Hi,
the BVA has a very small frequency calibration range.
I have solved this analogous problem on two 1000B by replacing the fixed capacitor which determines the base frequency of the resonance inside the oscillator.
I think it's the only way to solve the problem.
There are no wiring diagrams but with a little patience you can identify the capacitor and increase or decrease its value.
cheers
Luciano
Da "time-nuts" time-nuts-***@lists.febo.com
A time-***@lists.febo.com
Cc ***@rubidium.se
Data Tue, 30 Oct 2018 22:40:07 +0100
Oggetto Re: [time-nuts] Oscilloquartz 8600...
Hej Ulf,
On 10/30/18 10:18 PM, Ulf Kylenfall via time-nuts wrote:
>
> Regarding the Oscilloquartz 8600-3 that was 1 Hz off the frequency...
> I have received information off the listthat I think will be helpful.
> I will give it another try.
One of mine is off in similar sense. It can't be tuned to be sharp on 5
MHz anymore. The way that I use my main pair is as phase-noise reference
for the TimePod.
But, I'd love if I could tweak it back.
Cheers,
Magnus
> Cheers
> Ulf KylenfallSM6GXV
>
>
>
> _______________________________________________
> time-nuts mailing list -- time-***@lists.febo.com
> To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
> and follow the instructions there.
>
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-***@lists.febo.com
To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions there.