Web2py freezing on live deployment!

[Andrew Buchan]

Hi,

I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.

I don't know how to find out what's going wrong. It's a relatively recent
build of web2py, and I don't want to upgrade to throw yet another variable
in there (there also been changes to the server it uses fro its mail
function, though that seems to work fine, and we just removed IIS from the
same server).

Any ideas why web2py would just freeze?
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Willoughby]

Are you running Microsoft Endpoint Security? I have problems with the
virus scanner 'locking up' things under even light usage. One or two users
can bang all day, no problem but get more than 10 and it randomly freezes.
Our fix was to exclude pretty much anything Python related. YMMV.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively recent
build of web2py, and I don't want to upgrade to throw yet another variable
in there (there also been changes to the server it uses fro its mail
function, though that seems to work fine, and we just removed IIS from the
same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Thanks Willoughby,

We've got McAffee on that network, so have asked the IT guy to set it to
ignore python and web2py folders. Will let you know what the upshot is once
that's in place...

Regards,

Andy.

Post by Willoughby
Are you running Microsoft Endpoint Security? I have problems with the
virus scanner 'locking up' things under even light usage. One or two users
can bang all day, no problem but get more than 10 and it randomly freezes.
Our fix was to exclude pretty much anything Python related. YMMV.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively recent
build of web2py, and I don't want to upgrade to throw yet another variable
in there (there also been changes to the server it uses fro its mail
function, though that seems to work fine, and we just removed IIS from the
same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[LightDot]

Which version of web2py is it? Are you using gevent or rocket web server?

Can you try load testing your devel version and see if you can replicate
the issue? You can use something like siege or a similar tool.

Regards

Post by Andrew Buchan
Thanks Willoughby,
We've got McAffee on that network, so have asked the IT guy to set it to
ignore python and web2py folders. Will let you know what the upshot is once
that's in place...
Regards,
Andy.

Post by Willoughby
Are you running Microsoft Endpoint Security? I have problems with the
virus scanner 'locking up' things under even light usage. One or two users
can bang all day, no problem but get more than 10 and it randomly freezes.
Our fix was to exclude pretty much anything Python related. YMMV.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively
recent build of web2py, and I don't want to upgrade to throw yet another
variable in there (there also been changes to the server it uses fro its
mail function, though that seems to work fine, and we just removed IIS from
the same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

It's running on rocket. I now think it's dying during a specific ajax call,
but only some of the time and/or shortly after its called (there's usually
a page load after it) and/or when it's excessively busy. Not sure if siege
can automate the button clicks that trigger the ajax calls but I might be
able to do something with selenium...

Post by LightDot
Which version of web2py is it? Are you using gevent or rocket web server?
Can you try load testing your devel version and see if you can replicate
the issue? You can use something like siege or a similar tool.
Regards

Post by Andrew Buchan
Thanks Willoughby,
We've got McAffee on that network, so have asked the IT guy to set it to
ignore python and web2py folders. Will let you know what the upshot is once
that's in place...
Regards,
Andy.

Post by Willoughby
Are you running Microsoft Endpoint Security? I have problems with the
virus scanner 'locking up' things under even light usage. One or two users
can bang all day, no problem but get more than 10 and it randomly freezes.
Our fix was to exclude pretty much anything Python related. YMMV.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively
recent build of web2py, and I don't want to upgrade to throw yet another
variable in there (there also been changes to the server it uses fro its
mail function, though that seems to work fine, and we just removed IIS from
the same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Ok, the IT guy has disabled McAffee's "on access" scan for the folders
containing web2py stuff as well as python's installation directory. He
tells me that parts of McAffee other than "on access" scan may still
interfere but there's not much we can do about that. This hasn't made any
difference.
As for the ajax calls, I thought it might be to do with the asynchronous
calls taking too long when the server is overloaded (and it seems it is
being hammered intermittently by another application), but I checked my
web2py_ajax.html file and the ajax function is set to "async: false", so
there shouldn't be an issue there unless there is some kind of timeout that
kicks in?

But.... I was about to post the above when I did some checks on the ajax
calls, and am a bit confused...
I have two javascript functions which call ajax:

#Function1: This call displays a check list of 'previous contracts' to
pick from
ajax('HubForms/Timesheets/AjaxReturnBlank', [],
'PreviousContractListingArea');

#Function2: Once user has check some items, they click a button to call
this, which adds all selected contracts to timesheet, then reloads the page.
jQuery('.PreviousContractCheckbox').each(
function(index)
{
if(this.checked)
{
jQuery('#ContractId').val(this.name);
ajax('HubForms/Timesheets/AjaxAddContractToTimesheet',
['ContractId', 'TimesheetId', 'UserId']);
}
}
);
a='nothing, just works';
window.location='HubForms/Timesheets/ViewTimesheet?Timesheet_Id=15995';
location.reload(true);

I temporarily modified the ajax function in web2py_ajax.html to display a
pop-up, then wait 3 seconds before executing (last 4 lines modified):

function ajax(u,s,t) {
var query="";
for(i=0; i<s.length; i++) {
if(i>0) query=query+"&";

query=query+encodeURIComponent(s[i])+"="+encodeURIComponent(document.getElementById(s[i]).value);
}
/*this line:
jQuery.ajax({type: "POST", url: u, data: query, async: false,
success: function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } });
replaced by these 4 lines:
*/
alert('hi');
setTimeout(function(){
jQuery.ajax({type: "POST", url: u, data: query, async: false, success:
function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } })
},3000);
}

The funny thing is that my Function1 does this (says 'hi' then pauses for 3
seconds), but Function2 says 'hi' for every item selected as you'd expect,
but does NOT pause...
This is making me wonder whether web2py's ajax function behaves differently
when called from inside jQuery().each() as the setTimeout() is being
ignored...?
If that is the case then perhaps the directive to use "async: false" is not
being taken into account in this scenario?

Any javascript knowledgeable people able to help on this one?
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Update:

I made a copy of the web2py installation on a new server (still pointing to
old database) and eventually got it set it up as a service but it still
freezes with no errors in web2py or in the event manager...

I'm pretty sure it's a programming error on my part somewhere or a
migration issue, but I need to be able to find out what it is!!! (people
are getting tetchy...)

I went back to the original server and tried debugging using winpdb, and it
seems web2py gets stuck in a perpetual loop. When I pause, it tends to stop
in the "run" or "listen" methods in rocket.py, or "accept" in socket.py
(python installation dir), so the thread is running, just in a loop and not
responding to new requests...

I'm thinking of putting the server onto apache to see if it behaves any
differently, but if anyone has any bright suggestions on what I can do to
find out what's going, I'm all ears :-)
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

Check the logs, find the last line in the log - that's probably what caused
the freeze. Check your logging.conf to find out where the logs are kept.

Post by Andrew Buchan
I made a copy of the web2py installation on a new server (still pointing
to old database) and eventually got it set it up as a service but it
still freezes with no errors in web2py or in the event manager...
I'm pretty sure it's a programming error on my part somewhere or a
migration issue, but I need to be able to find out what it is!!! (people
are getting tetchy...)
I went back to the original server and tried debugging using winpdb, and
it seems web2py gets stuck in a perpetual loop. When I pause, it tends to
stop in the "run" or "listen" methods in rocket.py, or "accept" in
socket.py (python installation dir), so the thread is running, just in a
loop and not responding to new requests...
I'm thinking of putting the server onto apache to see if it behaves any
differently, but if anyone has any bright suggestions on what I can do to
find out what's going, I'm all ears :-)

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Hi Derek,

Thanks for replying, I had checked those but the last entry was months old,
so that was a dead end.

I finally got web2py running on Apache, though it took me till 5 am :-)
(ps: if anyone else plans on attempting to install Apache on Windows
against MSSQL, I'm happy to help out or write a tutorial, it wasn't
straightforward! Feel free to pm me)

I left both the rocket and the apache web2py installs live running on
separate servers (pointing to same database) and advised the users to work
on both. When I checked after a few hours, the rocket one had become
unresponsive, and apache was still running fine.

I think the problem is something to do with to the server being overloaded,
and perhaps ajax calls time out and holding locks on the sessions files,
causing the whole thing to become unresponsive. There were multiple threads
interacting with the same session files judging from the debugger... If
anyone would like me to do more investigation on this, I'm happy to help so
long as you tell me where to look.

Apache also caused a rather funny issue... A set of ajax calls which were
meant to run synchronously (because of "async: false" flag) was failing to
complete before page reload, whereas it always did before, leading me to
think Apache was not running it synchronously as instructed. What I think
is happening is that the ajax call never ran synchronously in the first
place (it's in a jQuery.each() loop) but on rocket it always finished on
time before the page reload, and apache seems to reload way faster so
caught me out.
Word to the wise: check any assumptions you make about ajax running
synchronously or not, especially as async: false is deprecated in jQuery
1.8.

Post by Derek
Check the logs, find the last line in the log - that's probably what
caused the freeze. Check your logging.conf to find out where the logs are
kept.

Post by Andrew Buchan
I made a copy of the web2py installation on a new server (still pointing
to old database) and eventually got it set it up as a service but it
still freezes with no errors in web2py or in the event manager...
I'm pretty sure it's a programming error on my part somewhere or a
migration issue, but I need to be able to find out what it is!!! (people
are getting tetchy...)
I went back to the original server and tried debugging using winpdb, and
it seems web2py gets stuck in a perpetual loop. When I pause, it tends to
stop in the "run" or "listen" methods in rocket.py, or "accept" in
socket.py (python installation dir), so the thread is running, just in a
loop and not responding to new requests...
I'm thinking of putting the server onto apache to see if it behaves any
differently, but if anyone has any bright suggestions on what I can do to
find out what's going, I'm all ears :-)
--

- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Ricardo Pedroso]

Post by Andrew Buchan
Ok, the IT guy has disabled McAffee's "on access" scan for the folders
containing web2py stuff as well as python's installation directory. He
tells me that parts of McAffee other than "on access" scan may still
interfere but there's not much we can do about that. This hasn't made any
difference.
As for the ajax calls, I thought it might be to do with the asynchronous
calls taking too long when the server is overloaded (and it seems it is
being hammered intermittently by another application), but I checked my
web2py_ajax.html file and the ajax function is set to "async: false", so
there shouldn't be an issue there unless there is some kind of timeout that
kicks in?
But.... I was about to post the above when I did some checks on the ajax
calls, and am a bit confused...
#Function1: This call displays a check list of 'previous contracts' to
pick from
ajax('HubForms/Timesheets/AjaxReturnBlank', [],
'PreviousContractListingArea');
#Function2: Once user has check some items, they click a button to call
this, which adds all selected contracts to timesheet, then reloads the page.
jQuery('.PreviousContractCheckbox').each(
function(index)
{
if(this.checked)
{
jQuery('#ContractId').val(this.name);
ajax('HubForms/Timesheets/AjaxAddContractToTimesheet',
['ContractId', 'TimesheetId', 'UserId']);
}
}
);
a='nothing, just works';
window.location='HubForms/Timesheets/ViewTimesheet?Timesheet_Id=15995';
location.reload(true);
I temporarily modified the ajax function in web2py_ajax.html to display a
function ajax(u,s,t) {
var query="";
for(i=0; i<s.length; i++) {
if(i>0) query=query+"&";
query=query+encodeURIComponent(s[i])+"="+encodeURIComponent(document.getElementById(s[i]).value);
}
jQuery.ajax({type: "POST", url: u, data: query, async: false,
success: function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } });
*/
alert('hi');
setTimeout(function(){
function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } })
},3000);
}
The funny thing is that my Function1 does this (says 'hi' then pauses for
3 seconds), but Function2 says 'hi' for every item selected as you'd
expect, but does NOT pause...
This is making me wonder whether web2py's ajax function behaves
differently when called from inside jQuery().each() as the setTimeout()
is being ignored...?

I don't have a solution for your problem, if you could make a minimal
application that replicates the problem, it would
be easy to track it down.

setTimeout will not pause javascript execution, it will only put the given
function in a "queue" to be processed later.

Why are you doing an ajax call for each item checked?
I think you could just make one ajax call with a list of checked items, it
would be more efficient.
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

Yea, the ajax running synchronously - you provide callbacks because they do
run asynchronously.
To quote the jQuery book:

The* first letter in Ajax stands for "asynchronous,"* meaning that the
operation occurs in parallel and the order of completion is not guaranteed.
The async option to $.ajax() defaults to true, indicating that code
execution can continue after the request is made. Setting this option to
false (and thus making the call no longer asynchronous) is strongly
discouraged, as it can cause the browser to become unresponsive.

Just what kind of app do you have that needs to make synchronous requests?
Why are you not batching requests and processing async?

Post by Ricardo Pedroso

Post by Andrew Buchan
Ok, the IT guy has disabled McAffee's "on access" scan for the folders
containing web2py stuff as well as python's installation directory. He
tells me that parts of McAffee other than "on access" scan may still
interfere but there's not much we can do about that. This hasn't made any
difference.
As for the ajax calls, I thought it might be to do with the asynchronous
calls taking too long when the server is overloaded (and it seems it is
being hammered intermittently by another application), but I checked my
web2py_ajax.html file and the ajax function is set to "async: false", so
there shouldn't be an issue there unless there is some kind of timeout that
kicks in?
But.... I was about to post the above when I did some checks on the ajax
calls, and am a bit confused...
#Function1: This call displays a check list of 'previous contracts' to
pick from
ajax('HubForms/Timesheets/AjaxReturnBlank', [],
'PreviousContractListingArea');
#Function2: Once user has check some items, they click a button to call
this, which adds all selected contracts to timesheet, then reloads the page.
jQuery('.PreviousContractCheckbox').each(
function(index)
{
if(this.checked)
{
jQuery('#ContractId').val(this.name);
ajax('HubForms/Timesheets/AjaxAddContractToTimesheet',
['ContractId', 'TimesheetId', 'UserId']);
}
}
);
a='nothing, just works';
window.location='HubForms/Timesheets/ViewTimesheet?Timesheet_Id=15995';
location.reload(true);
I temporarily modified the ajax function in web2py_ajax.html to display a
function ajax(u,s,t) {
var query="";
for(i=0; i<s.length; i++) {
if(i>0) query=query+"&";
query=query+encodeURIComponent(s[i])+"="+encodeURIComponent(document.getElementById(s[i]).value);
}
jQuery.ajax({type: "POST", url: u, data: query, async: false,
success: function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } });
*/
alert('hi');
setTimeout(function(){
function(msg) { if(t==':eval') eval(msg); else
document.getElementById(t).innerHTML=msg; } })
},3000);
}
The funny thing is that my Function1 does this (says 'hi' then pauses for
3 seconds), but Function2 says 'hi' for every item selected as you'd
expect, but does NOT pause...
This is making me wonder whether web2py's ajax function behaves
differently when called from inside jQuery().each() as the setTimeout()
is being ignored...?

I don't have a solution for your problem, if you could make a minimal
application that replicates the problem, it would
be easy to track it down.
setTimeout will not pause javascript execution, it will only put the given
function in a "queue" to be processed later.
Why are you doing an ajax call for each item checked?
I think you could just make one ajax call with a list of checked items, it
would be more efficient.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

McAfee always seems to block things incorrectly, at least for me.

Post by Andrew Buchan
Thanks Willoughby,
We've got McAffee on that network, so have asked the IT guy to set it to
ignore python and web2py folders. Will let you know what the upshot is once
that's in place...
Regards,
Andy.

Post by Willoughby
Are you running Microsoft Endpoint Security? I have problems with the
virus scanner 'locking up' things under even light usage. One or two users
can bang all day, no problem but get more than 10 and it randomly freezes.
Our fix was to exclude pretty much anything Python related. YMMV.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively
recent build of web2py, and I don't want to upgrade to throw yet another
variable in there (there also been changes to the server it uses fro its
mail function, though that seems to work fine, and we just removed IIS from
the same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

Ah, if you are on Windows, I would recommend you run it with gevent instead
of rocket, it should be faster than even apache.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively recent
build of web2py, and I don't want to upgrade to throw yet another variable
in there (there also been changes to the server it uses fro its mail
function, though that seems to work fine, and we just removed IIS from the
same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

I'll also add this:
look at anyserver.py for how to get it going...

also, gevent does monkey.patch_all which means that all your tcp sockets
would become async, which means if you are freezing up because a single
connection is frozen, that won't be the case with gevent. Your individual
connections would still be waiting but the server will process other
requests while it waits for data. In other words, while one client may
freeze up, the rest should process just fine.

Post by Derek
Ah, if you are on Windows, I would recommend you run it with gevent
instead of rocket, it should be faster than even apache.

Post by Andrew Buchan
Hi,
I have a serious issue. Got a web2py install running as a service on a
Windows 2003 box with SQL Server, with applications serving 100s of users
in-house. We have a live and test application running on the same install
but pointing to different databases, and due to things not being released
these have diverged quote a bit over the months. We just managed to
reconcile these (with carefully supervised migration - one table at a time)
last week, and the problems started happening. Web2py becomes unresponsive
after a period of use - it just hangs when you try to load a page. There
are no errors in web2py, in the event manager, or SQL. Rolling back those
changes is tricky, as there have been changes to the database and data has
already been added..
When left running over the weekend, its fine. If I try accessing every
page, it's fine (or at least, I can't break it). If it goes into proper use
with lots of other people accessing it, it crashes.
I don't know how to find out what's going wrong. It's a relatively recent
build of web2py, and I don't want to upgrade to throw yet another variable
in there (there also been changes to the server it uses fro its mail
function, though that seems to work fine, and we just removed IIS from the
same server).
Any ideas why web2py would just freeze?

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Niphlod]

Post by Derek
Ah, if you are on Windows, I would recommend you run it with gevent
instead of rocket, it should be faster than even apache.
unfortunately it doesn't work as happily as it should: if you're using any

non-green module (he's working with mssql, hence either pyodbc or pypyodbc,
that are not), those libraries don't "yield", so you block all other
greenlets in the meantime.
Without an upstream proxy balancing to multiple gevented web2py(s) if you
have a "blocking" query to the database you queue up basically all other
connections. I guess that without an apache ProxyBalancer (or a much
yummier gunicorn, as it stands due in two months<https://github.com/benoitc/gunicorn/issues/524>)
those web2py windows apps with non-green modules will run more
"concurrently-friendly" with any "old" threaded webserver.
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

Yea, I'm working on a communication layer for pyodbc or pypyodbc which will
handle requests with gevent, thus your application should yield properly,
but it's not available just yet, and it won't necessarily be a drop-in
replacement for pyodbc though. In the meantime, this is usually good
enough, and you can set timeouts for the queries and connects, but that
would be a change to the DAL.

Post by Derek
Ah, if you are on Windows, I would recommend you run it with gevent
instead of rocket, it should be faster than even apache.
unfortunately it doesn't work as happily as it should: if you're using

any non-green module (he's working with mssql, hence either pyodbc or
pypyodbc, that are not), those libraries don't "yield", so you block all
other greenlets in the meantime.
Without an upstream proxy balancing to multiple gevented web2py(s) if you
have a "blocking" query to the database you queue up basically all other
connections. I guess that without an apache ProxyBalancer (or a much
yummier gunicorn, as it stands due in two months<https://github.com/benoitc/gunicorn/issues/524>)
those web2py windows apps with non-green modules will run more
"concurrently-friendly" with any "old" threaded webserver.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

It does look like there is a pure python implementation of TDS called
pytds, which may actually work... the hard part would be getting web2py to
use it...

Post by Derek
Yea, I'm working on a communication layer for pyodbc or pypyodbc which
will handle requests with gevent, thus your application should yield
properly, but it's not available just yet, and it won't necessarily be a
drop-in replacement for pyodbc though. In the meantime, this is usually
good enough, and you can set timeouts for the queries and connects, but
that would be a change to the DAL.

Post by Derek
Ah, if you are on Windows, I would recommend you run it with gevent
instead of rocket, it should be faster than even apache.
unfortunately it doesn't work as happily as it should: if you're using

any non-green module (he's working with mssql, hence either pyodbc or
pypyodbc, that are not), those libraries don't "yield", so you block all
other greenlets in the meantime.
Without an upstream proxy balancing to multiple gevented web2py(s) if you
have a "blocking" query to the database you queue up basically all other
connections. I guess that without an apache ProxyBalancer (or a much
yummier gunicorn, as it stands due in two months<https://github.com/benoitc/gunicorn/issues/524>)
those web2py windows apps with non-green modules will run more
"concurrently-friendly" with any "old" threaded webserver.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Niphlod]

hard ? with DAL it's pretty easy.... if a module exposes the dbapi just
force the driver and implement the connect method and it's usually good to
go.
I'll test it when I get back home.
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Thanks for the suggestions, gevent looks good but I am indeed using pyodbc
and this seems to be working with Apache so I'd rather stick with this for
time being. (Note I had to embedd the Python27.dll manifest into pyodbc.pyd
to get it to work with Apache).

The reason for using ajax in the first place was naivety. At the time I
simply looked up how to call a controller function from javascript and read
that ajax() was the way to do it, so proceeded with that without
understanding the implications.

The feature in question is a check list, which I go over with
jQuery.each(). If checked: copy the value to a hidden field, and call ajax
to insert a record in the database including that field and couple others.
Once done, set windows.location to same page to reaload it.
The page has a form on it elsewhere, so I didn't want to make this a form
as I kept getting a "confirm resubmission" popup (this is going from
memory, it was actually written a long time ago).

I've now changed it so each() collate all the values into a string (they're
ints) and pass to a url which I navigate to with windows.location, that
page does the insert and returns back to previous page. No ajax in there
whatsoever :-)
I'm scouring the code for other places where I may have placed asynchronous
calls next to synchronous ones, which will only have worked by
"coincidence" up till now...
I know, I know. I might just pick up my copy of the pragmatic programmer
and throw it at myself. Hard.

Post by Niphlod
hard ? with DAL it's pretty easy.... if a module exposes the dbapi just
force the driver and implement the connect method and it's usually good to
go.
I'll test it when I get back home.
--
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Tim Richardson]

I had a puzzling problem with 2.7.4 as a rocket service on Windows 2003,
but this was a problem with sqlform.grids. There was a print statement left
in code which caused the service to stop working. This cause doesn't match
with your insights into the problem, but I mention it anyway. You only see
the problem when web2py is running as a service (I use nssm to create the
service, but this is not relevant).
The problem was very quickly fixed in trunk, but as far as I know the fix
is not in any stable version yet.
I'm still using 2.6.4 for production apps in this scenario (rocket as a
service on windows server).

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Yes, I've been caught out by that quite a few times! Not a problem with
Apached I may add, the wsgi file redirects stdout to show up in the apache
error log, but I suppose you could point it anywhere really.

I had a puzzling problem with 2.7.4 as a rocket service on Windows 2003,

but this was a problem with sqlform.grids. There was a print statement left
in code which caused the service to stop working. This cause doesn't match
with your insights into the problem, but I mention it anyway. You only see
the problem when web2py is running as a service (I use nssm to create the
service, but this is not relevant).
The problem was very quickly fixed in trunk, but as far as I know the fix
is not in any stable version yet.
I'm still using 2.6.4 for production apps in this scenario (rocket as a
service on windows server).

--
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

any luck?

Post by Niphlod
hard ? with DAL it's pretty easy.... if a module exposes the dbapi just
force the driver and implement the connect method and it's usually good to
go.
I'll test it when I get back home.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Hi Derek, the install on Apache is running fine and the ajax issue it threw
up I was able to fix as described above. So my problem is solved, but
thanks for checking in again.
I found that after updating to the latest version of web2py, it was easy to
get apache running following the deployment recipes (I skipped the SSL
part) whereas with the older version I had previously, I had to do a few
hacks to get it to work.
I've not done anything since to determine what went wrong with Rocket in
the first place, and to be honest am not able to justify spending time
investigating what went wrong seeing as I have a working alternative (and
been busy trying to make up for lost time!)

Let me know if you want a copy of my httpd.conf file (anyone).

Post by Derek
any luck?

Post by Niphlod
hard ? with DAL it's pretty easy.... if a module exposes the dbapi just
force the driver and implement the connect method and it's usually good to
go.
I'll test it when I get back home.

--
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Derek]

That's cool, I was just asking about the side project of Niphlod's to look
at the pytds so that we could finally have a pure python database adapter.
With a pure python adapter, gevent could properly use greenlets to make
database queries, thus there would be no blocking on the queries.

Post by Andrew Buchan
Hi Derek, the install on Apache is running fine and the ajax issue it
threw up I was able to fix as described above. So my problem is solved, but
thanks for checking in again.
I found that after updating to the latest version of web2py, it was easy
to get apache running following the deployment recipes (I skipped the SSL
part) whereas with the older version I had previously, I had to do a few
hacks to get it to work.
I've not done anything since to determine what went wrong with Rocket in
the first place, and to be honest am not able to justify spending time
investigating what went wrong seeing as I have a working alternative (and
been busy trying to make up for lost time!)
Let me know if you want a copy of my httpd.conf file (anyone).

Post by Derek
any luck?

Post by Niphlod
hard ? with DAL it's pretty easy.... if a module exposes the dbapi just
force the driver and implement the connect method and it's usually good to
go.
I'll test it when I get back home.

--
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Further update:

Apache did finally crash, with the following message:

"Server ran out of threads to serve requests. Consider raising the
ThreadsPerChild setting"

I've bumped that up to 500, and there are less than that number of users on
the system (although I understand there will be more than one connection
fired off per user/session).
But it crashed/became unresponsive again with no error message!

I added mod_status to see what's going on, and it seems there are loads of
requests being sent to which never exit, and I can't tell where these are
being fired from as they don't indicate which virtualhost they came from
(and no url mapping). I'm waiting for approval to join apachelounge to ask
over there, but thought I'd ask here if anyone had any information on how
web2py uses/creates requests/threads in apache, and how it could be that
apache becomes unresponsive after a while. I'm not even sure it is running
out of workerthreads (I thought servers queued requests till threads became
available specifically so they wouldn't crash under heavy load).

Also, I leave sessions alone, but should I be clearing them?

Also also, I updated to the latest version of web2py and it seems someone
left a print statement in SQLFORM.grid() which prints every row! (Line 2373
in sqlhtml.py) I presume that if I were running that as a windows service
on rocket it would crash the moment you displayed a grid...
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Niphlod]

Post by Andrew Buchan
"Server ran out of threads to serve requests. Consider raising the
ThreadsPerChild setting"
I've bumped that up to 500, and there are less than that number of users
on the system (although I understand there will be more than one connection
fired off per user/session).
But it crashed/became unresponsive again with no error message!

Asking for real disasters!!!!! Are you sure that there are more than 150
(default) requests active ?

Post by Andrew Buchan
Also, I leave sessions alone, but should I be clearing them?

Yep, you definitely should (as anyone in production)

Post by Andrew Buchan
Also also, I updated to the latest version of web2py and it seems someone
left a print statement in SQLFORM.grid() which prints every row! (Line 2373
in sqlhtml.py) I presume that if I were running that as a windows service
on rocket it would crash the moment you displayed a grid..

known issue. Upgrade to trunk
--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.

[Andrew Buchan]

Hi Niphlod, what is asking for disasters? Bumping it up to 500? Can you
elaborate on why? (I'm all for avoiding disasters given what's been
happening!)
The server-status page was showing 150 worker threads active, except lots
of the seem not to be from proper requests. Here's my post on apachelounge
with more details: http://www.apachelounge.com/viewtopic.php?t=5655

Apache since became unresponsive again since, strangely I could still
access appadmin via local host, but pages in the main application weren't
responding, even from localhost... CPU and memory were both fine. Made me
wonder if I'm doing something stupid in something very top-level
application-wise (like in a model file or in layout.html), but I would
expect an error message in that case.

I'll look into clearing sessions, thanks for the tip.

Post by Niphlod

Post by Andrew Buchan
"Server ran out of threads to serve requests. Consider raising the
ThreadsPerChild setting"
I've bumped that up to 500, and there are less than that number of users
on the system (although I understand there will be more than one connection
fired off per user/session).
But it crashed/became unresponsive again with no error message!

Asking for real disasters!!!!! Are you sure that there are more than 150
(default) requests active ?

Post by Andrew Buchan
Also, I leave sessions alone, but should I be clearing them?

Yep, you definitely should (as anyone in production)

Post by Andrew Buchan
Also also, I updated to the latest version of web2py and it seems someone
left a print statement in SQLFORM.grid() which prints every row! (Line 2373
in sqlhtml.py) I presume that if I were running that as a windows service
on rocket it would crash the moment you displayed a grid..

known issue. Upgrade to trunk
--
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to a topic in the
Google Groups "web2py-users" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/web2py/PEC1uLfzlrU/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
For more options, visit https://groups.google.com/groups/opt_out.

--
Resources:
- http://web2py.com
- http://web2py.com/book (Documentation)
- http://github.com/web2py/web2py (Source code)
- https://code.google.com/p/web2py/issues/list (Report Issues)
---
You received this message because you are subscribed to the Google Groups "web2py-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to web2py+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/***@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.