] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.502624] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
[ 0.502718] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.502779] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.502808] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.502868] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.502893] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[ 0.502953] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.502982] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.503041] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.503067] pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
[ 0.503126] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.503163] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.503186] pci 0000:00:11.0: reg 10: [io 0xff00-0xff07]
[ 0.503198] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03]
[ 0.503210] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07]
[ 0.503222] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.503234] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.503247] pci 0000:00:11.0: reg 24: [mem 0xfdfff000-0xfdfff3ff]
[ 0.503321] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.503338] pci 0000:00:12.0: reg 10: [mem 0xfdffe000-0xfdffefff]
[ 0.503419] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.503442] pci 0000:00:12.2: reg 10: [mem 0xfdffd000-0xfdffd0ff]
[ 0.503529] pci 0000:00:12.2: supports D1 D2
[ 0.503533] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.503562] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.503579] pci 0000:00:13.0: reg 10: [mem 0xfdffc000-0xfdffcfff]
[ 0.503662] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.503684] pci 0000:00:13.2: reg 10: [mem 0xfdffb000-0xfdffb0ff]
[ 0.503771] pci 0000:00:13.2: supports D1 D2
[ 0.503775] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.503805] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.503890] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[ 0.503915] pci 0000:00:14.2: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.503986] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.504006] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.504088] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.504137] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.504153] pci 0000:00:14.5: reg 10: [mem 0xfdffa000-0xfdffafff]
[ 0.504235] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.504318] pci 0000:00:15.0: supports D1 D2
[ 0.504343] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.504359] pci 0000:00:16.0: reg 10: [mem 0xfdff9000-0xfdff9fff]
[ 0.504437] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.504459] pci 0000:00:16.2: reg 10: [mem 0xfdff8000-0xfdff80ff]
[ 0.504546] pci 0000:00:16.2: supports D1 D2
[ 0.504550] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.504581] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.504624] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.504658] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.504692] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.504735] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.504771] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.504863] pci 0000:01:00.0: [10de:0a20] type 00 class 0x030000
[ 0.504879] pci 0000:01:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
[ 0.504894] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.504910] pci 0000:01:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.504922] pci 0000:01:00.0: reg 24: [io 0xef00-0xef7f]
[ 0.504934] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.505009] pci 0000:01:00.1: [10de:0be2] type 00 class 0x040300
[ 0.505024] pci 0000:01:00.1: reg 10: [mem 0xfcffc000-0xfcffffff]
[ 0.509966] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.509975] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.509982] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.509990] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.510049] pci 0000:02:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.510072] pci 0000:02:00.0: reg 10: [mem 0xfd4f8000-0xfd4fffff 64bit]
[ 0.510164] pci 0000:02:00.0: supports D1 D2
[ 0.510168] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516622] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.516631] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.516637] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.516645] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.516709] pci 0000:03:00.0: [9710:9990] type 00 class 0x0c0310
[ 0.516731] pci 0000:03:00.0: reg 10: [mem 0xfddff000-0xfddfffff]
[ 0.516863] pci 0000:03:00.0: supports D1 D2
[ 0.516867] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.516915] pci 0000:03:00.1: [9710:9990] type 00 class 0x0c0320
[ 0.516936] pci 0000:03:00.1: reg 10: [mem 0xfddfe000-0xfddfefff]
[ 0.517071] pci 0000:03:00.1: supports D1 D2
[ 0.517075] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517121] pci 0000:03:00.2: [9710:9990] type 00 class 0x0c0310
[ 0.517142] pci 0000:03:00.2: reg 10: [mem 0xfddfd000-0xfddfdfff]
[ 0.517272] pci 0000:03:00.2: supports D1 D2
[ 0.517276] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517322] pci 0000:03:00.3: [9710:9990] type 00 class 0x0c0320
[ 0.517343] pci 0000:03:00.3: reg 10: [mem 0xfddfc000-0xfddfcfff]
[ 0.517473] pci 0000:03:00.3: supports D1 D2
[ 0.517477] pci 0000:03:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517527] pci 0000:03:00.4: [9710:9990] type 00 class 0x0c0310
[ 0.517547] pci 0000:03:00.4: reg 10: [mem 0xfddfb000-0xfddfbfff]
[ 0.517678] pci 0000:03:00.4: supports D1 D2
[ 0.517682] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517727] pci 0000:03:00.5: [9710:9990] type 00 class 0x0c0320
[ 0.517748] pci 0000:03:00.5: reg 10: [mem 0xfddfa000-0xfddfafff]
[ 0.517879] pci 0000:03:00.5: supports D1 D2
[ 0.517883] pci 0000:03:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.517928] pci 0000:03:00.6: [9710:9990] type 00 class 0x0c0310
[ 0.517949] pci 0000:03:00.6: reg 10: [mem 0xfddf9000-0xfddf9fff]
[ 0.518080] pci 0000:03:00.6: supports D1 D2
[ 0.518084] pci 0000:03:00.6: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.518129] pci 0000:03:00.7: [9710:9990] type 00 class 0x0c0320
[ 0.518150] pci 0000:03:00.7: reg 10: [mem 0xfddf8000-0xfddf8fff]
[ 0.518280] pci 0000:03:00.7: supports D1 D2
[ 0.518284] pci 0000:03:00.7: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.523319] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.523327] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.523334] pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.523342] pci 0000:00:05.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.523402] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.523420] pci 0000:04:00.0: reg 10: [io 0xbe00-0xbeff]
[ 0.523448] pci 0000:04:00.0: reg 18: [mem 0xfdaff000-0xfdafffff 64bit pref]
[ 0.523468] pci 0000:04:00.0: reg 20: [mem 0xfdaf8000-0xfdafbfff 64bit pref]
[ 0.523539] pci 0000:04:00.0: supports D1 D2
[ 0.523544] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.529945] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.529953] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.529960] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.529968] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.530027] pci 0000:05:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.530049] pci 0000:05:00.0: reg 10: [mem 0xfd8f8000-0xfd8fffff 64bit]
[ 0.530141] pci 0000:05:00.0: supports D1 D2
[ 0.530145] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.536605] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.536614] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.536620] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.536628] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.536671] pci 0000:06:06.0: [1106:3038] type 00 class 0x0c0300
[ 0.536736] pci 0000:06:06.0: reg 20: [io 0x9f00-0x9f1f]
[ 0.536796] pci 0000:06:06.0: supports D1 D2
[ 0.536800] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot
[ 0.536828] pci 0000:06:06.1: [1106:3038] type 00 class 0x0c0300
[ 0.536893] pci 0000:06:06.1: reg 20: [io 0x9e00-0x9e1f]
[ 0.536956] pci 0000:06:06.1: supports D1 D2
[ 0.536961] pci 0000:06:06.1: PME# supported from D0 D1 D2 D3hot
[ 0.536992] pci 0000:06:06.2: [1106:3104] type 00 class 0x0c0320
[ 0.537017] pci 0000:06:06.2: reg 10: [mem 0xfafff000-0xfafff0ff]
[ 0.537116] pci 0000:06:06.2: supports D1 D2
[ 0.537120] pci 0000:06:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.537159] pci 0000:06:07.0: [14f1:8800] type 00 class 0x040000
[ 0.537186] pci 0000:06:07.0: reg 10: [mem 0xf8000000-0xf8ffffff]
[ 0.537321] pci 0000:06:07.2: [14f1:8802] type 00 class 0x048000
[ 0.537345] pci 0000:06:07.2: reg 10: [mem 0xf9000000-0xf9ffffff]
[ 0.537484] pci 0000:06:0e.0: [1106:3044] type 00 class 0x0c0010
[ 0.537509] pci 0000:06:0e.0: reg 10: [mem 0xfaffe000-0xfaffe7ff]
[ 0.537525] pci 0000:06:0e.0: reg 14: [io 0x9d00-0x9d7f]
[ 0.537621] pci 0000:06:0e.0: supports D2
[ 0.537625] pci 0000:06:0e.0: PME# supported from D2 D3hot D3cold
[ 0.537669] pci 0000:00:14.4: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.537676] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.537683] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfaffffff]
[ 0.537691] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
[ 0.537696] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.537702] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.537707] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.537713] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.537718] pci 0000:00:14.4: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.537724] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.537780] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.537789] pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
[ 0.537795] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.537805] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.537837] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.538513] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.538610] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.538752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.538829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.538900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.538979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.539049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.539131] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.539138] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.539142] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.571361] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571419] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571474] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571528] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571582] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571634] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571686] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571738] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0
[ 0.571878] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.571891] vgaarb: loaded
[ 0.571893] vgaarb: bridge control possible 0000:01:00.0
[ 0.571963] PCI: Using ACPI for IRQ routing
[ 0.578310] PCI: pci_cache_line_size set to 64 bytes
[ 0.578319] pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit]
[ 0.578439] reserve RAM buffer: 0000000000098800 - 000000000009ffff
[ 0.578441] reserve RAM buffer: 00000000bfda0000 - 00000000bfffffff
[ 0.578443] reserve RAM buffer: 000000043f000000 - 000000043fffffff
[ 0.578525] NetLabel: Initializing
[ 0.578526] NetLabel: domain hash size = 128
[ 0.578527] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.578538] NetLabel: unlabeled traffic allowed by default
[ 0.578556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.578559] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.580609] Switching to clocksource hpet
[ 0.586476] pnp: PnP ACPI init
[ 0.586489] ACPI: bus type pnp registered
[ 0.586564] pnp 00:00: [bus 00-ff]
[ 0.586567] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.586569] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.586571] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.586573] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.586575] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.586577] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.586579] pnp 00:00: [mem 0xc0000000-0xfebfffff window]
[ 0.586617] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.586628] pnp 00:01: [io 0x0010-0x001f]
[ 0.586629] pnp 00:01: [io 0x0022-0x003f]
[ 0.586631] pnp 00:01: [io 0x0044-0x004d]
[ 0.586633] pnp 00:01: [io 0x0050-0x005f]
[ 0.586635] pnp 00:01: [io 0x0062-0x0063]
[ 0.586636] pnp 00:01: [io 0x0065-0x006f]
[ 0.586638] pnp 00:01: [io 0x0074-0x007f]
[ 0.586640] pnp 00:01: [io 0x0091-0x0093]
[ 0.586641] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.586643] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.586645] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.586646] pnp 00:01: [io 0x0220-0x0225]
[ 0.586648] pnp 00:01: [io 0x0290-0x0294]
[ 0.586705] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.586708] system 00:01: [io 0x0220-0x0225] has been reserved
[ 0.586711] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.586714] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.680847] pnp 00:02: [io 0x0900-0x091f]
[ 0.680853] pnp 00:02: [io 0x0228-0x022f]
[ 0.680858] pnp 00:02: [io 0x040b]
[ 0.680862] pnp 00:02: [io 0x04d6]
[ 0.680870] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.680874] pnp 00:02: [io 0x0c14]
[ 0.680878] pnp 00:02: [io 0x0c50-0x0c52]
[ 0.680882] pnp 00:02: [io 0x0c6c-0x0c6d]
[ 0.680886] pnp 00:02: [io 0x0c6f]
[ 0.680889] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.680893] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.680897] pnp 00:02: [io 0x0cd4-0x0cdf]
[ 0.680901] pnp 00:02: [io 0x0800-0x08fe]
[ 0.680905] pnp 00:02: [io 0x0a10-0x0a17]
[ 0.680908] pnp 00:02: [io 0x0b00-0x0b0f]
[ 0.680912] pnp 00:02: [io 0x0b10-0x0b1f]
[ 0.680916] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.680921] pnp 00:02: [mem 0x00000000-0x00000fff window]
[ 0.680926] pnp 00:02: [mem 0xfee00400-0xfee00fff window]
[ 0.680937] pnp 00:02: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.681006] pnp 00:02: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0007ffff pref]
[ 0.681114] system 00:02: [io 0x0900-0x091f] has been reserved
[ 0.681121] system 00:02: [io 0x0228-0x022f] has been reserved
[ 0.681127] system 00:02: [io 0x040b] has been reserved
[ 0.681132] system 00:02: [io 0x04d6] has been reserved
[ 0.681137] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.681142] system 00:02: [io 0x0c14] has been reserved
[ 0.681147] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 0.681152] system 00:02: [io 0x0c6c-0x0c6d] has been reserved
[ 0.681157] system 00:02: [io 0x0c6f] has been reserved
[ 0.681162] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.681167] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.681172] system 00:02: [io 0x0cd4-0x0cdf] has been reserved
[ 0.681177] system 00:02: [io 0x0800-0x08fe] has been reserved
[ 0.681182] system 00:02: [io 0x0a10-0x0a17] has been reserved
[ 0.681188] system 00:02: [io 0x0b00-0x0b0f] has been reserved
[ 0.681193] system 00:02: [io 0x0b10-0x0b1f] has been reserved
[ 0.681198] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.681205] system 00:02: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.681212] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.681421] pnp 00:03: [dma 4]
[ 0.681425] pnp 00:03: [io 0x0000-0x000f]
[ 0.681429] pnp 00:03: [io 0x0080-0x0090]
[ 0.681433] pnp 00:03: [io 0x0094-0x009f]
[ 0.681437] pnp 00:03: [io 0x00c0-0x00df]
[ 0.681506] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.681623] pnp 00:04: [irq 0 disabled]
[ 0.681636] pnp 00:04: [irq 8]
[ 0.681641] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.681707] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.681769] pnp 00:05: [io 0x0070-0x0073]
[ 0.681838] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.681857] pnp 00:06: [io 0x0061]
[ 0.681924] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.681943] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.681951] pnp 00:07: [irq 13]
[ 0.682017] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.682620] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.682629] pnp 00:08: [irq 4]
[ 0.682755] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.682895] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.683042] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.683050] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.683416] pnp 00:0a: [mem 0x000d4200-0x000d7fff]
[ 0.683421] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.683425] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.683430] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.683437] pnp 00:0a: [mem 0xbfda0000-0xbfdfffff]
[ 0.683441] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.683446] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.683450] pnp 00:0a: [mem 0x00100000-0xbfd9ffff]
[ 0.683454] pnp 00:0a: [mem 0xbfe00000-0xbfefffff]
[ 0.683459] pnp 00:0a: [mem 0xbff00000-0xbfffffff]
[ 0.683463] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.683467] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.683472] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 0.683480] pnp 00:0a: disabling [mem 0x000d4200-0x000d7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683488] pnp 00:0a: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683496] pnp 00:0a: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683504] pnp 00:0a: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683511] pnp 00:0a: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683519] pnp 00:0a: disabling [mem 0x00100000-0xbfd9ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
[ 0.683710] system 00:0a: [mem 0xbfda0000-0xbfdfffff] could not be reserved
[ 0.683717] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.683722] system 00:0a: [mem 0xbfe00000-0xbfefffff] has been reserved
[ 0.683728] system 00:0a: [mem 0xbff00000-0xbfffffff] could not be reserved
[ 0.683734] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.683740] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.683746] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.683753] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.683797] pnp: PnP ACPI: found 11 devices
[ 0.683801] ACPI: ACPI bus type pnp unregistered
[ 0.692508] pci 0000:01:00.0: BAR 6: assigned [mem 0xd0000000-0xd007ffff pref]
[ 0.692515] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.692521] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.692528] pci 0000:00:02.0: bridge window [mem 0xfb000000-0xfcffffff]
[ 0.692535] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.692543] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.692548] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.692554] pci 0000:00:04.0: bridge window [mem 0xfd400000-0xfd4fffff]
[ 0.692561] pci 0000:00:04.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.692570] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.692575] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 0.692581] pci 0000:00:05.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.692587] pci 0000:00:05.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.692595] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[ 0.692600] pci 0000:00:09.0: bridge window [io 0xb000-0xbfff]
[ 0.692606] pci 0000:00:09.0: bridge window [mem 0xfdb00000-0xfdbfffff]
[ 0.692612] pci 0000:00:09.0: bridge window [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.692620] pci 0000:00:0a.0: PCI bridge to [bus 05-05]
[ 0.692625] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.692631] pci 0000:00:0a.0: bridge window [mem 0xfd800000-0xfd8fffff]
[ 0.692637] pci 0000:00:0a.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.692646] pci 0000:00:14.4: PCI bridge to [bus 06-06]
[ 0.692651] pci 0000:00:14.4: bridge window [io 0x9000-0x9fff]
[ 0.692659] pci 0000:00:14.4: bridge window [mem 0xf8000000-0xfaffffff]
[ 0.692666] pci 0000:00:14.4: bridge window [mem 0xfd900000-0xfd9fffff pref]
[ 0.692675] pci 0000:00:15.0: PCI bridge to [bus 07-07]
[ 0.692680] pci 0000:00:15.0: bridge window [io 0x8000-0x8fff]
[ 0.692687] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.692694] pci 0000:00:15.0: bridge window [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.692765] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.692770] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.692775] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.692780] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.692785] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.692789] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.692794] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.692799] pci_bus 0000:01: resource 1 [mem 0xfb000000-0xfcffffff]
[ 0.692804] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref]
[ 0.692809] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.692813] pci_bus 0000:02: resource 1 [mem 0xfd400000-0xfd4fffff]
[ 0.692818] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.692823] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.692828] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.692833] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.692838] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.692842] pci_bus 0000:04: resource 1 [mem 0xfdb00000-0xfdbfffff]
[ 0.692847] pci_bus 0000:04: resource 2 [mem 0xfda00000-0xfdafffff 64bit pref]
[ 0.692853] pci_bus 0000:05: resource 0 [io 0xa000-0xafff]
[ 0.692857] pci_bus 0000:05: resource 1 [mem 0xfd800000-0xfd8fffff]
[ 0.692862] pci_bus 0000:05: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.692867] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff]
[ 0.692872] pci_bus 0000:06: resource 1 [mem 0xf8000000-0xfaffffff]
[ 0.692877] pci_bus 0000:06: resource 2 [mem 0xfd900000-0xfd9fffff pref]
[ 0.692881] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.692886] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.692890] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.692895] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.692900] pci_bus 0000:06: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.692905] pci_bus 0000:06: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.692910] pci_bus 0000:07: resource 0 [io 0x8000-0x8fff]
[ 0.692914] pci_bus 0000:07: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.692919] pci_bus 0000:07: resource 2 [mem 0xfd600000-0xfd6fffff 64bit pref]
[ 0.692984] NET: Registered protocol family 2
[ 0.693759] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.696487] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.699498] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.699844] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.699849] TCP: reno registered
[ 0.699898] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.700039] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.700251] NET: Registered protocol family 1
[ 0.980534] pci 0000:01:00.0: Boot video device
[ 1.193849] PCI: CLS 64 bytes, default 64
[ 1.193929] Unpacking initramfs...
[ 1.332646] Freeing initrd memory: 2904k freed
[ 1.334860] PCI-DMA: Disabling AGP.
[ 1.335019] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 1.335023] PCI-DMA: using GART IOMMU.
[ 1.335029] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.344641] LVT offset 0 assigned for vector 0x400
[ 1.344677] perf: AMD IBS detected (0x000000ff)
[ 1.344996] audit: initializing netlink socket (disabled)
[ 1.345026] type=2000 audit(1341767257.186:1): initialized
[ 1.346517] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.352006] VFS: Disk quotas dquot_6.5.2
[ 1.352102] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.352279] msgmni has been set to 32066
[ 1.352574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.352625] io scheduler noop registered
[ 1.352629] io scheduler deadline registered
[ 1.352740] io scheduler cfq registered (default)
[ 1.353398] GHES: HEST is not enabled!
[ 1.353519] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.374060] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.394776] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.394973] Linux agpgart interface v0.103
[ 1.395029] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.428691] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 1.428693] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.676649] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.676856] mousedev: PS/2 mouse device common for all mice
[ 1.676950] rtc_cmos 00:05: RTC can wake from S4
[ 1.677126] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.677153] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.677170] cpuidle: using governor ladder
[ 1.677175] cpuidle: using governor menu
[ 1.677324] TCP: cubic registered
[ 1.677328] NET: Registered protocol family 17
[ 1.677339] Registering the dns_resolver key type
[ 1.677559] PM: Hibernation image not present or could not be loaded.
[ 1.677571] registered taskstats version 1
[ 1.679465] rtc_cmos 00:05: setting system clock to 2012-07-08 17:07:38 UTC (1341767258)
[ 1.679541] Initializing network drop monitor service
[ 1.830872] Freeing unused kernel memory: 720k freed
[ 1.831140] Write protecting the kernel read-only data: 8192k
[ 1.849515] Freeing unused kernel memory: 1848k freed
[ 1.856902] Freeing unused kernel memory: 676k freed
[ 1.872457] udevd[61]: starting version 185
[ 1.931585] usbcore: registered new interface driver usbfs
[ 1.931729] usbcore: registered new interface driver hub
[ 1.931786] usbcore: registered new device driver usb
[ 1.933938] SCSI subsystem initialized
[ 1.934052] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.934114] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.934161] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.934176] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.934219] QUIRK: Enable AMD PLL fix
[ 1.934230] ehci_hcd 0000:00:12.2: debug port 1
[ 1.934253] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfdffd000
[ 1.935666] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.935690] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.935785] xhci_hcd 0000:02:00.0: irq 16, io mem 0xfd4f8000
[ 1.935847] xhci_hcd 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.936069] xHCI xhci_add_endpoint called for root hub
[ 1.936073] xHCI xhci_check_bandwidth called for root hub
[ 1.936145] hub 2-0:1.0: USB hub found
[ 1.936153] hub 2-0:1.0: 2 ports detected
[ 1.936633] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.936644] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 1.936804] xHCI xhci_add_endpoint called for root hub
[ 1.936807] xHCI xhci_check_bandwidth called for root hub
[ 1.937093] hub 3-0:1.0: USB hub found
[ 1.937101] hub 3-0:1.0: 2 ports detected
[ 1.937680] libata version 3.00 loaded.
[ 1.942992] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.943457] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.943644] hub 1-0:1.0: USB hub found
[ 1.943652] hub 1-0:1.0: 5 ports detected
[ 1.943854] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.943863] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.943870] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.943888] ehci_hcd 0000:00:13.2: debug port 1
[ 1.943901] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfdffb000
[ 1.952972] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.953334] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.953488] hub 4-0:1.0: USB hub found
[ 1.953494] hub 4-0:1.0: 5 ports detected
[ 1.953557] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 5
[ 1.953600] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.953609] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 6
[ 1.953618] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.953645] ehci_hcd 0000:00:16.2: debug port 1
[ 1.953652] xhci_hcd 0000:05:00.0: irq 18, io mem 0xfd8f8000
[ 1.953661] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfdff8000
[ 1.953706] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[ 1.953730] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.953781] uhci_hcd 0000:06:06.0: UHCI Host Controller
[ 1.953967] xHCI xhci_add_endpoint called for root hub
[ 1.953970] xHCI xhci_check_bandwidth called for root hub
[ 1.953999] hub 5-0:1.0: USB hub found
[ 1.954006] hub 5-0:1.0: 2 ports detected
[ 1.954229] uhci_hcd 0000:06:06.0: new USB bus registered, assigned bus number 7
[ 1.954246] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.954254] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[ 1.954264] uhci_hcd 0000:06:06.0: irq 20, io base 0x00009f00
[ 1.954489] xHCI xhci_add_endpoint called for root hub
[ 1.954491] xHCI xhci_check_bandwidth called for root hub
[ 1.954524] hub 8-0:1.0: USB hub found
[ 1.954532] hub 8-0:1.0: 2 ports detected
[ 1.955229] hub 7-0:1.0: USB hub found
[ 1.955235] hub 7-0:1.0: 2 ports detected
[ 1.955403] uhci_hcd 0000:06:06.1: UHCI Host Controller
[ 1.955413] uhci_hcd 0000:06:06.1: new USB bus registered, assigned bus number 9
[ 1.955450] uhci_hcd 0000:06:06.1: irq 21, io base 0x00009e00
[ 1.955573] hub 9-0:1.0: USB hub found
[ 1.955579] hub 9-0:1.0: 2 ports detected
[ 1.963012] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.963168] hub 6-0:1.0: USB hub found
[ 1.963173] hub 6-0:1.0: 4 ports detected
[ 1.963337] ahci 0000:00:11.0: version 3.0
[ 1.963363] ehci_hcd 0000:03:00.1: EHCI Host Controller
[ 1.963388] ehci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 10
[ 1.963408] ehci_hcd 0000:03:00.1: applying MosChip frame-index workaround
[ 1.963454] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.963458] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.964185] scsi0 : ahci
[ 1.964262] scsi1 : ahci
[ 1.964329] scsi2 : ahci
[ 1.964395] scsi3 : ahci
[ 1.964460] scsi4 : ahci
[ 1.964526] scsi5 : ahci
[ 1.964669] ata1: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff100 irq 19
[ 1.964672] ata2: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff180 irq 19
[ 1.964675] ata3: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff200 irq 19
[ 1.964678] ata4: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff280 irq 19
[ 1.964681] ata5: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff300 irq 19
[ 1.964684] ata6: SATA max UDMA/133 abar ***@0xfdfff000 port 0xfdfff380 irq 19
[ 1.964729] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.964741] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 11
[ 1.964762] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfdffe000
[ 1.986318] ehci_hcd 0000:03:00.1: irq 17, io mem 0xfddfe000
[ 1.996311] ehci_hcd 0000:03:00.1: USB 2.0 started, EHCI 1.00
[ 1.996577] hub 10-0:1.0: USB hub found
[ 1.996585] hub 10-0:1.0: 1 port detected
[ 1.996820] ehci_hcd 0000:03:00.3: EHCI Host Controller
[ 1.996837] ehci_hcd 0000:03:00.3: new USB bus registered, assigned bus number 12
[ 1.996863] ehci_hcd 0000:03:00.3: applying MosChip frame-index workaround
[ 2.019607] ehci_hcd 0000:03:00.3: irq 18, io mem 0xfddfc000
[ 2.020567] hub 11-0:1.0: USB hub found
[ 2.020578] hub 11-0:1.0: 5 ports detected
[ 2.020854] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.020871] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 13
[ 2.020898] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfdffc000
[ 2.029615] ehci_hcd 0000:03:00.3: USB 2.0 started, EHCI 1.00
[ 2.029871] hub 12-0:1.0: USB hub found
[ 2.029880] hub 12-0:1.0: 1 port detected
[ 2.030133] ehci_hcd 0000:03:00.5: EHCI Host Controller
[ 2.030152] ehci_hcd 0000:03:00.5: new USB bus registered, assigned bus number 14
[ 2.030176] ehci_hcd 0000:03:00.5: applying MosChip frame-index workaround
[ 2.052956] ehci_hcd 0000:03:00.5: irq 19, io mem 0xfddfa000
[ 2.062913] ehci_hcd 0000:03:00.5: USB 2.0 started, EHCI 1.00
[ 2.063166] hub 14-0:1.0: USB hub found
[ 2.063175] hub 14-0:1.0: 1 port detected
[ 2.063351] ehci_hcd 0000:03:00.7: EHCI Host Controller
[ 2.063367] ehci_hcd 0000:03:00.7: new USB bus registered, assigned bus number 15
[ 2.063392] ehci_hcd 0000:03:00.7: applying MosChip frame-index workaround
[ 2.077141] hub 13-0:1.0: USB hub found
[ 2.077151] hub 13-0:1.0: 5 ports detected
[ 2.077463] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.077479] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 16
[ 2.077504] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfdffa000
[ 2.086243] ehci_hcd 0000:03:00.7: irq 16, io mem 0xfddf8000
[ 2.096220] ehci_hcd 0000:03:00.7: USB 2.0 started, EHCI 1.00
[ 2.096457] hub 15-0:1.0: USB hub found
[ 2.096465] hub 15-0:1.0: 1 port detected
[ 2.096782] ehci_hcd 0000:06:06.2: EHCI Host Controller
[ 2.096798] ehci_hcd 0000:06:06.2: new USB bus registered, assigned bus number 17
[ 2.096863] ehci_hcd 0000:06:06.2: irq 22, io mem 0xfafff000
[ 2.106217] ehci_hcd 0000:06:06.2: USB 2.0 started, EHCI 1.00
[ 2.106466] hub 17-0:1.0: USB hub found
[ 2.106474] hub 17-0:1.0: 4 ports detected
[ 2.137129] hub 16-0:1.0: USB hub found
[ 2.137141] hub 16-0:1.0: 2 ports detected
[ 2.137477] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 2.137494] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 18
[ 2.137526] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfdff9000
[ 2.193744] hub 18-0:1.0: USB hub found
[ 2.193755] hub 18-0:1.0: 4 ports detected
[ 2.194082] ohci_hcd 0000:03:00.0: OHCI Host Controller
[ 2.194126] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 19
[ 2.194149] ohci_hcd 0000:03:00.0: irq 17, io mem 0xfddff000
[ 2.242793] usb 2-1: new high-speed USB device number 2 using xhci_hcd
[ 2.250370] hub 19-0:1.0: USB hub found
[ 2.250382] hub 19-0:1.0: 1 port detected
[ 2.250620] ohci_hcd 0000:03:00.2: OHCI Host Controller
[ 2.250636] ohci_hcd 0000:03:00.2: new USB bus registered, assigned bus number 20
[ 2.250659] ohci_hcd 0000:03:00.2: irq 18, io mem 0xfddfd000
[ 2.282765] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.282864] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.282931] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.306990] hub 20-0:1.0: USB hub found
[ 2.307002] hub 20-0:1.0: 1 port detected
[ 2.307304] ohci_hcd 0000:03:00.4: OHCI Host Controller
[ 2.307320] ohci_hcd 0000:03:00.4: new USB bus registered, assigned bus number 21
[ 2.307347] ohci_hcd 0000:03:00.4: irq 19, io mem 0xfddfb000
[ 2.346038] Refined TSC clocksource calibration: 3322.134 MHz.
[ 2.346051] Switching to clocksource tsc
[ 2.363603] hub 21-0:1.0: USB hub found
[ 2.363613] hub 21-0:1.0: 1 port detected
[ 2.363912] ohci_hcd 0000:03:00.6: OHCI Host Controller
[ 2.363928] ohci_hcd 0000:03:00.6: new USB bus registered, assigned bus number 22
[ 2.363952] ohci_hcd 0000:03:00.6: irq 16, io mem 0xfddf9000
[ 2.366033] usb 2-2: new low-speed USB device number 3 using xhci_hcd
[ 2.416660] usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.416671] usb 2-2: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.420196] hub 22-0:1.0: USB hub found
[ 2.420207] hub 22-0:1.0: 1 port detected
[ 2.449303] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.449342] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.449388] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.449736] ata1.00: ATA-9: M4-CT064M4SSD2, 0309, max UDMA/100
[ 2.449742] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.450157] ata1.00: configured for UDMA/100
[ 2.450370] scsi 0:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0309 PQ: 0 ANSI: 5
[ 2.452084] ata3.00: HPA detected: current 2930275055, native 2930277168
[ 2.452185] ata3.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
[ 2.452192] ata3.00: 2930275055 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.452757] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133
[ 2.452764] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.455192] ata3.00: configured for UDMA/133
[ 2.456801] ata2.00: configured for UDMA/133
[ 2.456981] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5
[ 2.457404] scsi 2:0:0:0: Direct-Access ATA WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
[ 2.470706] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.470768] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.470775] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.470833] sd 2:0:0:0: [sdc] 2930275055 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 2.470905] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.470912] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.470919] sd 0:0:0:0: [sda] Write Protect is off
[ 2.470930] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.470953] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.470960] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.470984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.470993] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.471015] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.471992] sda: sda1 sda2
[ 2.474752] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.525293] sdb: sdb1 sdb2 sdb3
[ 2.525818] sdc: sdc1 sdc2 < sdc5 >
[ 2.526120] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.527024] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 2.962223] usb 10-1: new high-speed USB device number 2 using ehci_hcd
[ 2.971964] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.086715] usb 10-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 3.192026] usb 12-1: new high-speed USB device number 2 using ehci_hcd
[ 3.234403] udevd[163]: starting version 185
[ 3.262844] FS-Cache: Loaded
[ 3.268414] RPC: Registered named UNIX socket transport module.
[ 3.268417] RPC: Registered udp transport module.
[ 3.268419] RPC: Registered tcp transport module.
[ 3.268420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.276911] NFS: Registering the id_resolver key type
[ 3.276926] FS-Cache: Netfs 'nfs' registered for caching
[ 3.278556] systemd-modules-load[166]: Inserted module 'nfs'
[ 3.286940] ACPI: acpi_idle registered with cpuidle
[ 3.288047] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.288053] ACPI: Power Button [PWRB]
[ 3.288131] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.288135] ACPI: Power Button [PWRF]
[ 3.295824] vboxdrv: Found 6 processor cores.
[ 3.296531] VBoxDrv: dbg - g_abExecMemory=ffffffffa030f0e0
[ 3.296654] vboxdrv: fAsync=0 offMin=0x243 offMax=0x3ca8
[ 3.296998] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 3.297001] vboxdrv: Successfully loaded version 4.1.18_OSE (interface 0x00190000).
[ 3.304254] vboxpci: IOMMU not found (not registered)
[ 3.319963] usb 12-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
[ 3.320931] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.321050] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[ 3.330200] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc900125e0000, 50:e5:49:b9:1f:d0, XID 0c900800 IRQ 42
[ 3.330205] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.348333] sp5100_tco: SP5100 TCO WatchDog Timer Driver v0.01
[ 3.348605] sp5100_tco: mmio address 0xb8fe00 already in use
[ 3.352177] Linux media interface: v0.10
[ 3.357228] Linux video capture interface: v2.00
[ 3.359297] wmi: Mapper loaded
[ 3.370276] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.372428] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 3.378726] EDAC MC: Ver: 2.1.0
[ 3.380791] cx88/0: cx2388x v4l2 driver version 0.0.9 loaded
[ 3.384226] MCE: In-kernel MCE decoding enabled.
[ 3.385118] AMD64 EDAC driver v3.4.0
[ 3.393131] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.9 loaded
[ 3.400869] powernow-k8: Found 1 AMD FX(tm)-6100 Six-Core Processor (6 cpu cores) (version 2.20.00)
[ 3.400885] powernow-k8: Core Performance Boosting: on.
[ 3.400938] powernow-k8: 0 : pstate 0 (3300 MHz)
[ 3.400941] powernow-k8: 1 : pstate 1 (3000 MHz)
[ 3.400943] powernow-k8: 2 : pstate 2 (2400 MHz)
[ 3.400945] powernow-k8: 3 : pstate 3 (1800 MHz)
[ 3.400946] powernow-k8: 4 : pstate 4 (1400 MHz)
[ 3.401767] em28xx: New device PCTV Systems PCTV 290e @ 480 Mbps (2013:024f, interface 0, class 0)
[ 3.401770] em28xx: DVB interface 0 found
[ 3.402055] em28xx #0: chip ID is em28174
[ 3.402381] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[ 3.403038] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 3.403584] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[ 3.404207] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 3.404476] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 3.405152] microcode: CPU0: patch_level=0x06000613
[ 3.405460] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[ 3.405745] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[ 3.406187] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[ 3.409709] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251)
[ 3.409716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.410141] hda_intel: Disabling MSI
[ 3.415719] EDAC amd64: DRAM ECC disabled.
[ 3.415729] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.415731] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.415735] (Note that use of the override may cause unknown side effects.)
[ 3.418826] nvidia: module license 'NVIDIA' taints kernel.
[ 3.418829] Disabling lock debugging due to kernel taint
[ 3.425250] firewire_ohci 0000:06:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 3.427571] cx88[0]: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44,autodetected], frontend(s): 1
[ 3.427574] cx88[0]: TV tuner type 4, Radio tuner type -1
[ 3.431827] Registered IR keymap rc-rc6-mce
[ 3.432317] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e017) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb2/2-2/2-2:1.0/rc/rc0/input11
[ 3.432323] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e017) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb2/2-2/2-2:1.0/rc/rc0
[ 3.434938] IR NEC protocol handler initialized
[ 3.437835] IR RC5(x) protocol handler initialized
[ 3.439896] IR RC6 protocol handler initialized
[ 3.442347] IR JVC protocol handler initialized
[ 3.444354] IR Sony protocol handler initialized
[ 3.447188] IR SANYO protocol handler initialized
[ 3.448468] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input12
[ 3.449321] IR MCE Keyboard/mouse protocol handler initialized
[ 3.452410] lirc_dev: IR Remote Control driver registered, major 250
[ 3.453439] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
[ 3.453442] IR LIRC bridge handler initialized
[ 3.460209] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 3.460211] dw2102: start downloading DW210X firmware
[ 3.462835] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.462949] microcode: CPU1: patch_level=0x06000613
[ 3.477597] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.477663] microcode: CPU2: patch_level=0x06000613
[ 3.479968] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.480257] microcode: CPU3: patch_level=0x06000613
[ 3.481624] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.481723] microcode: CPU4: patch_level=0x06000613
[ 3.482262] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.482349] microcode: CPU5: patch_level=0x06000613
[ 3.482706] microcode: failed to load file amd-ucode/microcode_amd_fam15h.bin
[ 3.482841] microcode: Microcode Update Driver: v2.00 <***@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.578476] mceusb 2-2:1.0: Registered Formosa21 SnowflakeEmulation with mce emulator interface version 1
[ 3.578484] usb 18-1: new full-speed USB device number 2 using ohci_hcd
[ 3.578490] mceusb 2-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
[ 3.578517] usbcore: registered new interface driver mceusb
[ 3.611805] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 3.611907] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3.612284] DVB: registering new adapter (TeVii S660 USB)
[ 3.710809] em28xx #0: Identified as PCTV nanoStick T2 290e (card=78)
[ 3.734960] Registered IR keymap rc-pinnacle-pctv-hd
[ 3.735051] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb2/2-1/rc/rc1/input13
[ 3.735102] rc1: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb2/2-1/rc/rc1
[ 3.736504] em28xx #0: v4l2 driver version 0.1.3
[ 3.750725] em28xx #0: V4L2 video device registered as video0
[ 3.752614] usbcore: registered new interface driver em28xx
[ 3.766775] tda18271 2-0060: creating new instance
[ 3.774515] TDA18271HD/C2 detected @ 2-0060
[ 3.852454] dvb-usb: MAC address: 00:18:bd:5b:54:40
[ 3.857024] DS3000 chip version: 0.192 attached.
[ 3.857321] dw2102: Attached ds3000+ds2020!
[ 3.857322]
[ 3.857325] DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
[ 3.858203] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 3.858222] dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
[ 3.858580] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[ 3.858582] dw2102: start downloading DW210X firmware
[ 3.925010] firewire_core 0000:06:0e.0: created device fw0: GUID 0049e550b2e80400, S400
[ 4.001500] usb 18-4: new full-speed USB device number 3 using ohci_hcd
[ 4.011486] dvb-usb: found a 'TeVii S660 USB' in warm state.
[ 4.011586] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.011896] DVB: registering new adapter (TeVii S660 USB)
[ 4.079657] DVB: registering new adapter (em28xx #0)
[ 4.079660] DVB: registering adapter 2 frontend 0 (Sony CXD2820R)...
[ 4.080000] em28xx #0: Successfully loaded em28xx-dvb
[ 4.080004] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 4.161385] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[ 4.161502] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[ 4.161619] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[ 4.161752] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[ 4.162577] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.162821] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 302.17 Tue Jun 12 16:03:22 PDT 2012
[ 4.195225] systemd-udevd[480]: failed to execute '/usr/lib/udev/ok_pcscd_hotplug.sh' 'ok_pcscd_hotplug.sh': No such file or directory
[ 4.197118] systemd-udevd[483]: failed to execute '/usr/lib/udev/ok_pcscd_hotplug.sh' 'ok_pcscd_hotplug.sh': No such file or directory
[ 4.200602] usbcore: registered new interface driver usbserial
[ 4.200624] usbcore: registered new interface driver usbserial_generic
[ 4.200697] USB Serial support registered for generic
[ 4.232608] dvb-usb: MAC address: 00:18:bd:5b:54:41
[ 4.235369] DS3000 chip version: 0.192 attached.
[ 4.235597] dw2102: Attached ds3000+ds2020!
[ 4.235598]
[ 4.235614] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[ 4.236092] dvb-usb: TeVii S660 USB successfully initialized and connected.
[ 4.236134] usbcore: registered new interface driver dw2102
[ 4.277850] usb 17-1: new high-speed USB device number 2 using ehci_hcd
[ 4.403525] usbserial: USB Serial Driver core
[ 4.404309] usbcore: registered new interface driver cp210x
[ 4.404322] USB Serial support registered for cp210x
[ 4.404422] cp210x 18-1:1.0: cp210x converter detected
[ 4.425848] dvb-usb: found a 'Hauppauge Nova-T 500 Dual DVB-T' in warm state.
[ 4.425906] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 4.426152] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 4.529289] DVB: registering adapter 4 frontend 0 (DiBcom 3000MC/P)...
[ 4.534331] usb 18-1: reset full-speed USB device number 2 using ohci_hcd
[ 4.534885] MT2060: successfully identified (IF1 = 1252)
[ 4.593953] cx88[0]/0: found at 0000:06:07.0, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
[ 4.594139] cx88[0]/0: registered device video1 [v4l2]
[ 4.594171] cx88[0]/0: registered device vbi0
[ 4.594196] cx88[0]/2: cx2388x 8802 Driver Manager
[ 4.594213] cx88[0]/2: found at 0000:06:07.2, rev: 5, irq: 21, latency: 32, mmio: 0xf9000000
[ 4.597817] cx88/2: cx2388x dvb driver version 0.0.9 loaded
[ 4.597821] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 4.597824] cx88[0]/2: subsystem: 18ac:db50, board: DViCO FusionHDTV DVB-T Dual Digital [card=44]
[ 4.597828] cx88[0]/2: cx2388x based DVB/ATSC card
[ 4.597841] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 4.601834] DVB: registering new adapter (cx88[0])
[ 4.601837] DVB: registering adapter 3 frontend 0 (Zarlink MT352 DVB-T)...
[ 4.687753] usb 18-1: cp210x converter now attached to ttyUSB0
[ 4.810784] usb 11-2: new full-speed USB device number 2 using ohci_hcd
[ 4.995343] usbcore: registered new interface driver usbhid
[ 4.995345] usbhid: USB HID core driver
[ 4.999048] ortek 0003:05A4:2000.0001: Fixing up logical minimum in report descriptor (Ortek)
[ 4.999236] input: ORTEK Smartpad Keyboard as /devices/pci0000:00/0000:00:12.0/usb11/11-2/11-2:1.0/input/input18
[ 4.999405] ortek 0003:05A4:2000.0001: input,hidraw0: USB HID v1.10 Keyboard [ORTEK Smartpad Keyboard] on usb-0000:00:12.0-2/input0
[ 5.004576] input: ORTEK Smartpad Keyboard as /devices/pci0000:00/0000:00:12.0/usb11/11-2/11-2:1.1/input/input19
[ 5.005401] ortek 0003:05A4:2000.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [ORTEK Smartpad Keyboard] on usb-0000:00:12.0-2/input1
[ 5.040978] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 5.041177] DVB: registering new adapter (Hauppauge Nova-T 500 Dual DVB-T)
[ 5.047118] DVB: registering adapter 5 frontend 0 (DiBcom 3000MC/P)...
[ 5.051717] MT2060: successfully identified (IF1 = 1242)
[ 5.582318] dvb-usb: Hauppauge Nova-T 500 Dual DVB-T successfully initialized and connected.
[ 5.582444] dib0700: rc submit urb failed
[ 5.582445]
[ 5.582642] usbcore: registered new interface driver dvb_usb_dib0700
[ 5.728942] Btrfs loaded
[ 5.729437] device fsid e0b3363c-9a13-4e53-9cd7-9c569271ea29 devid 2 transid 336060 /dev/sdc1
[ 5.756444] device fsid feeffb5f-cb04-4295-9758-9184717bfa31 devid 1 transid 75902 /dev/sdc5
[ 5.785251] device fsid e6c092cd-ccb3-47b6-976a-0096b1795359 devid 1 transid 663 /dev/sdb
[ 5.807493] device fsid e0b3363c-9a13-4e53-9cd7-9c569271ea29 devid 1 transid 336060 /dev/sdb1
[ 5.828225] device fsid b7d1bc68-45a1-493e-bfaa-d2d134b63fe6 devid 1 transid 7 /dev/sdb2
[ 7.481761] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 7.481822] Pid: 0, comm: swapper/2 Tainted: P O 3.4.4-1-custom #1
[ 7.481824] Call Trace:
[ 7.481825] <IRQ> [<ffffffff810cd82d>] __report_bad_irq+0x3d/0xe0
[ 7.481835] [<ffffffff810cdb29>] note_interrupt+0x1a9/0x200
[ 7.481838] [<ffffffff810cb4be>] handle_irq_event_percpu+0xbe/0x270
[ 7.481841] [<ffffffff810cb6b8>] handle_irq_event+0x48/0x70
[ 7.481845] [<ffffffff810ce61a>] handle_fasteoi_irq+0x5a/0x100
[ 7.481848] [<ffffffff810166b2>] handle_irq+0x22/0x40
[ 7.481852] [<ffffffff8142b5aa>] do_IRQ+0x5a/0xe0
[ 7.481854] [<ffffffff81428fea>] common_interrupt+0x6a/0x6a
[ 7.481856] <EOI> [<ffffffff8101c659>] ? read_tsc+0x9/0x20
[ 7.481875] [<ffffffffa01b5007>] ? acpi_idle_enter_simple+0xf9/0x13d [processor]
[ 7.481883] [<ffffffffa01b5003>] ? acpi_idle_enter_simple+0xf5/0x13d [processor]
[ 7.481888] [<ffffffff8133f6de>] cpuidle_enter+0x1e/0x20
[ 7.481891] [<ffffffff8133fd26>] cpuidle_idle_call+0xa6/0x330
[ 7.481894] [<ffffffff8101eb3f>] cpu_idle+0xbf/0x130
[ 7.481897] [<ffffffff81418038>] start_secondary+0x203/0x20a
[ 7.481900] handlers:
[ 7.481960] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482060] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482162] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482264] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482364] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482467] [<ffffffffa000a570>] usb_hcd_irq
[ 7.482572] [<ffffffffa0195050>] azx_interrupt
[ 7.482683] Disabling IRQ #18

Udo van den Heuvel

2012-07-09 16:05:50 UTC